- Analysis: extended workaround for MakeMKV muxed content
- Muxing: support FLAC in mp4
- Vapoursynth: moved EdgeFixer and BalanceBorder to Frame->Edge
- Vapoursynth: vs-mlrt/torch - removed mod restrictions for TensorRT when using RIFE
- Vapoursynth: ColorFix add wavelet mode
- Input: support dpx as image sequence
- Vapoursynth: torch - DeOldify 4.5.0
- UI: make Hybrid Window resizable
- Vapoursynth: torch - VSGAN(Filter) + ColorFix
- Jobs: Chunked encoding crash with whitespace in file path
- Decode: FFmpeg color matrix handling
- Vapoursynth: torch - machine learning resizers and FilterQueue
- Vapoursynth: don't use stepped resize when Vapoursynth->Frame->Resize->Resizer is disabled)
- Decode: AutoCrop for DVD with spaces in the path; missing quotes
- Video: FFVNEnc presets
- Filtering: disable 'Filtering->FFmpeg' for 'Only use encoder'
- Decoder: set vui params for input on FFmpeg
- Avisynth: Separate Fields filtering
- Vapoursynth: torch - added ColorFix for SCUNet
- Vapoursynth: vsmlrt - added ColorFix for SCUNetmlrt (requires torch addon)
- Vapoursynth: vsmlrt - added ColorFix for VSMLRT (requires torch addon)
- Vapoursynth: vsmlrt - fix 'Multi' for VSMLRT
- Vapoursynth: torch - fix 'Multi' for VSGAN
- Vapoursynth: support Bore, FillBorders
- Vapoursynth: SoftLight require PC scale when mode != 8
- Vapoursynth: updated RIFE, RIFE(mlrt)
- Vapoursynth: use constants for Matrix, Primaries, Chroma, Luma
- Video: NVEnc/QSVEnc support --vpy-mt
- Jobs: add abort-option to size- and audio-warning onjo create&start
- Jobs: added scripts to report file
- Video: removed NVEnc input type checks
- Filtering: hide deinterlace control on progressive input, since it confuses users
- Avisynth: FFmpeg2Source use YUV422PX instead of YUY2
- Avisynth: increased suported memory max to 65536MB
- Avisynth: Hybrid now comes without Avisynth 32bit support, it is an addon now
- Video: do not check for UT Video, assume its present
- Vapoursynth: prefer BestSource as default for file input
- Vapoursynth: torch - added 'Requires'-controls to VSGAN and VSGAN Filter
- Input: Switch from Vapoursynth to Avisynth (when available) on .avs input
- Vapoursynth: TemporalDegrain2: degrainTR default and crash with degrainTR=0
- Video: x264, disable and deactivate 'auto' for color space on profile 'None'
- Video: x264, x264 - added 'adjust gop max to output fps'
- Ui: changed maximize handling
- Ui: option to set debug output path
- Vapoursynth: add masking for frame matching
- Vapoursynth: added FTF to TIVTC
- FFmpeg: don't set color signaling for pipes
- Avisynth: added 'Never use AviSource'
- Avisynth: enable avsToon for 32bit
- Video: x264 minimizeCL with 'superfast'
- Vapoursynth: FileQueue and Masking issues
- Vapoursynth: ReplaceSince
- Vapoursynth: torch - remove unnecessary resize call after VSGAN
- Extraction: use ffmpeg for ProRes from mkv extraction
- Video: SVT-AV1 typo 'enableResotration' vs 'enableRestoration'
- Vapoursynth: SMDegrain smdegrain.py script interlaced handling fixed
- Vapoursynth: mlrt - DPIR FP16 inverted
- Video: NVEnc - max bitrate initial value
- Video: NVEnc - EdgeLevel not added to command line
- Input: Zip format handling (ffmpeg and analysis)
- Synh: fix typo in CustomSynthScript QQDFPlus and abcxyz YUVALLX -> ALLYUVX
- Vapoursynth: QTGMC in CompareView with 'custom', use Preset='Fast' for original side.
- Vapoursynth: torch, VSGAN (Filter), width/height mixup
- Vapoursynth: torch, DeOldify 'render_vivid' and 'dark' passed as string instead of bool
- Vapoursynth: SmoothGrad fix min value 1
- Vapoursynth: Frame->Resize UI scaling
- Vapoursynth: torch, ProPainter 'Inference'-CheckBox not working
- Vapoursynth: cfhd handling
- Vapoursynth: SSIMD: fix output color
- Vapoursynth: letterboxing YUV422 mod2
- Vapoursynth: vsRemoveDirt defaults
- Video: FFmpegs zscale-call for PNG output
- Video: x264 slow preset using b-adapt 2 instead of 1
- FFmpeg: 2020 signaling
- Extract: vp9 video
- Model: loadfromJson respect skipList
- Avisynth: TIVTC+QTGMC
- Avisynth: fix histogram color restriction check, no YUY2 support
- Avisynth: QTGMC+Custom+UltraFast missing YadifMod2 dependency
- Avisynth: DeblockPP7 and aSharp were unnecessarily disabled for 64bit Avisynth
- Video: ProRes encoding when mencoder is used as decoder
- Vapoursynth: DecimateMode set output fps for mode 2, which is (still) broken
- Vapoursynth: RainbowSmooth require mod16
- Vapoursynth: don't try to set ColorMatrix on RGB content
- Vapoursynth: DGSharpen requires mod16
- Vapoursynth: rectangular mask for high bit depth
- Decoder: changed Avisynth input handling
- Muxing: mkv helper for ffmpeg color matrix and vfr
- Jobs: fix cleanup job handling on raw audio only output
- Jobs: fix warning handling
- Vapoursynth: GLSL Gamma, RGBAdjust filter ports(Levels broken&disabled)
- Vapoursynth: proToon
- Vapoursynth: vs_temporalfix
- Vapoursynth: torch/vmlrt option to set (trt) 'engine path'
- Avisynth: added CustomSynthScripts for 32bit and 64bit proToon-v0.75.1
- Generate output name suffix added '%DATE%','%TIME%','%TIMEMS%' replacements
- Vapoursynth: torch - add vs_colorfix for VSGAN and VSGANFilter
- Video: NVEnc, support '--vpn-nlmeans'
- Vapoursynth: initialization error
- Vapoursynth R65 torch
- Vapoursynth: do not change color matrix on RGB content
- Vapoursynth: fixed some unnecessary, popups during startup
- Video: NVEnc support --tflevel --lookahead-level
- Vapoursynth: torch, adjust to DeOldify 4.0.0
- Vapoursynth: torch, adjust to vsRealESRGAN 5.0.0
- Vapoursynth: reworked FillDuplicateFrames, FillDrops, ReplaceSingle into one class for stability
- Vapoursynth: vs-mlrt, RIFE scale support optional requires 'onnx' in Vapoursynth/Lib/site-packages, see: https://github.com/AmusementClub/vs-mlrt/issues/94
- Vapoursynth: support CPreview from hello_hello
- Vapoursynth: torch, ProPainter
- Vapoursynth: torch, adjusted to DeOldify 0.3.5.3
- Filtering: remove 'none' as auto deinterlacer handling option
- Video: NVEnc support --tflevel --lookahead-level
- Vapoursynth: another EEDI3/EEDI3CL handling
- Vapoursynth: Masking for RGBH filters
- QSVEnc: remove '--tier' during hevc encoding
- QSVEnc: set '--output-csp' (this is broken for most choices)
- Jobs: QSVEnc av1 encoding in webm
- Vapoursynth: torch, DeOldify fix FP16
- Vapoursynth: TFM/VFM, fps refresh
- Avisynth: custom with dual view
- Avisynth: interlaced output + cropView
- x265: 3.0 and 4.0 vbv values not set
- Vapoursynth: adjusted to DeOldify 0.3.5.2
- Vapoursynth: fixed RIFE + FillDrops, ReplaceSingle, FillDuplicates, ReplaceBlackFrames
- Vapoursynth: EEDI3/EEDI3CL handling
- Avisynth: Denoise filter not applied
- Avisynth: some typos in gui
- Avisynth: FrameNumber should not be in encode
- ProRes: progressive to interlaced encoding when no synth is used
- Subtitle: handling IETF BCP 47 languages
- torch-addon: adjusted to vsDeOldify
- torch-addon: updated
- Vapoursynth: experimental script highlighting option
- Vapoursynth: removed vsQTGMC order; always set to -1
- Vapoursynth: SoftLight 10bit support
- mlrt-addon: using 'engine_folder' to make sure .engine files are created in temp folder
- Avisynth: TemporalDegrain2 postFFT handling
- Vapoursynth: RGBH handling for CartoonEdges&Bloated-Edgemask
- Crop: crop with multi-input
- Muxing: mkv color signatling
- Vapoursynth: use old RIFE version for FillDrops, FillDuplicates, ReplaceSingle due to: https://github.com/styler00dollar/VapourSynth-RIFE-ncnn-Vulkan/ issues/16
- Vapoursynth: Merge not working with FilterQueue
- Vapoursynth: TemporalDegrain2 extraSharp=True crash
- mlrt-addon: SCUNet (mlrt)
- Jobs: Vapoursynth chunking call
- Avisynth: fixed TemporaDegrain(2) script/call
- Vapoursynth: option for diff to increase difference visibility
- torch-addon: VSGAN (filter only)
- torch-addon: VSGAN parameters
- Vapoursynth: BasicVSR++ added 'wanted width'
- Vapoursynth: adjusted to vsDeOldify v3.0.1
- Video: x265 adjusted to v3.6
- Vapoursynth: VIVTC 'fix combed with deinterlacer'
- Analysis: sox volume analysis
- Audio: delaycut problems
- Muxing: Crash with video pass-through
- x264: disable 'adjust letterbox to crop' when Blu-ray/AVCHD restriction is enabled
- Vapoursynth: settings used for DeOldify
- Vapoursynth: update to RIFE r9mod17
- Vapoursynth: updated (mlrt)RIFE models
- Vapoursynth: DeOldify only working when 'Chroma Stabilization' was enabled.
- Vapoursynth: SplitYUV Preview
- Vapoursynth: updated RIFE models
- Vapoursynth/Torch: update vs-deoldify
- UI: 'alwaysOnTop' caused Window to disappear
- Vapoursynth: TFMBob fps calculation
- Vapoursynth: CodeFormer in CompareView with 'undo upscale' disabled.
- FFmpeg: fixed color transfer signaling
- Vapoursynth: GMFSS_fortuna model model index
- Jobs: minimize command line glitch
- Analysis: YUV jpeg handling
- ProRes: timecode handling&detection
- Vapoursynth: BestSource library naming
- Input: Gray8 input image handling
- Vapoursynth: add custom CropView pad color
- Avisynth: (32bit) SplineResize100/144 calls
- Vapoursynth: custom section hinting accidentally required '# # ...' instead of '# ...'
- Vapoursynth: allow lowering frame rate with rife
- Vapoursynth: detect '2020 non .. ' as '2020cl'
- Vapoursynth: crop in compare view
- NoXSynth: fix subtitle embedding by changing local.conf handling
- ui: subtitle controls enabled, even when no subititles are available
- Subtitle: Support embedding subtitle when QSVEncC/NVEncC with 'only use encoder' is used.
- Torch: added DeOldify through vs-deoldify
- Muxing/Extraction: Force FFmpeg for dts/dts-hd audio when dealing with mp4 containers.
- Subtitle: Subtitle language passthrough handling.
- Input: Support Gray8 input images.
- Preview: Vapoursynth Preview errors, while loading source regarding OutputFPS differences
- Vapoursynth: Script generation failed for 444 and RGB output
- Vapoursynth: ignore script output frame rate when using 'Change Speed'
- filter view: crop only got applied to filtered half not both views, which causes issues on resize and aspect ration changes
- Vapoursynth: ignore 'Compare all' when 'Compare View' is enabled
- ffmpeg: removed unnecessary/wrong ticks around some color spaces in ffmpeg call
- ffmpeg: wrong color space due to height vs width mixup on untagged content
- Video: '2pass 1st pass'-only encoding.
- Mux: mkv muxing on passthrough
- ffmpeg: missing whitespace before '-color_primaries'
- tool: Linux package using wrong fdkaac source
- Ui: double initialization of vsUseGLSLCAS
- Vapoursynth: enable KNLMeansCL related filters again (Linux)
- Vapoursynth: search GLSL folder in filter path
- Avisynth: YUY2 -> YUV422PX for high bit depth input
- Vapoursynth: FillDrops ui fix
- Vapoursynth: DotKill interlaced handling
- Vapoursynth: fix crop&letterbox preview for 422 content
- Video: x264 crash with 'always create stats file'
- ui: svt-av1: wrong ui element spinbox vs combobox
- synth: fixed bug in CustomSynthScriptLoader
- Vapoursynth: QTGMC-DeNoise with FilterQueue
- Vapoursynth: FilterQueue and YAHR and FineDeHalo
- Vapoursynth: vsChromaNR Distance setting
- Vapoursynth: TemporalDeGrain2 loading fftw (Linux)
- Avisynth: (32bit) Spline100&Spline144
- synth: cropPreview handling
- filtering: Deinterlacer none => force scan type overwrite to 'progressive'
- ffmpeg: don't use zscale to set matrix
- Vapoursynth: adjust, so that progressive 4:2:2 does allow uneven resolutions
- Vapoursynth: added LevelsLumaRangeSignaling to vsSmooth and vsLimiter
- mux: MP4Box can handle eac3 nowadays -> not forcing ffmpeg for muxing
- linux: ~/.config/hybrid as folder-path to search for misc.ini
- Vapoursynth: disabled anything related to KNLMeansCL and vs-placebo (i.e. GLSL) (Linux)
- torch: CodeFormer supports background resize
- mux: always set mkv ColorSignaling option
- subtitle: 'cut by chapter/time'-option *experimental*
- Video: svt-av1 custom addition
- Vapoursynth: Letterbox not working
- Synth: TIVTC frame rate/count calculation
- Vapoursynth: sRestore default 25fps when frate not set
- Vapoursynth: merge&masked filtering at the same time
- Analyse: dts-hd detection
- Torch: remove DDColor when not installed.
- Audio: update audioQueue
- Vapoursynth: frame props checks
- Video: do not use file cache while during job processing svt-av1 progress
- Jobs: delaycut on reencode needs output name update to avvoid confllicts
- Vapoursynth: QTGMCFilter useEZDenoise UI
- Tags: 'und' language handling
- Torch: RIFE v4.14 support
- Audio: do not add 'downsampleTrueHDtoAC3' when input is an .mkv file
- Container: mkv header compression handling
- Torch: support other network types than ESRGAN by name in VSGAN
- Audio: add option to set 'default=true' in AudioQueue
- Container: mp4 subtitle tagging; set empty title to empty string
- Video: adjusted svtav1 defaults
- Container: add warning for avi and interlace; stream vs container tag mismatch due to ffmpeg
- Vapoursynth: vsTDecimateFilter
- Automation: 'und' language handling
- Vapoursynth: Always set Primaries&Transfer info
- Vapoursynth: Mpeg2Source version problem
- Vapoursynth: activationAttributnameFilter-ErrorPopUps
- torch: SAFA mod restriction
- Vapoursynth: AutoWhite no RGBH
- Linux version is back (thx protvis74)
- UI: multi-selection-comboboxes signal handling
- Vapoursynth: fixed apply-range
- UI: missing 'SpeedChange'-tab
- mlrt: supporting SAFA in vs-mlrt
- mlrt: RIFE fraction support
- mlrt: add tile_size to VSMLRT
- Video: SVT-AV1 progress indication
- Vapoursynth: added vsDestripe to ApplyOnlyTo, Only on region, Merge
- Vapoursynth: revert to old vsDeSpot
- UI: rewrote cropView
- Subs: subtile sorting in SubtitleQueue
- Mux: tsMuxeR job optimization fixed
- Vapoursynth: fixed vsTemporalDegrain2 with FilterQueue
- Vapoursynth: vsQTGMCFilter lossless + masking
- Vapoursynth: resize before resize
- Vapoursynth: descale before deinterlacing
- Vapoursynth: YUV420PH und YUV444PH handling
- Vapoursynth: vsGradFun,vsFlash3DB supported color spaces
- NVEncC: weightP is only available when no b-frames are used
- NVEnc: MREF boolint mixup
- Mux: mkv subtitle support XX-XX language tags
- Muxt: tag handling with mp4box
- NVEnc: nvenc hardware deinterlacing
- NVEnc: qsvenc hardware deinterlacing
- Mux: sub language handling
- Avisynth: addition handling
- Audio: 24bit audio to flac handling
- Avisynth: GenericScriptFilter path handling fix
- Torch/MLRT: Resizer with interlaced content
- Avisynth: deinterlace RGB handling fixed in compare view
- Vapoursynth: vsRGBAdjust small fixes
- Jobs: adjust chapters and length to cut
- Vapoursynth: soft telecine handling
- Jobs: mkvversion check
- Vapoursynth: ReplaceBlackFrames cpu mode fixed
- Vapoursynth: VIVTC frame rate calculation fixed
- MLRT: vsRIFEmlrt requires mod32
- MLSRT: vs-mlrt + masking issues
- Output: mp4/mkv container par signaling
- Torch: and CodeFormer
- Video: hdr setting for svt hevc
- Vapoursynth: RealCUGAN fix force tile enabling
- Torch: vsDPIR FilterQueue
- Vapoursynth: vsTemporalDegrain2 meBlksz vsTemporalDegrain manual overlap size
- Vapoursynth: gmfss_union with gmfss_fortuna
- Jobs: chapter handling
- Avisynth: 444 downsize
- Video: H.264 check width/height restriction
- small cosmetic changes
- HEVC interlaced handling
- Avisynth: LSFMod, LSF allow YUV420, YUV422, YUV444
- Vapoursynth: RIFE/RIFEmlrt up to 4.12_lite
- vsRorsch: vsTorchRIFE up to 4.11
- Mux: tsMuxer calls
- Vapoursynth: enabled vsKillerSpots advanced
- Jobs: allow thd for mp4 muxing
- Vapoursynth: VSGAN detection
- Vapoursynth: sRestore havsfunc -> core =1, muvsfunc => linear
- Input: MakeMKV interlaced handling
- Vapoursynth: vsVagueDenoise -> vsNeoVagueDenoise
- Video: avc support 6.0-6.1 levels
- Vapoursynth: vsMCTemporalDenois no YUV444PS
- vsmlrt: updated to lates vsmlrt
- UI: switch to Base-tab if something is dragged into Hybrid
- Avisynth: add Original/Filtered subtitle when comparing
- UI: switch to Qt6.6.1 (Windows)
- Vapoursynth: VSGAN: Allow to apply multiple models, one after the other.
- DVD: disable DVD reencoding unless Synth is used, due to a bug in mencoder.
- Vapoursynth: make sure to set scanorder to progressive after deinterlacing/IVTC/ fieldmatching
- Video: allow aomenc lag-in-frames not just during 2pass encoding
- Windows addons to GoogleDrive
- x264: added 'auto color space / bit depth'
- Vapoursynth: stepped resize: added "CAS(sharpness=X), "aWarpSharp2(depth=X)"
- Vapoursynth: vsMotionMask, vsDeScratch, vsRemoveDirtMC, vsReplaceSingle, vsChormNR, vsChormNRcuda,VsFillDuplicateFrames, vsReplaceBlackFrames, vsSoftLight
- Vapoursynth: vsBwdif NNEDI3,edeint-parameters
- Vapoursynth: experimental support for vsBestSourc
- NVEncC: 'auto' for b-frame reference
- NVEncC: ffplayPreview
- FFvHuff: interlaced support
- Filtering: crop&resize stepping control
- Vapoursynth: custom adds 'requiresColorMatrix'
- Mux: subtitle passthrough title/name ffmpeg
- MLRT: DPIRmlrt denoise/deblock
- Filtering: added 'overwrite input frame rate' option
- Video: DirectSynthLoading for NVEnc&QSVEnc
- Vapoursynth: more general version of LimitMask through 'Merge'-option
- Torch: vsGRLIR support
- Vapoursynth: TFMBobQ/N
- Linux support
- Avisynth: mclean not called with default filter order
- Avisynth: SelectRangeEvery
- Vapoursynth: mod requirement handling for some filters
- Vapoursynth: crop with interlaced fields handling
- Vapoursynth: a few issues around masking
- Vapoursynth: restrict Santiag color spaces
- Vapoursynth: (normal) TimeCube call
- Vapoursynth: restrict color spaces for NVEncCL
- Vapoursynth: convert RGBH to RGBS for fmtc
- Vapoursynth: vsPreview handling non-square aspect ratio
- Vapoursynth: loading BilateralGPU filter in vsGradFun
- Synth: letterbox issue where letterbow width/height addition was uneven
- Jobs: typo in job generation for blu-ray input
- Jobs: index file path for 'Create sub-folder ...'
- Video: SVT-AV1 denoise option rennamed
- Video: x264 only add rc-lookahead when mbtree is used
- Video: SVT-AV1 HDR10 signaling
- Video: x265 signaling luma always as limited
- Audio: multi-input raw audio reencode
- Muxing: FFmpeg can't handle ttxt subtitle
- Vapoursynth: missing some needed checks
- Vapoursynth: restrict Santiag color spaces
- Vapoursynth: re-enable RealCUGAN resizer
- Avisynth: use vsDeblockP77 for DeblockPP7
- Tools: set priority through niceness on vsViewer&avsViewer
- Torch: adjust to SwinIR v3, DPIR v3.0.0, vsFeMaSR updated, vsGMFSS_union
- Video: disable NVEncC/QSVEncC 'encoder only' for 'DVD input'
- Vapoursynth: mode vsSpotLess options
- Vapoursynth: support for vsDGDenoise, vsDGSharpen
- Video: NVEncC npp support
- Filtering: overwrite input color matrix and luminance value
- Analysis: mkv attachement type detection
- Video: NVEncC disable psnr/ssim when input is 4:4:4
- Vapoursynth: width&height mixup in SSIMD checks
- Vapoursynth: missing matrix info on separate field handling
- Video: x264: temporalsublayer adjustment
- Video: x265: --sbr mixup
- Video: aomenc: decouple auto-alt-ref and some other options
- Vapoursynth: vsYadifMod, EEDI3 only supports YUVXXXP8
- Jobs: ffmpeg muxing deleted audio stream even if it was an input file
- Jobs: chuncked encoding
- Avisynth: applying Toon, VagueDenoiser, AddGrain, GrainFactory3 during filter order handling
- Synth: fix DG PullDown handling
- Muxing: avi handling
- Vapoursynth: vsFilterQueue fmtconv handling
- Jobs: temp-folder per job handling for qp&stats files.
- Analysis: understand "Mastering display color primaries: BT.709"
- Avisynth: fix filterQueue
- Video: NVencC references gui glitches
- Video: NVEncC: weightedp not added to command line
- Video: NVEncC: remove xxxhq modes
- Video: fix chapter point calculation
- Audio: audio only handling
- Video: SVT-AVI options
- Vapoursynth: Gradfun3d+Preview+Masking
- Vapoursynth: fixed - save Masking&Co in Vapoursynth profiles
- Vapoursynth: FilterQueue + MAsking and onRegionOnlyöo>
- Vapoursynth: Santiang call
- Filtering: AutoCrop adjustment
- Avisynth: fix disabled controls
- Vapoursynth: eedi3m vs eedi3m_opencl (Windows only)
- NVEncC: no profile&level&tier control for AV1, only 4:2:0 supported.
- Qt Updates: Changed to Qt 6.4.2 on Windows and Qt 5.15.3 on Linux
- Vapoursynth: more options for MVToolsFPS
- Video: aomenc cosmetics
- Analysis: scan order check adjusted
- Synth: libavsource: repeat=true handling
- Video: aomenc adjust golden frame max, min values
- Video: NVEncC support Lut interp option
- Avisynth: FFT3DGPU add bitdepth option to force input depth
- Synth: forceFilm through DGDecode, thanks to DG!
- Vapoursynth: updated TemporalDegrain2
- Jobs: additional user prompt when clearing temp folder
- Avisynth: add PreRoll when using DGDecNV
- Video: NVEncC: support aq independent of encoding mode
- NVEncC: disable multiRef when it's not supported
- Jobs: chunking: restrict used filters during scene change detection
- Vapoursynth: vsRealESRGAN, Fusion, num_streams support
- Vaporusynth: vsRetinex: increase sigma max
- Vapoursynth: increase dehalo_alpha and finedehalp rx/ry max values
- Audio: 'Ignore reencode and passthrough if format is ...'-option
- Vapoursynth: support for NeoF3kD
- Vapoursynth: weighted resizing
- Vapoursynth: torchAddon vsSCUNet, vs-femasr, AnimeSR support
- Video: aomenc '--gf-max-pyr-height'-option
- Video: SVT-XXX removed 'Create qp file for chapters', see: https:// forum.doom9.org/showthread.php?p=1981213#post1981213
- Video: cuda nvencu encoder support
- Video: x264 range mixup
- Decode: Mencoder -> FFMpeg pixFormat adjustement
- Avisynth: Custom additions only working for first 50 filters
- Synth: fixed interframe custom string parsing
- Synth: QTGMC match preset selections
- Filtering: crop value reset
- Vapoursynth: some masking related fixes
- Video: svt-av1 bunch of small fixes
- Video: FFV1 interlaced handling
- Vapoursynth: some missing dependencies
- Container: enforce mkvmerge usage when mv tagging is used
- Crop: enforce autoCrop use FFmpeg on mod1 sources
- Video: VPX 2pass finding stats file
- QTGMC multi input handling
- Vapoursynth: masking improvements
- Avisynth: split most of the filter groups into individual filters
- Vapoursynth: updated rife
- allow e-ac3 in m2ts/ts
- Vapoursynth: vsLUTDeRainbow allow YUVX
- Avisynth: sRestore add PreRoll during preview
- Vapoursynth: QTGMC 'ultra fast' use bwdif
- Vapoursynth: don't use FFms2 when prefer libavsource is selected
- Decoding: ffmpeg support hardware accel 'cuda'
- Decoding: ffmpeg support hardware accel 'cuda'
- QSVEncC: AV1 support, hardware only encoding
- NVEncC: AV1 support
- Vapoursynth DeStripe
- Avisynth: BWDIF
- torch: support RealCUGAN
- Vapoursynth: Tonemap (Placebo), RainbowSmooth, ReduceFlicker, StabilizeIT, WNNM
- Container: mkv crop-tags
- Audio: 'auto add (last)'
- Video: kavazaar 16bit encoding support
- Avisynth: SalFPS3
- Model reset required
- Vapoursynth: script creation during script creation
- GUI: save icon/text selection in GlobalDataModel
- GUI: disableIcons from misc.ini
- Analysis: FFmpeg color matrix detection
- Input: make sure fps&frame count in encoders get updated on loading a source
- aomenc: noise settings for 2pass constrained quality
- Vapoursynth: split view 'diff' for RGB content
- Preview: do not use MPlayer for Preview when Avisynth 64bit is used
- Avisynth: profile: all Misc settings should now be saved in the Avisynth-profile
- Avisynth: YUY2 needs to converted to YV16 for output.
- Vapoursynth: mClean handling
- Vapoursynth: fallback downsizer selection
- Vapoursynth: missing PlaceboDebandThreshold
- Vapoursynth: missing AviSource library loading
- Vapoursynth: vsSMDegrain NNedi3 subpixel selection
- Vapoursynth: stepped resizing
- Vapoursynth: fixed vsRIFE missing miscfilters import when sceneChangeDetection was used.
- Vapoursynth: adds mod4 for vsMCTemporalDenoise&avsTTempSmooth
- Vapoursynth: clean up model combis
- Vapoursynth: allow to set ColorMatrix flag when using timeCube
- NVEncC: LevelBitrate mixup
- FFMpeg: added -bsf:v h264_mp4toannexb for H.264 .avi muxing
- UTVideo: use yuv44p for ULRG
- Avisynth: Updated TemporalDegrain2 to 2.4.2
- Vapoursynth: Adjusted to VSGAN 1.6.4
- Avisynth Script input: force FFmpeg autoCrop detection
- Vapoursynth: moved aaf and TemporalDegrain to 'rescued.py'
- Vapoursynth: MCTemporalDenoise nCPU
- Vapoursynth: save misc in profiles
- FFMpeg now using matrix instead of out_color_matrix
- GUI: fullscreen, font size adjustment,...
- FFMpeg: explicitly call YUV->RGB conversion with matrix on PNG creation and PNG encoder call
- Vapoursynth: KillerSpots and RemoveDirt disabled since RemoveDirt is broken for Vapoursynth
- Vapoursynth: '# require colorformat XXX' for custom sections
- Vapoursynth: changed default behaviour regarding loading libraries and added vsLoadLibrariesOnNonWindows to misc.ini on non-Windows OSs
- Vapoursynth: use KNLMeansCL-Wrapper from havsfunc for speedUp on YUV content when all channels are filtered
- Output: allow Hevc for mov container
- Vapoursynth: support filter masking (max and edge mask)
- Vapoursynth: FillDrops, CCD, parameterized GLSResizer
- Vapoursynth: 12bit color handling
- Vapoursynth: parameterized GLSL: adaptive-sharpen, LumaSharpen, ThinLine, A4K Darken
- Vapoursynth: option to limit Libav threads in VapoursynthTab
- Avisynth: support Histogram "RGBLevels", "CMYLevels", "RGBParade"
- Avisynth: use avsInfo/avsInfo64 selection depending on whether Avisynth 32bit or 64bit selection
- NVEncC: -vpp-colorspace lut3d=".." support
- Avisynth: RGBAdjust controls
- Avisynth: FRIM handling
- Vapoursynth: some popups when HINet isn't present
- add chapters to non-mp4 files when muxing with ffmpeg
- Video: some models didn't load the saved defaults
- Video: aoemenc:,2pass fails when custom addition was used
- Vapoursynth: 12bit scaling bug
- Vapoursynth: reset filters + removed use Deinterlace checkbox
- Vapoursynth: HQDN3D parameter fix
- Vapoursynth: handling Vapoursynth input scripts in case they are not further processed
- Vapoursynth: TemporalGrain2 support
- Avisynth: QTGMC doesn't support YUV411
- Analysis/Muxing: handling mkv supporting that a single attachment can have multiple ids.
- Jobs: handling jobs with 99+ subjobs
- Audio: stereo to mono downmix
- Input: Input dvd title minimum length was active even then the option was disabled.
- Extraction: use more quotes when using mplayer for extraction on MacOS and Linux
- Jobs: option to clean temp folder
- Filtering: wrong letterbox values on reload of source
- Vapoursynth: letterbox + telecine handling
- Analysis: filter audio by language before initialization
- Video: ProRes 4444 handling + activate Controls
- Input: freeze on unsupported raw input
- Vapoursynth: DGDecNV deinterlace call for tff
- Audio: handling opus raw audio as Audio Input
- Vapoursynth: sRestore was missing ChangeFPS when 'frate' was set while 'omode' wasn't 6.
- GUI: some small glitches
- Cut: cut end frame rounding
- Video: NVEnc deinterlace
- Video: ffnvenc accidentally removed on Linux systems.
- Model: reset input when reloading defaults on non-empty input
- Audio: pcm input handling
- Avisynth: LSFMod now hdb compatible
- Analysis: TimeCodeGrabber ffmpeg
- Jobs: extrating mov to raw
- Audio: ffmpeg->sox->ffmpeg encoding
- Avisynth: RemoveDirt split typo
- Avisynth: FrameRateConverter, MvToolsFPS
- Vaoursynth: trim + Vapoursynth FilterPreview
- Audio: ac3 dialognorm, audioNormalization
- Muxing: Cineform muxing
- Avisynth: 'Filtering->Avisynth->Denoise' en-/disable not saved in profiles.
- Vapoursynth: forgot adjuster for SRMD
- Vapoursynht: drop alpha channel when using LWLibavSource
- Muxing: remuxing vfr mov to m2ts by ignoring the time codes
- Decoding: vidstab when ffmpeg encoders are used
- Vapoursynth: fixed ResampleHQ call when stepped resize is used
- Audio: audio only audio job creation
- Vapoursynth: vsHDRToSDRDGLight init value
- Video: x265: support old 16bit x265 from 2015 (misc.ini, supportX26516bit=true; Windows only)
- Decode: mplayer/mencode use '-demuxer lavf' not '-demuxer mkv' for webm content.
- Video: encoding type "specific filesize/bitrate (1st pass)" -> "specific filesize/bitrate (2pass - 1st pass)" and "specific filesize/bitrate (2nd pass)" ->"specific filesize/bitrate (2pass - 2nd pass)" to limit confusion
- Video: NVEnc - added '--chroma-qp-offset X'
- Avisynth: TemporalDegrain2 supports 8-16bit YUV
- NVEnc: color range values
- Muxing: mkv mpeg-2 interlaced handling
- Jobs: create sub-folders in temp per job (experimental)
- Vapoursynth: tcanny sigma to 0.5
- Synth: allow to force bit depth when using flash3kdb
- Vapoursynth: FilterOrder cosmetics: a. used filters are bold b. filters can be moved through mouse drag&drop
- Decode: not uisng '-demuxer mkv' but for mkv/webm compatible input (this might cause problems, but we will see)
- Analysis: changed MakeMKV workarounds,...
- Input: add 'iso' to the file extensions to ignore
- Vapoursynth: sRestore min threshold to 1
- Jobs: use json options file for mkvtoolnix
- Jobs: explicitly set LANG and LC_ALL in qprocess environment
- Muxing: allow passthrough ProRes to mkv
- Vapoursynth: allow GLS Resizer&Filter for Mac
- Vapoursynth: updated ReadMPLS filter on Windows, fixed code
- Vapoursynth: "lower resolution before resize" can now be restricted to width/height
- Avisynth: FrFun7 now available for 64bit Avisynth
- Video: support FFV1 set output color space.
- Avisynth: disable HDRAGC for 64bit
- Avisnyth: more Histogram options separateFieldInterlacedHandling
- Vapoursynth: switch to API4
- Analysis: adjust to MediaInfo for HDR transfer detection
- Video: Xvid encraw doesn't have '-i ..' anymore
- Vapoursynth: removed openCL option from vsMCDeGrain since there's no TCannyCL anymore.
- Analysis: removed unnecessary code Analysis if container frame rate more than 20 times the stream frame rate, use stream frame rate. x264 version: convert 0.164.x to version 5000 vp9: restrict cpuUsed to
- Filtering: ffmpeg tonemap added npl-parameter
- Video: ediaaCuda (Windows only)
- Vapoursynth: muvsfunc.SSMI_downscale = SSIMD
- Vapoursynth: DPIR, vsRealESRGAN, BasicVSR++, TorchRIFE, vs-swinir, vs-hinet support (in pytorch addon)
- Avisynth: Spotless
- Vapoursynth: only apply range option
- Vapoursynth: chunked encoding support for 1pass encoding methods (*experimental*)
- Vapoursynth: missing libraries and old scripts in MacOS package
- Vapoursynth: changed sangnom.SangNomMod to sangnom.SangNom calls
- Decode: ffmpeg rgb -> yuv conversion with pc scale
- Subtitle: do not convert subtitles to ttxt when muxing srt to mp4 with ffmpeg
- Vapoursynth: embed sup subtitle
- Avisynth: AutoAdjust only using general parameters when autoBalance was a enabled
- Vapoursynth: ResampleHQ call
- Vapoursynth: crash when fmtconv was used multiple times with 'spline16'
- Avisynth: 64bit ImageSequence handling
- Decode: add swapuv when using eq2 on 422 sources in FFmpeg
- Xvid: encoding progress when using xvid_encraw
- Vapoursynth: meta overwrite evaluation
- Vapoursynth: Santiag h/v
- Vapoursynth: Stab 'mirror'-parameter
- Frontend: fixed font size in some tool-tips
- Analyser: crash on some calculation decimal to fraction combinations
- Vapoursynth: TIVTC + gpu
- Audio: eac3 passthrough to mp4
- Muxing: ffmpeg chapter generation
- Muxing: ffmpeg + avc + parallel subjobs
- Avisynth: don't use lsb with Avisynth+
- Vapoursynth: GLSFilter calls when used with FilterQueue
- Vapoursynth: Filter Queue handling
- x265: adjust --uhd-bd do not remove options
- x265: ultrafast profile
- Audio: fixed 'auto (add all)' accidentally adding an audio track 2 times
- Vapoursynth: Histogram depending on type restrict color space
- Vapoursynth: filter preview crash for SRMD resizer
- Vapoursynth: crash when ToneMap was used on rgb content
- Avisynth: inserting custom code before QTGMC failed.
- Audio: '-ignore_editlist' accidentally used even when handling pipeinput from sox
- Crop: crop value not always properly reset on source change
- Jobs: don't use mkvmerge with flac audio since mkvmerge doesn't support cutting flac fixed ass style overwrite
- Vapoursynth: AddLogo (reenabled EdgeFixer)
- Vapoursynth: set Fades didn't enable (on Linux)
- Decode: ffmpeg -> x264 (use rawvideo)
- Decode: x264 use raw video instead of y4m pipe when not using a script
- Synth: SelectRangeEvery frame count/rate calculation of output
- Filtering: fix rotation flag
- Avisynth: tv/pc luma mapping on import
- Autocrop: fix QSVCEnc detect fix
- Vapoursynth: changed sangnom.SangNom to sangnom.SangNomMod calls in scripts
- Files: sort file names explicitly when collecting them from the OS
- Frontend: AVStats: do not adjust based on selection/cut
- Muxing: adjust chapter&qp file to cut
- Vapoursynth: use 'accurate=1' when using VsFilterMod and high bit depth content. (slower but more accurate)
- Vapoursynth: stepped resize support
- Vapoursynth: FrameRateConverter
- Synth: Hybrid now only auto-refreshes the Vapoursynth/Avisynth preview if "Filtering->Misc->Auto-refresh" is enabled, otherwise refresh needs to be triggered manually
- Synth: F5 refreshes the Avisynth/Vapoursynth preview when 'auto-refresh' is disabled
- Vapoursynth: allow multiple 'Framerate Interpolation'-methods when using 'Filter Queue'
- Tools: remove 32bit qaac support
- Internal: fraction handling
- Synth: by default remove FFmpeg/Mencoder deinterlacers when using AviSynth
- Vapoursynth: adjusted to Waifu2x cnn to r4
- Vapoursynth: dgdecnv use default activated
- Vapoursynth: added option to force a specific chroma location when converting from and to YUV420
- Avisynth: changed script names
- Avisynth: lifing some 8bit restrictions
- adjusting SVT AV1 to removed options
- Video: NVEncC: check that "NVEncC->Only encoder" is used only on supported formats
- Video: x265: hme-range support
- Video: svt-av1 ui glitch when switching encoding typ
- DGDecNV: remove license.txt check of DGDecNV support, since it's free now
- Video: x265 removed signal end of bitstream/videostream
- Analysis: if scantype is interlaced but unknown after interlaced checked, assume tff if inpuHeight > 576
- x264/x265: extend some options from single to double didget fl
- Vapoursynth: debanding through vs-placebo
- Vapoursynth: FrameRateConverter support
- Vapoursynth: Detail-Preserving Image Downscaler (https://github.com/ WolframRhodium/VapourSynth-dpid/)
- Vapoursynth: added support for RIFE (https://github.com/ HomeOfVapourSynthEvolution/VapourSynth-RIFE-ncnn-Vulkan) (Windows only atm.)
- Vapoursynth: support for VSGAN through an 'addon' (Windows only), download only by request since it's huge
- Vapoursynth: SpotLess from G41Fun
- Vapoursynth: support for SmoothLevels from havsfunc
- Vapoursynth: TIVTC from https://github.com/dubhater/vapoursynth-tivtc
- Vapoursynth: added 'Flip vertical' to Santiag
- Jobs: vpx version check
- Avisynth: IVTC - TFM add additional options
- Vapoursynth: fixed QTGMC bob
- Jobs: batch job creation
- Synth: remove fulldepth parameter from DGSource
- Output: mkv HDR tagging
- Tools: mp4box version check
- NVEncC: crop&co
- Avisynth: FrameRateConverter: don't add Num/DeNum when double is used
- Output: generate output name: add cut start&end frame info
- Vapoursynth: removed vsAnime4KLevel
- x264 'aud' GUI option not connected to model
- Vapoursynth FilterPreview crash with Letterboxing
- aomenc: fixed do not use adaptive quantization with lossless
- Filtering: yadif - custom: field order ignored
- fixed double calculation deinterlace/ivtc
- x264: gui falsely indicated 'me=uhm' for preset 'slow' even when 'me=hex' was used.
- Vapoursynth: try shortening file names for VSFilterMod (Windows only)
- UI: dependencies adjustment when max value changed
- x264: initial qt_max value.
- aomenc: gui glitch
- rav1e: 2pass crash
- NVEnc: progress indication
- Audio: problem with audio cut
- Vapoursynth: script profile saving missing some filters.
- Input: fixed image sequence pattern detection (bug cause by switch to qt6)
- UI: removed deinterlacer 'none', since it was just decorational
- Vapoursynth: label Vapoursynth preview in 'Filter-' and 'Filter-Split'- view
- Avisynth: CCD added ccdMT option
- Avisynth: AssRenderer set matrix
- Avisynth: Blur selection fixed cosmetics
- Vapoursynth: mClean: use vcm instead of vcmod
- Analysis: interpret 0.0000 as PAR as 1
- Vapoursynth: "Always use Vapoursynth" to tell Hybrid to use Vapoursynth even when it's not needed
- Vapoursynth: Filter-Queue
- Vapoursynth: DetailSharpen
- Vapoursynth: 'Apply Only to' + 'Every'
- Avisynth: CAS, vsMSharpen
- Decode: ffmpeg vsync option
- x265: support --(no-)eos/b
- NVEncC: support warpsharp
- Vapoursynth: libneo-fft3d.so -> libneofft3d.so
- Vapoursynth: DaaMod fix 'no field vsDaaExpMod'
- Sytnh: DVD handling Avisynth/Vapoursynth
- Synth: Remove Trim from FilterOrder, always trim directly after source filter.
- Avisynth: 64bit use MPEG2Dec_64
- Decode: deinterlacing through FFmpeg wasn't used when Avisynth/ Vapoursynth was used.
- Avisynth: custom before 'End'-section was missing
- UI: (e)ac3 dialog normalization ui glitch
- Vapoursynth: IVTCCustomDeinterlacerGPU ui glitch
- Subtitle: subtitle extraction form MP4 files
- Preview: title left/right mixup
- x265: strictCBR handling
- Vapousynth: MClean
- Vapoursynth: Denois filters on their own were ignored
- Audio: qaac language passthrough
- Audio: ffmpeg aac reencode + ffmpeg cut causing audio glitch
- Vapoursynth: VFM color space restriction
- Synth: SelectEvery and SelectRageEvery
- Vaporsyunth: AddGrain
- NVEnc: L1/0 reference min value and gui glitch
- Vapoursynth: make sure filters that change resolution or frame rate are applied to input&output in FilterView.
- Framework: switchted to Qt6 (Mac&Windows only) With this Windows 7&8 are no longer supported,see: Development hosts and targets in Qt 6.0
- Jobs: mplayer try to skip unnecessary muxing for video only encodings.
- AutoCrop crash
- Preview: add '-vf scale' during MPlayer Preview
- UI: bunch of cosmetic changes
- Synth: adjustements adjust to latest DGDecNV DGSource
- Vapoursynth: Anime4k supported color formats
- MPlayer: added 'ni' to mplayer dvd analysis call
- NVEnc: support for --vpp-smooth
- Vapoursynth: GLSL Resizer support
- Vapoursynth: "only apply" from some filters.
- Vapoursynth: support for GrainFactory3
- Video: custom addition support for aomenc and vpx
- Video: constrained quality 2pass VPX/AV1
- Decode: deinterlacing through FFmpeg wasn't used when Avisynth/ Vapoursynth was used.
- Avisynth: custom before 'End'-section was missing
- (e)ac3 dialog normalization ui glitch
- Synth: Avisynth, color matrix seleciton (missing '.')
- x264: min/max quant maximum (missing + 18)
- Synth: Avisynth, 64bit/32bit switching filter path initialization problem
- Synth: Avisynth, small fixes related: RemoveDirt, TFM
- Synth: Avisynth, QTGMC filter call
- Synth: Vapoursynth, fixed SSIQ
- Synth: Vapoursynth, ImageReader always outputs RGB24
- Synth: Vapoursynth, HQDering default, LSFMod gui control
- Synth: Vapoursynth, ff3dFilter extended supported color spaces
- Synth: Vapoursynth, LUTDeCrawl and LUTDeRainbow crashes when 'mask' was used
- Synth: Avisynth, import Zs_RF_Shared for edgecleaner
- Synth: Avisynth, a few bugs related to interlaced handling in Avisynth
- Synth: Avisynth, ColorYUV 'Off' control U/V mixup
- Synth: Avisynth, FastLineDarkenMOD call
- refresh resize&co on manual input PAR change
- Synth: Vapoursynth, typos 'sceneChroma' -> 'scenechroma','internations'->'interrations',...
- Synth: respect filter order when calculating output frame count and frame rate.
- Synth: handle RGB input
- Synth: sRestore support mode -1,-3,-4
- Synth: Avisynth, ColorMatrix change preview
- Synth: av1 aomenc color space restriction
- Synth: error about "overWriteOutputFrameRateValue" when Vapoursynth wasn't present
- Muxing: always used ffmpeg for mkv muxing
- x265: using --scenecut-aware-qp and --masking-strength
instead of --[no-]scenecut-aware-qp, --scenecut-window , --qp- delta-ref and --qp-delta-nonref - x265: support for --vbv-live-multi-pass, --max-vbv-fullness, --min-vbv- fullness
- x265: support for --min-vbv-fullness & --max-vbv-fullness
- Synth: Avisynth, removed 'enableAvisynthForDVD' it's always assumed to be enabled now
- Synth: Vapoursynth, added overwrite Smooth/Super/Vectors to Interframe
- UI: removed simple view for Xvid and x264
- Synth: Reset Avisynth and Vapoursynth filter order when filter count changed.
- Synth: Avisynth´, force use of D2VSource instead of DGDecode when 64bit Avisynth is used (there does not seem to be any working 64bit DGDecode.dll)
- UI: Rearranged the Vapoursynth filters into groups
- Tools: FFMpeg, using '-video_size' instead of '-s'
- Tools: FFMpeg use ignore_editlist for mov/mp4/3gb input
- Synth: Avisynth, limit QTGMC imports
- Synth: enforce Crop
- Synth: Vapoursynth, now also allows interlaced output of scripts
- Video: FFvHuFF set output color space
- Muxing: use '-of avi' instead of '-of lavf' when muxing to .avi using mencoder
- Synth: Vapoursynth, support RGBS in Limiter and Levels
- x265: disabled 'replace tune' in 'minimize command line', since atleast '--tune psnr' has some unknown side effects, see: https://bitbucket.org/multicoreware/x265_git/issues/575/can-someone-clea...
- Output: PNG output, use together with 'raw' as 'container' *experimental*
- Synth: Avisynth: old SpotRemover script by Didée (http://forum.doom9.net/showthread.php?p=1402690#post1402690)
- Synth: VsAutoWhite script
- Vapoursynth: TDeintMod in VIVTC and FixCombed
- Muxing: always used ffmpeg for mkv muxing
- Vapoursynth: add 'Use RGB' for Limiter and Levels and use it as default.
- Vapoursynth: extend compatible TimeCube color spaces by RGBS
- Filtering: "fieldmatch + yadif + deint + decimate2" as IVTC through FFmpeg method.y
- Vapoursynth: support for mClean due to missing TemporalMedian library. (MacOS only)
- Avisynth: handling QTGMC field order
- Video: nvencc version check
- Vapoursynth: Cnr2, typo sceneChroma -> scenechroma
- Video: NVEncC bluray input with 'encoder only' not starting encoding
- Avisynth+: no preRo for Text subittle
- Vapoursynth: sRestore output frame count calculation fixex: Preview not working with crop
- Vapoursynth: handle TimeCude filename changes
- Synth: some colorMatrix fixes
- Avisynth: DFMDeRainbow load mvtools for motion compensation
- Vapoursynth: Fix Combed to IVTC
- Analysis: aspect ratio detection
- Vapoursynth: restrict VFM Mi to blockx*blocky
- Vapoursynth: fixed Santiang typevh typo to typev, "AntiAliasing" - Nedi3aa vs "AnitAliasing - Nedi3aa"
- Vapoursynth: deleting profiles
- Vapoursynth: MAA missing dependecies
- Analysis: prefer stream aspect ratio
- Video: scanorder handling especially for DNxHD
- Tools: tsMuxeR version check
- Cosmetics: Bunch of cosmetic changes
- Video: Using xvid_encraw instead of mencoder for XviD encoding.
- Vapoursynth: using D2VSource instead of MPEG2DecPlus
- Tools: use 64bit of vStripFree, Telxcc and MP4FPSmod (Windows only)
- Synth: added QTGMC custom addition
- Synth: splitting QTGMC into "QTGMC - Deinterlacer" (InputType = 0) and "QTGMC - Filter" (InputType > 0)
- Vapoursynth: Anime4KCPP support for HDNLevel Option
- Vapoursynth/Avisynth: in custom section you can now overwrite width, height, scantype and colorformat using: Note that these values are only respected inside the Vapoursynth/ Avisynth script.
- Vapoursynth: Levels handling
- Avisynth: added QTGMC MatchPreset, MatchPreset2, MatchEnhance
- Crop: lowered min Crop-Width-Mult from 0.75 to 0.7
- Avisynth: TDecimate added additional parameters
- Vapoursynth: VIVTC added Deinterlacer option
- Avisynth: Flash3KDeband adjust output bit depth
- Avisynth: TemporalDegrain requires 8bit input
- Vapoursynth: KNLMeans adjust RGBX
- Vapoursynth: TimeCube RGB handling
- Vapoursynth: restrict filters based on Hqdn3d to 8bit
- Tools: look also for '3D controller" in lspci output for video card
- Analysis: added option to prefer stream luma range
- Video: ProRes models to proxy, lt, standard, hq, 4444, 4444x
- Avisynth: added RemoveDirt
- Output: added 'Config->Output->MKV Contains->Matroska advanced video signaling->Import HDR data from source'
Frame rate and frame count need to be globally overwrite using "Filtering->Misc->Overwrite output". All other values also need to be overwritten globally if you set them.
- Video: Cineform HD support
- Filtering: option to flip video horizontally
- Tools: nvhsp not used on Windows, hardly working on Linux&Mac, sadly ffmpeg does still not support signaling max cll/fall etc
- Tools: not using ffmbc any more
- Avisynth support on MacOS
- Vapoursynth QTGMC bob
- Vapoursynth: saving profiles
- General: restting Defaults caused two instances to open
- Jobs: tsMuxeR temp and input file handling
- Filtering: Removed the "force deinterlace" option, instead 'Overwrite input scan type to' should be used.
- Tools: adjusted to latest NVEncC 'check-features' changes
- Audio: remove unneeded '-ac' in ffmpeg call
- Avisynth: 64bit Support, support 32bit and 64bit Avisynth jobs at the same time in the jobqueue (Windows only)
- Avisynth: limit LSFMod to YV12
- Startup/Shutdown crashes
- Vapoursynth: LGhost
- Vapoursynth: Anime4KCPP when using GPU
- Vapoursynth: limit Santiag Pcsnr when using GPU
- Avisynth: limit SplineResize100/144 to YV12, YUY2, RGB24, RGB32
- Avisynth: FrameRateConverter custom fps grayed out
- Avisynth: interlaced handling
- General: aborting close didn't work
- Communication: send ssl mail
- General: some more cut handling
- Jobs: MPEG-4 ASP workaround
- Jobs: tsMuxeR output file checks
- Tools: BDSup2Sub++ detection
- Video: x264 apply to preset
- Audio: ac3 reencoding
- Video: 2pass vpx/aomenc encoding
- Analysis: mpeg audio layer 1/2/3 detection
- General: gui error/freeze when extration of subtitle wasn't possible
- Avisynth: 'show YUV values' and 'histogram' for YUY2 input
- Jobs: using long IDs
- General: sometimes crashing on start up
- Avisynth: smdegrain limit/limitc double values
- General: always use DebugOutput Level 9
- Container: added matroska extensions: m3kd
- Vapoursynth: replaceed fft3dfilter with neo_fft3d (adjusted QTGMC and MCTemporalDenoise in havsfunc accordingly)
- audio: add option to clear audio queue on processing change
- Vapoursynth: support for SRMD
- Video: rav1e 2pass calls
- Video: x265, minimize command line problem with constant quantizer
- Vapoursynth: interframe + sRestore
- Avisynth: pad to make sure dfttest gets mod16 input
- Vapoursynth: forgot to add Bwdif.dll to th the install (Windows only)
- Muxing: passhtrough huffuyv
- Video: do not add maxCll 0,0
- Analyse: Blu-ray input analysis
- Avisynth: imagesource bug
- Avisynth: ConvertToYUV where colorMatrix was accidentally added
- Video: Xvid 2pass stats file bug
- Jobs: ffindex deleted to early
- Jobs: trying to delete x264 mbtree file evenwhen it should not be there
- Audio: dialog norm make sure that '-dialognorm 0' instead of '-dialognorm -0' is used
- Input: ffmpeg time code extraction
- Analyse: dts-xx detection
- Handling: aid problem avi preview und tokenizing
- Video: x265: separate 2pass passes
- Jobs: progress indication when using qsvencc
- Video: FFMpeg NVEncC, multi-ref was accidentally disabled
- Chapters: switchting within sources with multi input and chapter import
- Jobs: ffmpeg job minimization
- Avisynth: removed SSE(2)Tools
- Avisynth: interplaced preview handling
- Avisynth: moved histrogram control into Hybrid itself
- Avisynth: removed AnimeIVTC since it's not required for QTGMC any more
- Avisynth: switched to Avisynth+ 3.6
- Avisynth: removed PlanarTools
- Avisynth: restrict DeRainbow to 8bit
- Avisynth: during ConvertToXY add ChromaInPlacement when converting from YV12 and ChromaOutPlacement when converting to YV12 in case MPEG-1 or DV Video input is detected.
- Avisynth: allow to enforce ChromaInPlacement/ChromaOutPlacement during ConvertToXY when converting to or from YV12
- Cut: allow to set cut by frame number
- Timecods: the way Hybrid tries to fix time codes
- Preview: force color space conversion on mplayer preview
- Input: added image sequence option to set base fps
- Audio: restrict eac3 bit rates
- Avisynth: extended color support for some filters
- Tools: handling version info with newer tsMuxeR
- XSynth: using trim with cut support
- Vapoursynth: Anime4KCPP resizer (Windows only)
- Vapoursynth: JincResize, DeDot, CAS and adjusted LSFMod to use CAS
- Vapoursynth: added option to lower resolution before resize
- Avisynth: MToon, DFMDeRainbow
- Audio: handling of 8bit pcm
- Video: dynamic HDR with NVEncC
- Audio: ffmpeg ac3 & eac3: dialog normalization
- Video: FFmpeg NVEnc (Windows only)
- Monitoring: some small bugs with the monitoring feature
- Muxing: removed '-r' as input option for ffmbc, since it causes 'Option framerate not found.', works fine with ffmpeg
- Jobs: FFmpeg job optimizer, properly handle extern audio
- Vapoursynth: glitch with Vapoursynth Filter Preview
- Avisynth: Deen mode restictions
- Avisynth: dfttest ui mapping issue
- Muxing: ui crash when video calls didn't generate a video output
- Video: NVEnc: UI init problem regarding HDR selection
- Vapoursynth: fix odd/even selection when not using bob
- Vapoursynth: when using Stab include mvtools
- Synth: output bit depth adjustment on VideoModel bitDepth change for some VideoModels
- Vapoursynth: support for Bwdif deinterlacer
- Muxint: muxing: title&language passthrough during mp4 muxing
- GUI: font size adjustments (misc.ini)
- Video: SVT-AV1 support
- Audio: 'ignore encode and use passthrough if format doesn't change' option
- Synth: added FineDehalo support through Avisynth and Vapoursynth
- Audio: eac3 encoding support
- Filtering: added bwdif for FFmpeg
- Vapoursynth: QTGMC always set TFF according to 'order' even for progressive input
- Video: Support new NVEncC rotate (and transpose) and adjust it to FilterModels rotate option
- Video: NVEncC: aq handling
- Video: NVEncC: supporting '--input-option' for Blu-ray support
- Video: NVencC: support for HDR to SDR
- Avisynth: handling of interlaced filtering
- Avisynth: mftoons now use masktools2 instead of masktools
- Avisynth: add trim according to cut&chapter selection
- Video: x265 using --rskip-edge-threshold and --rskip X
- Vapoursynth: allow Waifu2x scale =1
- Video: support more aomenc options
- Vapoursynth: support for 'Waifu2x NCNN Vulkan' (Windows only)
- Synth: Updated svpflow dlls and adjusted Avisynth Interframe2.avsi
- Vapoursynth: removed support for Waifu2x on Linux since I can't get it to compile
- Video: x265, messed up during 3.3. branch adjustment
- Internals: removed some abandoned code which causes unneeded slow downs after files with lot of meta data were analysed
- video: rav1e 2pass calls
- video: x265, adjusted to 3.3 branch
- Video: QSVEnc encoding mode mapping.
- Vapoursynth: custom script mismapping
- Vapoursynth: SelectRangeEvery and Tweak
- Vapoursynth: Fixed HDR to SDR DG call
- Vapoursynth: HDRToSDR
- Vapoursynth: LWLivavSource use track instead of streamindex
- Video: aomenc - tx64 handling
- Profile: error message regarding 'input' when loading a GlobalDataModel
- Muxing: mp4 video&audio tagging
- Video: NVEnc, arib-std-b67 vs. arib-srd-b67
- Muxing: h264 avi muxing
- Analysis: mediainfo video bitrate indication
- Avisynth: handling high bitdepth content
- Decoder: FFmpeg decoder call
- Avisynth: force LibavSource for AV1 content
- Avisynth: make sure BalanceBorders isn't used when Top/Bottom/Left/Right isn't mod
- Vapoursynth: option to save/load custom script content
- Video: rav1e added "--threads X", "--switch-frame-interval X", "--reservoir-frame-delay X" and "--rdo-lookahead-frames X"
- Video: NVEncC added support for '--psnr', '--ssim'
- check for update
- Synth: removed FFms2k (it's changes were incorporated in ffms2)
- decode: crash when ffmpeg was not compiled with 'zscale'
- analyse: HDR parameter import rounding
- Synth: ignore timecodes for output if FrameInterpolation or Restore is
- cosmectice: AudioTab, AudioInfo on track change
- Synth: ImageSource handling
- video: qsv encoding mode
- tools: manual set tools could cause crashes
- Vapoursynt: Waifu2x limited range compression by using RGBS
- video: vsPipe Problem gefixed
- video: NVEnc only singal VUI in case VUI Signaling is enabled
- audio: handling of multiple trueHD streams with ffmpeg
- jobs: mkvmerge muxing timecodes parallel processing
- video: x265 support histogram scence change detection
- audio: dts-es muxing
- Synth: allow to set LibWAV HW decoding preference
- Vapoursynth: allow Waifu2X even when resize resolution is the same as the crop resolution.
- Vapoursynth: added support for EdgeFixer
- Synth: 'SelectRangeEvery' for Avisynth and Vapoursynth (video only!)
- video: x265 make sure 'fixed quantizer' zones use integer
- muxing: Hybrid doesn't send 'und' to MP4Box but empty language strings
- muxing: option to overwrite not only container but additionally stream aspect ratio
- muxing: ffmpeg indicating vfr even when video is cfr
- video: x265 HDR-10+ signaling
- video: maxCLL typo related to STV-HEVC encoding (can't be used there anyways so more a cosmetic fix)
- video: NVEncC multi level typo bug
- Avisynth: crop not working with custom resizer
- muxing: mp4 language passthrough
- gui: VIDEOHANDLING problem on Linux
- profiles: Do not allow to load Global Profiles while a source is loaded.
- Vapoursynth: Make sure that after QTGMC the clip is preceived as frame based.
- video: NVEncC allow L0 and L1 references at the same time
- video: x265 added support for 'scenecut-aware-qp' with 'scenecut-window' and 'max-qp-delta'
- VideoModel: loading a preset overwrote the resolution&c
- Vapoursynth: SMDeGrain Ui glitch
- Vapoursynth: KNLMeansCL, color adjustment for cmode
- Vapoursynth: LWLibavSource: don't add prefer_hw for AVC with high bit depth
- Vapoursynth: CTMF dependency missing for TemporalDegrain depending of Input and/or settings
- Analyse: Always using '--File_TestContinuousFileNames=0' with MediaInfo.
- Avisynth: adjust interlaced crop handling
- NVEncC: adjusted progress indication
- Subtitle: Teletext handling
- muxing: explicilty set empty 'name'-tags when using MP4box to avoid a bug in MediaInfo
- Video: NVEncC support for --multiref-l0/--multiref-l1
- Video: adjusting To Kvazaar updates
- Vapoursynth: FilterView 'difference'-mode
- Video: support SVT-HEVC
- Jobs: d2v Indexer output detection
- x265: removed '--no-intra-refresh'
- Input: ffmpeg direct time code extraction
- Jobs: x265, don't create .cutree-deletion job when '--no-cutree' is used.
- Jobs: 'MPEG-4 ASP + mkv stretch'-handling on passthrough
- FilterPreview: with interlaced content, that doesn't get deinterlaced while 'No Avisynth during Preview' is disabled
- Vapoursynth: make vsFilterMod optional (Windows only)
- Vapoursynth: handle chapter selection
- x265: support selective SAO
- Preview: mplayer preview + crop force refresh
- Removed old compatibility code for old platforms (XP/Vista/SnowLeopard/...)
- Input: small stuff, disable stretch detection (since it only works for video atm.)
- Vapoursynth: Cnr2, TemporalDegrain filter
- Synth: support 'prefer HW decoding' for LWLibAvSource
- jobs: removed unneeded copy call during subtitle speed-change
- Avisynth: FrameRateConverter
- Analysis: adjusted to MediaInfo reporting 'TrueHD / AC-3' streams as just 'AC-3'
- Analysis: chapter info parsing from mediainfo
- video: some ffmpeg nvenc options
- subs: automatic extraction of PGS subtitles from transport streams
- Vapoursynth: waifux dependency loading
- jobs: mkvmerge call input detection checks
- muxing: tsMuxer call
- analysis: raw audio handling
- jobs: Avisynth/Vapoursynth: DGIndexNV log cleanup
- analysis: AutoCrop for Blu-ray/mpls input
- muxing: force 1:1 signaling in case input and output PAR differ
- Avisynth: Preview refresh problem
- video: NvEncLogicService errors/crash
- video: support adaptive quantization nvenc / ffnvenc
- Vapoursynth: adjusted to lates DFTTest changes
- jobs: process priority only on Windows systems
- analysis: ffmpeg direct timecode extraction
- Vapoursynth: used sub.TextFile for .srt subtitles (VsFilter is Windows only :/)
- Vapoursynth: adjusted to HDR10ToSDRDG 1.12
- Analysis: if time code count and indicated frame count differ more than 1000 frames use time code count as frame count
- Global: don't check for avsviewer when no Avisynth is detected, don't check for VSPIPE or VSViewer, when Vapoursynth isn't detected
- video: adjusted to x265 3.1, rewrote x265-"minimize command line"
- Preview: report Avisynth and Vapoursynth Errors not through popups, but through an entry into the log
- gui: option to 'ask for confirmation' in multiple places
- gui: optional warnings when deleting/resetting/... stuff
- jobs: auto save after adding jobs option
- video: support for const quality in ffmpeg (nvenc)
- video: support for NVEncCs 'constant quality'-mode
- video: x265, support for adaptive quantization mode 4
- video: x265, support hierarchical motion estimation (--hme/--hme-search)
- video: nvenc, support --dhdr10-info, allow aq-strength for H.265, --nonrefp, i/b adapt
- jobs: 'ignore crashed'-option
- Vapoursynth: vs subtitle blend option
- Vapoursynth: 'custom font path'-option
- audio: support for libvo (since ffmpeg dropped support for it back in 2016)
- NVEnc: fixed init bug
- Vapoursynth: embedding idx/sub and sup subtitles
- Filtering: crop only bug
- Xvid: decimal/fraction in mencoder
- Files: Do not allow semicolon or other separator used by Hybrid inside input and output file names.
- Mp4Box: mp4box vfr handling
- Avisynth: HDRAGC min grain option
- Avisynth: Flash3K Deband defaults
- NVEnc: allow aq-strength for H.265
- NVEnc: rearranges layout
- Decoder: prefer ffmpeg as decoder for > 8Bit output
- FFNvEnc: tier-support added missing level 51
- QSVEnc: fixed --weightp support
- x265: adjusted to 'committed 4583000' "Changed the params max-merge to 3, b-intra enabled, limit-ref and early-skip enabled for improved performance for high res"
- Vapoursynth: replaced 'knwvsfunc.py' with 'G41Fun.py'
- NVEnc: support --dhdr10-info, --nonrefp, --no-i-adapt, --no-b-adapt, --direct, --adapt-transform, --weightp, --strict-gop
- Tags: option to set copyright info
- jobs: unwarrented warning about 'You are creating a job without audio, while the input has audio!' during batch processing
- ffmpeg: tonemap sd range missing
- Avisynth: amDCT Prefetch missing
- Muxing: Mp4Box + chapters + Parallel subjob processing
- NVEnc: 'Parallel subjob processing' + keyfile caused crash
- Vapoursynth: LSFMod options matching code (missed version)
- Avisynth: NNEDI3Resize missing prescreen mode 0
- x26X: parallel subjob processing .mbtree-system cleanup triggered too early
- Muxing: MP4Box 'flattening'-call handling
- jobs: Subjobs that took longer to delete
- ffnvenc: bsf written
- Vapoursynth: rotation handling
- VP9: color space grayed initially out
- NVEnc: file size calculation adjustment
- Subtitle: subtitle order mixup
- filtering: 'Force 4:4:4 downsize' with 'no XSynth'
- Avisynth: LSMASHVideoSource + hight bit depth source
- Vaporoursynth: MCDegrainSharp, libmvtools dependency
- jobs: show fps when mencoder is used
- muxing: cosmetic glitch caused ffmpeg for ts muxing to be disabled
- jobs: mencoder getting stuck on mencoder job
- jobs: mencoder progress indication during Xvid encoding
- jobs: Abort subjob processing if another subjob is aborted/postponed/stopped/...
- Vapoursynth: default filter order (rotation before resize)
- Avisynth: use Prefetch() with "cpu count / 2" instead of "cpu count" when MT-Threads is set to 0
- mencoder: use fractions when specifiying ofps
- muxing: added 'insertSEI, contSPS' to tsMuxeR muxing call
- filtering: 'rotate' 'auto' option
- Avisynth: MvToolsFPSmod
- Vapoursynth: added TimeCube to apply LUTs for Color Correction
- Avisynth: MCDegrainSharp
- Avisynth: loading FFms2k
- input: MakeMKV input handling
- Avisynth: updated extension version,..
- jobs: enforce negative audio delay fixing with ffmpeg for mov output
- jobs: enforce cfr decoding for mov output
- Avisynth: ChannelMixer
- x264: 2pass call
- muxing: input detection in mencoder muxing call
- QSVEnc: typo when using HDR signaling
- avi: container tagging
- Avisynth: ConvertBits, don't use dither (stupid idea, since it's already handled when needed)
- Video: timecode files not created on all video formats
- x265: cu lossless not disabled when it has no effect
- Vaporusynth: mClean call
- QSVEnc: HDR signaling (typo)
- video: timcode handling with delays
- video: support rav1e bitrate&2pass bitrate encoding
- Vapoursynth: nnedi3cl support to nnedi3aa
- Vapoursynth: MLDegrain, MDering, aaf, DaaMod, Tweak, SmoothGrad
- Avisynth: MPEG2DecPlus
- muxing: no explixit PAR (during muxing) signaling when XPS is enabled
- muxing: hevc brand signaling
- Avisynth/Vapoursynth: ffmsindex call for mkv(vp9) content
- Vapoursynth: d2vsource call, accidentally contained 'rff=False' for NTSC sources.
- Jobs: to wav job creation
- Preview: MPlayer not properly closing
- Avisynth: use ConvertBits with full=true for PC scale
- Analysis: ImageSequence try 'Image' and 'Video'
- video: adjusted autoAltRef for vp9 and av1
- x265: rearranged x265->Singaling tab
- Vapoursynth: added OpenCL parameter to SMDeGrain
- lots of internal code changes
- Avisynth: lower threads in Prefetch
- Vapoursynth: DGDecIM support since it's not developed any more and doesn't work with latest drivers.
- subtitle: subtilte only extraction for mkv input
- subtitle: support extraction of dvb_subs as vobsub subtitles when they are inside an mkv container
- video: Xvid 2pass bitrate adjustment
- automation: handling of aborted subtitle extraction
- internal: changed the logging
- decoding: enforce cfr decode on fps scaling
- subs: extract dvb as vobsub subtitles when they are inside an mkv container
- QSVEnc: remember HEVC 10bit support
- Jobs: image sequence job handling
- Jobs: mp4fpsmod input detection
- Jobs: NVEncC input detection
- Vapoursynth: handling 'cfr output'
- decode: enforce cfrDecode on scaleFPS
- jobs: deleting *.sub files
- Vapoursynth: mClean, missing libtemporalmedian dependency
- Subs: use more digits when calculation stretch factor
- Avisynth: selectEvery + Avisynth Filter View
- Avisynth: Preview filter reload
- Jobs: vpx mkv checks
- x265: minimize command line + weightb and preset slower+
- models: error messages about models which weren't created due to hardware/os limitations
- Avisynth: job id wasn't replaced when using dgindex
- jobs: parallel subjob-processing, process subjobs out of order and in parallel if possible
- muxing: use FFmpeg, enforces the use of ffmpeg as muxer, might be useful for bitrate stuffing
- Qt Windows: using Qt 5.12 now for Hybrid
- code: some rearraning, which might speedup the startup when Avisynth is disabled./li>
- models: error messages about models which weren't created due to hardware/os limitations
- jobss: Avisynth, job id wasn't replaced
- analysis: mkv default&forced track detection
- output: mp4 output naming during batch processing
- analysis: mkv default&forced track detection
- video: support rav1e '--keyint'
- Qt Linux: min. version is now Qt 5.5.1
- Analysis: mediainfo dts-hd detection
- Input: Input par not properly reset when 'Input PAR' was manually changed for previous source
- Audio: output created in temp folder in some cases with audio only output
- Video: splitting an mkv with split chapter, deleting of temp file
- Jobs: minimize job description for webm muxing
- Filtering: crash when using ToneMap (No XSynth)
- Video: crash when changing values in 'ffmpeg (NVEnc)'
- Video: AV1, adjusted aomenc bit-depth and color sampling restrictions
- Cosmetics: x265, finer control over qcomp
- Input: disabling crop when loading a new single source and autocrop isn't enabled
- Input: disabling 'convert output par to' when loading a new single source
- Output: support mkv(av1), mp4(av1), mp4(vp9) (requires latest mkvmerge and mp4box)
- Vapoursynth: updated to R45
- Video: NVEncC, trim used with cut (Windows only)
- Video: NVEncC, only add VUI parameters when they are enabled (Windows only)
- GUI: Added warning when drivers seem to be too old to work with NVEncC (Windows only)
- Vapoursynth: HDRToSDR by DG support (Windows only)
- Filtering: FFmpeg deinterlacer
- Output: File name generation using chapter names
- Subtitle: convertion from ass -> txt
- Vapoursynth: Histogram in Preview
- Windows: progress indication after minimize and restore
- Adjusted to QSVEncC 3.09 (Windows only)
- Analysis: subtitle analysis through MediaInfo, due to changes in MediaInfo
- Analysis: ignore audio languages which are not ISO 3166-1 alpha-2/3 conform
- Analysis: handling apcm_adx audio in mpeg container, since MediaInfo reports this wrong atm.
- Avisynth: set output depth explicitly
- General: Close Hybrid on Windows in case it's running with administrator rights.
- General: monitoring and file input.
- Misc: misc.ini got an 'runAsAdmin' option, if you use it don't complain in case Hybrid messes up your system
- Tags: tags clearing on file change.
- Video: Removed NVEnc MB check, since NVEncC doesn't read max MB and doesn't report it anymore (Windows only)
- Filtering: FFmpeg vidstab support
- Vapoursynth: mClean
- Video: NVEnc, key-frames on chapter start option (Windows only)
- Video: QSVEnc HDR signaling support (Windows only)
- Video: AV-1 support through aomenc and rav1e
- Filtering: 'mcdeint' support since it was removed from mencoder/mplayer
- Not releasing any Mac versions for the time being. (I don't have acces to a mac anymore.)
- General: properly detect gpus with 'Mobile' in it's name
- Analysis: Image/Video reporting in MediaInfo for an Image sequence
- Audio: aften ac3 encoding
- Avisynth: Image Sequence + Denoiser + only filter dark
- Vapoursynth: Range conversion by setting the '_ColorRange' beforehand according to 'X' in 'X->Y'
- Avisynth: pc scale handling
- Vapoursynth: set range on resize, full range -> x264/x265
- Audio: fixed dts encoding
- Avisynth: QTGMC Sharpness value
- Avisynth: FrameRateConverter + don't hide defaults
- Vapoursynth: vsCustomAdditions
- Avisynth: custom 'before End', 'defore DeInterlace'
- Vapoursynth: vsDeGrainMedianModeY limit to 5
- Avisynth: using Avisynth+ now
- Tools: adjusted to latest QSVEncC
- Avisynth: removed avsCutSupport button, since avsViewer doesn't support it atm.
- Input: restrict accept button in ImageSequenceDialog
- Avisynth: TUnsharp, SmoothCurve, SmoothTweak(16), SmoothLevels16, SmoothLevels, DeblockPP7, Deblock, ColorBalance, BucketMedian, MedianBlur2
- Avisynth: ColorYUV support which allows LumaRange change
- Vapoursynth: MiniDeen, HQDN3D
- Video: support some of NVEncCs VPP filters
- Video: NVEncC support for 'use encoder only'-option
- Input: ffmpeg hwaccel choice
- Synth: bunch of fixes for Avisynth and Vapoursynth filtering
- Avisynth: custom filter order and additions
- Vapoursynth: always using DeCross
- Vapoursynth: some additional color space limitations added to some filters
- general: code for loading profiles
- ffmpeg: changed 'limited' to 'tv' and 'full' to 'pc'
- Vapoursynth: adjusted AddLogo to handle Logos with uneven resolutions
- x265: --analysis-reuse-level
- Avisynth: SMDEGrain defaults
- qtgmc sharpness
- Avisynth: CustomName fixed for AutoAdjust
- Vapoursynth: DeCross
- Vapoursynth: Histogram for preview
- Filtering: remove logo path in case logo doesn't exist
- Vapoursynth: better handle uneven resolutions and RGB input
- Avisynth preview: RGB content handling
- x265: medium preset minimize
- DivX265 width&height need to be mod8.
- Filtering: only support toneMap and zscale when FFmpeg is compiled with it
- x264: Minimize command line with ' --color-matrix undef' in it.
- Vapoursynth: a bunch of small bugs related to default values
- Vapoursynth: FFT3DFilter Sigma2-4 not working properly
- Avisynth: a bunch of small bugs related to default values
- Tools: Tools not properly kept on 'Reset all', required to start Hybrid two times
- Mac: forgot to rename vsedit to vsViewer
- subitle: Hybrid freezes on ogm subtitle extraction when output already existed
- Vapoursynth: "don't hide defaults"-option
- audio: use FFmpeg for ogm audio extraction
- input: use FFmpeg for ogm subtitle extraction
- Avisynth: minor bugs I don't remember in detail :)
- Avisynth: LSFMod parameters not working due to intererence with Vapoursynth
- x264: pc scale handling
- ffmpeg: yadif call bug
- x265: defaults/presets minimization, adjust to source code for x265 presets not the stuff listed in the documentation
- QSVEnc: targetSizeMode
- Vapoursynth: D2v Witch indexing call on Mac/Linux
- Audio: AudioAnalyzer tsmuxer path
- Subtitle: crash when font name start with whitespace
- filter: support custom letterboxing
- Avisynth: HQDN3D, MSharpen
- Vapoursynth: DeBlockPP7, FFMS2K
- muxing: tsMuxeR not adding audio language to streams
- tools: Handle 'Corporation ***** [GeForce *]'-names
- filter: ffmpeg set zscale rangein and range
- audio: No longer using NamedPipe, raw audio decoding is always done through ffmpeg
- nvenc: added support of NVEncCs 'preset' selection
- x265: added support for '--single-sei', '--max-ausize-factor', '--refine-inter', '--refine-intra', '--dynamic-refine', '--refine-mv'
- input: fixed bug when handling vfr input time codes
- Avisynth: support changing the filter order (Filtering->Avisynth->Misc->Custom Filter Order)
- Avisynth: specifying multiple custom script additions like in Vapoursynth (Filtering->Avisynth->Custom)
- Avisynth: telling Hybrid not to Hybrid defaults (Filtering->Avisynth->Misc->Don't hide defaults)
- Avisynth: Avisynth script as input and FilterView
- Avisynth: wine missing in avsViewer call on non-Windows systems
- Vapoursynth: added more options to addLogo to control whether the alpha should be used and inverted or not.
- Vapoursynth: DAA, added OpenCL device selection
- Vapoursynth: Santiag, added device selection
- Vapoursynth: allow to set openCL device for QTGMC
- Tools: vsedit is now named vsViewer to avoid confusion with the normal Vapoursynth Editor
- x264: cbr signaling
- x265: only use radl with fixed gop size
- Avisynth: fixed TemporalDegrain HQ != 0
- Avisynth: QTGMC 'Very Slow' and 'Placebo'
- Subtitle: srt to ass
- Subtitle: srt overwrite styling
- Exraction: DGIndex extract audio from DVD
- Audio: channel count on custom downmix
- Vapoursynth: fixed d2v indexing call
- Vapoursynth: fixed Preview aspect ratio bug
- Vapoursynth: fixed f3kdb.Deband parameter names
- Filter: tonemap call when using ffmpeg (no Vapoursynth or Avisynth)
- Decode: use ffmpeg32 when converting to UT and filtering with Avisynth
- Jobs: crash when output name contains tool name
- Vapoursynth: support for MCTemporalDenoise
- Vapoursynth: support for PSharpen
- Vapoursynth: support for MCDegrainSharp
- Vapoursynth: support for EdgeCleaner
- Vapoursynth: support for TTempSmooth
- Vapoursynth: support for LSFMod
- Avisynth: support for DeScratch, DeSpot, DeFlicker
- Resize: Allow to crop uneven. Note that this will enforce a conversion to RGB or 4:4:4 which might cause a slow down depending on the rest of the filter chain.
- x265: support for 'extend-gop' and 'gop-lookahead' option
- Vapoursynth: Mac now supports the 'VapourSynth macOS Installer' (https://forum.doom9.org/showthread.php?t=173453). Special thanks to l33tmeatwad for his help!
- Avisynth/Vapoursynth: added 'Denoiser' option to QTGMC
- Vapoursynth: Santiag added more parameters for NNEDI3 and EEDI3
- Vapoursynth: more vsDaa NNedi3-Parameter
- Vapoursynth: disabling cropView when enabling FilterView and vice versa
- Vapoursynth: support DGDecNV deinterlacing and use native Vapoursynth filter mode
- Resize: Increase resolution max to 32768x32768
- NVEncC: not usins nvhsp anymore for HDR patching since NVEncC allows to signal maxcll/maxfall and master display information.
- Changed: 'ColorMatrix' now support Rec.20202
- Avisynth: SMDeGrain add support for prefilter mode 4 which uses KNLMeansCL
- Input: handling of mixed input, now 'mixed'-content will be treated as normal interlaced
- Automation: disabled automatic telecine/interlaced check by default
- Crop: use 'Avisynth' crop style as default
- Jobs: abort when time codes are used and inputFPS != outputFPS
- Vapoursynth: resize + crop preview
- Input: crash when first loading a file and then enabling DVD input
- Avisynth: Preview not working for content with color matrix 'fcc'
- x264: removed unnedded empty cleanUpCall
- Vapoursynth: FastLineDarken, Toon, ResampleHQ, GradFun3, Flash3kDeband
- vpx: adjusted to vpx 1.7
- Vapoursynth: using AssumeFPS to set frame rate on input to handle 'prefer original frame rate'
- Input: FFmpeg GPU decoding make thread limitation optional
- Vapoursynth: missing '"'-around fontDir when handling vapoursynth subtitles
- Avisynth: fixed some small stuff
- Video: small bug in fpsfraction conversion
- audio: option to remove negative delays through ffmpeg (cutting)
- audio: use FFmpeg for AutoCrop when input is transport stream
- x265: typo strctCbr -> strictCbr
- x265: only allow strictCBR when vbv/profile&level is set
- x264: rgb input handling
- Vapoursynth: Hysteria call
- Subtitle: add font
- View: NVEncC progress indication
- Avisynth: support for SuperToon
- Avisynth: high bit depth handling
- Vapoursynth: using vsnedi3 instead of nnedi3 now
- Vapoursynth: support .vpy input
- Vapoursynth: tonemap filter
- Input: support image sequences as input
- Encoder: experimental support for videotoolbox - gpu encoding on mac
- filtering: added experimental support for ffmpegs toneMap, note that Mplayer preview will not work with this, since Mplayer doesn't support toneMap. Better use toneMap through Vapoursynth.
- container: make xps_inband optional for mp4, for Quicktime playback compatibility
- 264: assume unified build starting with r289
- Windows: file locations and installer -> Windows users need to deinstall old versions completely
- crash when loading HDR source with 'Display P3' colormetric, assuming D3D65 and not theatre for the time being
- gui: Windows style problems due to missing dll
- Avisynth: SMDeGrain version mixup
- tooltip: black tooltips on window style change
- SystemTrayIcon not hidden, when not minimized
- Avisynth: SMDegrain, loading LSMod for contrastsharp != 0
- x265: quantizer group minimum 8
- Stupid bug which broke mplayer/mencoder calls handling m2ts&co files./li>
- Vapoursynth: FixTelecinedFades
- Avisynth: Preview got 'scrolling' option, which zooms to 100% and adds scrollbars.
- Vapoursynht: Waifu2x call
- tools: accept both 'yes' and '1' during feature check for NVEncC and QSVEncC
- small problems with filter preview of Avisynth and Vapoursynth
- x265: fixed cuTree cuLossless connection
- preview: ccd avisynth filter preview
- Avisynth: DeNoise/-Block 'before' fixes
- ]analysis: ffmpeg probesize now 200M
- Vapoursynth: in preview use ClipInfo stead of FrameProperties
- mkv: timecodes start differently with mkvmerge 18.0+
- Read MasterDisplay and Max CLL/FALL with MediaInfo copy to NVEncC and x265.
- changed: FFV1 use bitDepth of input
- Vapoursynth: option to change filter category order
- Vapoursynth: added experimental 'HDR10ToSDR' option (https://forum.doom9.org/showthread.php?t=174415)
- Vapoursynth: added BlindDeHalo3
- Vapoursynth: openCl for QTGMC, DAA, Santiang
- Vapoursynth: added SMDegrain
- Avisynth: added BalanceBorders
- Avisynth: added NNEDI3CL to Yadifmod
- Avisynth: added GPU support for NNEDI3 resizing using NNEDI3CL instead of NNEDI3
- Avisynth: added SMDegrain
- Avisynth: Mpeg2Source postprocessing option
- adjusted x265 colormatrix&co name changes
- Avisynth on Linux handling
- fixed progress for ffmpeg encoding
- Vapoursynth: bunch of typos
- general: problem with 'ignore all input time codes'
- audio: dts-hd handling
- bunch of small bugs (I forgot about)
- updated dependencies
- Switching between Avisynth and Vapoursynth should be possible now (Filtering->Support)
- renamed Main- to Base-tab
- lot of code refactoring
- loosend dgdecnv restrictions
- vsedit directly pipes to encoder if possible
- forceCBR tsMuxeR muxing when cbr is used
- Avisynth: FrameRateConverter
- input: workaround for latest MakeMKV changes
- general: minimizing folder path could result in an empty folder
- general: resolution restriction for blu-ray
- Vapoursynth: reset defaults
- Avisynth: reset defaults
- Avisynth: defaults for fft3dgpu, Flash3k
- general: forum link updated to forum.selur.net
- disabled console output
- changing max mpls playlist size from 50GB to 100GB
- log: removed details from log and moved them to the report since I'm annoyed of people posting the log and sending me parts of the log by email. (next escalation step will be to remove the log)
- Vapoursynth: VsSSIQ support
- jobs: Don't generate unneeded Vapoursynth script during job generation
- ffmpegnvenc: glitch when selecting constant quantizer encoding not showing the field to set the quantizer
- Vapoursynth: Interframe 'overwrite Alg.' selection
- Vapoursynth: inital vsCustomStack position
- Vapoursynth: don't show resize for preview in Vapoursynth script view
- Vapoursynth: deinterlacer adjustment selecting DGDecNV even when not present
- Vapoursynth: loading of content with d2vsource (now using rff=False for PAL source)
- QSVEnc: some minor fixes
- Avisynth: Flash3kyuu deband defaults
- Avisynth: Avisynth preview now shows 'distributor()' again
- x265: support for dynamic HDR-10
- Avisynth: ResampleMT support
- Avisynth: support amDCT
- Vapoursynth: MVToolsFPS frame interpolation
- Vapoursynth: using d2vSource and d2vWitch also for H.264 raw/transportstreams
- audio: fix sox custom remix
- x264: cbr handling
- avisynth: using QTGMC with TIVTC/TDeint
- Vapoursynth: DVD input handling
- tools: some problems loading tools
- x265: added support for --limit-sao
- vpx: added support for --row-mt
- Vapoursynth: set frame properties (color matrix/range) for input to make sure they are set
- ui: enable tool tip side bar by default
- ui: only show available deinterlacers
- Vapoursynth: Interframe
- muxing: replace "- with '-symbol in tags
- avisynth: non yv12 handling
- muxing: remuxing with video passthrough
- avisynth: missing GRunT.dll
- x265: adjusted to new slower/very slow presets
- Vapoursynth: set color resizer
- misc.ini: skip nvidia checks with: nonnvidia=true
- Hybrid complaining about missing 'bitrate' and 'targetSizemode' depending on the encoder saved as default 'Video Handling'
- x265: rdrefine was always enabled with rdo >=5
- x265: glitch in 'minimize call'
- general: some glitches with Avisynth/Vapoursynth preview
- general: reset cut settings on disabling
- Vapoursynth: cut + Vapoursynth script
- Vapoursynth: FilterView make sure variable&dualVar have the same color space
- Vapoursynth: using vfrtocfr
- Avisynth: TDeint/TFM with QTGMC support
- FilterView/Split: Adjustment to options
- Vapoursynth: DGDecIM support
- Vapoursynth: sRestore
- Output: .ts as output container
- misc: allow to enforce language and country
- Vapoursynth: Interframe
- audio: vbr stack position on Linux/Mac
- general: removed misc.ini from installer (Windows only)
- vceenc: typo 'vbv-buffsize' -> 'vbv-bufsize' (Windows only)
- Vapoursynth: a bunch of small changes
- filtering: handling of rotate when avisynth/vapoursynth is used
- audio: audio channel count not properly taken into account on source change when downMix was involved
- audio: qaac datarate adjustement
- general: high bit depth input handling
- general: Vapoursynth automatically installed on 64bit systems (Windows only); not enabled by default.
- Vapoursynth: nnedi3-resize, DegrainMedian
- VCEEnc: support for some additional options
- 10bit encoding: don't use 'pixel_format' instead of 'pix_fmt' in ffmpeg since it breaks rawvideo output
- x265: analysis file handling
- audio: wav handling
- x265: supporting --dynamic-rd
- x265: aq-motion allowed without adaptive quantization
- x265: supporting --slices X (for better CPU usage and speed on systems with lots of cpu cores)
- QSVEnc: adjusted to latest version
- NVEnc: adjusted to latest version
- VCEEnc: adjusted to latest version (H.265)
- avisynth: updated some scripts and dlls
- avisynth: high bit depth handling
- audio: mono stream merge option
- gui: scalingMode -1 to 3 to misc.ini options
- NVEnvC: added HDR signaling
- avisynth: prefer avs2yuv
- ffnvenc: switching between H.264&H.265 doesn't switch the profiles (they are stuck at H.265s profiles)
- x265: x265->Main->General Settings->Analysis Refinement and x265->Main->General Settings->QP Refinement require the setting of a analysis file otherwise they will cause a crash
- sox: crash when running multiple sox instances in parallel (seems like sox is trying to create the same temp file, now creating, and later deleting, a separate sub-folder for each sox instance)
- avisynth: removed 'disableDistributor', added 'addDistributor' (script preview still never shows distributor())
- avisynth: changed Hybrid default QTGMC ediThread count from -1 to 2.
- avisynth: nnedi3- and ResizeHQ-resizer call fixed
- x265: optionalhrdSignaling and optionalHrdListSignaling popup removed
- gui: font pixel size scaling via misc.ini
- avisynth: aWarpSharp problem
- VP9: support for --color-space, --min-gf-interval, --max-gf-interval, --gf-cbr-boost
- DivX265: not shown on Linux system
- x265: --[no-]multi-pass-opt-distortion, --[no-]multi-pass-opt-analysis, --[no-]opt-cu-delta-qp, --[no-]ssim-rd, --[no-]aq-motion support
- ffnvenc: exprimental support for nvenc through ffmpeg
- switched to Qt 5.7.1 for Windows 64bit and Mac OS X builds
- a bunch of small bugs
- support for VCEEnc
- adjusted to latest x265 changes
- updated detected NVIDIA cards
- dropped WinXP
- avisynth: srt subtitle styling
- avisynth: dither mod4
- input: ffmpeg timecode extraction
- subtitle: tagging subtitle streams which get converted form sup->idx/sub
- nvenc: ui glitch with cabac
- some unicode file handling
- decoder: mencoder->ffmpeg yuv444 handling
- preview: color handling during filter preview and yuv444 content
- some file size checks during subtitle extraction
- avisynth: filters updated
- prores: interlaced signaling
- cuda: 1060&1080 cards should be supported
- avisynth: support save settings for each filter
- nvenc: set target size (note: this is just an estimation, target size can still differ a lot since nvenc doesn't have 2pass encoding)
- nvenc: support 10bit and lookahead feature
- subtitle: 'add to all' option
- x265: added support for --log2-max-poc-lsb, --discard-sei,--qpmin, --qpm
- dts-hd handling
- muxing: mkv track statistic
- mkvextract call, using absolute path
- x265: adjusted to new presets
- x265: Hybrid Defaults
- avisynth: FRIM support disabled by default
- avsViewer: resizing to avoid distorted image if width isn't mod4
- avisynth: problem with QTGMC and bobbing
- muxing: mkv track statistic
- x265: encoding when using cut option
- x265: high-tier support
- filter: ffmpeg pp filters
- audio: sox filtering
- audio: sox, do not drc & normalize at the same time
- avisynth: nedi resize -> don't use if width isn't mod4
- mkv: video stretch detection
- x265: adjusted to new presets
- general: cpu core count detection
- audio: defautl channel count to 6
- avisynth: don't add deinterlacer when FRIM is used, since it always deinterlaces
- model: a few missing avisynth related variables
- x265: fixed '--allow-non-conformance'
- tools: mencoder had a bug crashing near the end of encoding (Windows)
- x265: y4m raw video mixup
- avisynth: Yadif deinterlacing
- analyse: DVD input aspect ratio
- tools: NamedPipe handling
- audio: qaac handling
- filter: added ffmpeg 'framerate' filter
- decoder: prefer ffmpeg as decoder for aisynth
- audio: enforcing downmixing in some additional cases
- frame: removed some ivtc methods
- audio: mkv audio extraction with more than 10 streams
- audio: qaac call, removed 'raw' parameter
- avisynth: f3kdb - range parameter wasn't set properly
- avisynth: qtgmc - progressive content wasn't handled properly
- avisynth: don't use MPEG2source for mpls files
- decode: ffmpeg - post processing
- x264: small bug when resetting x264 medium profile
- x264: allow negative chroma offsets
- x265: 2pass controls grayed out
- x265: version detection -> 12bit support was disabled
- x265: restrict number of references to 8 by default (http://x265.readthedocs.org/en/latest/cli.html?highlight=references#cmdo...)
- qsvenc: feature detection
- batch: frame rate adjustments not always properly kept
- general: basic support for multi-angle blu-ray content (selection of angle should now be possible, DGDecNV users need to update their DGDecNV version to 2051+)
- x264: 'reset to profile' option for tune
- audio: added additionally HE-AAC v2 stereo enforcement checks
- analysis: mediainfo output is temporary saved to file for language compatibility
- avisynth: switched back to old avisynth MT dll for compatibility and stability
- avisynth: switched yadifmod with yadifmod2
- gui: another ugly workaround for arch linux kde compatibility
- gui: audio when a audio queue entry is clicked on the side bar will show a summary of the main settings
- qsvenc: problem reading the features from latest qsvenv properly (Windows only)
- general: vfr to cfr conversion, as far as it's supported
- timecode: don't set UTF-8 BOM in time code files, for compatibility
- handling: frame rate adjustments not always kept during batch processing
- prefer ffmpeg when output is forced to cfr
- cuda: added support for some additional cards
- general: Windows XP support, hopefully this version works better on XP
- input: better handling of MakeMkv DVDs
- audio: better alac support
- audio: problem witht 'DEFAULT:' inside delaycut call
- audio: wav -> ac3
- subs: sup->idx/sub handling
- cosmetics: audio profiles weren't show sometimes
- input: better handling of MakeMkv DVDs
- cosmetics: Audio Tab got changed a bit
- cosmetics: new Icon thanks to acely.cn
- cosmetics: showing and hiding of cut
- cosmetics: show avisynth script, even if the script isn't needed
- x265: adjusted to new presets
- audio: variable mix-up which caused audio encoding not to work always as it should
- avisynth: HDR AGC range fix (shift U/V min value)
- avisynth: .ffindex didn't get always deleted properly
- avisynth: bifrost call
- audio: qaac 64bit portable support, not removing aac encoding, while ffmpeg is present
- video: x264 level compliance tests more often
- video: x265 '--cu-lossless' applied to often
- video: x265 hrd signaling
- preview: fixed preview with avisynth and mov
- input: force Avisynth for OpenDML and 2GB+ Stream size (due to an outstanding but in mencoder)
- audio: flac channel mapping and encoding problems
- video: Xvid encoding on Linux with avs2yuv
- cosmetics: Audio Tab got changed a bit
- input: ignore subtitles inside .avi files
- jobs: ignore chapter selection and cut, when multiInput is present
- audio: allow 'extract with DGIndex' not only for DVD input
- cosmetics: x265, changed the way light level information is entered
- general: changed to QT 5.5.1 for Windows builds
- video: always signal sar when using x264
- video: file naming during 2pass encoding
- audio: better dts-hd handling on reencode
- video: NVEncC '--vbr2' support
- video: x264 '--[no-]intra-refresh' support
- video: x265 '--[no-]limit-modes' support
- video: x265 '--lookahead-slices' support
- avisynth: 'Force greyscale'-option added to 'Stab'
- general: Windows XP compatibility
- decode: ffmpeg avisynth call
- avisynth: KNLMeans, addGrain and autolevel call
- input: mkv index mixup on some sources
- input: make sure output frame count is reset on loading source
- audio: ffmpeg missing '-stric -2' in aac reencoding call
- utvideo: encoding color space handling
- x264: 2pass mbtree + faster preset bug
- jobs: check that outputWidth&outputHeight are > 48
- cuda: added gtx 950 to supported cuda cards
- audio: some cosmetic changes inside the audio tab
- x265: support to signal VUI master display and light level
- audio: ffmpeg audio extraction
- input: audio detection detecting some streams double
- x264: preset&tune order
- x265: preset&tune order
- x265: adding DYLD_LIBRARY_PATH (Mac only)
- misc: force english speaker (Windows only)
- cosmetics: tab indication inside Xvid and Audio tab
- general: frame rate messup
- avisynth: AVSMeter benchmark call
- cosmetics: rearranged audio tab
- audio: limit faac bit rate to 76kBit/s per channel
- avisynth: knlmeanscl
- prores: interlaced encoding support
- audio: extracting pcm_bluray audio with ffmpeg, buy making sure a conversion to the right pcm format is used
- audio: ffmpeg->qaac, channel dropping due to wrong input format specification
- audio: limit fhgaacenc vbr to 1-5 since 6 doesn't seem to work
- general: limit output precision (e.g. 1.4 did end up as 1.3999999999999 with QT 5.5 sometimes otherwise)
- input: mkv-asp-workaround adjustment
- input: NVEncC 'hevc', removed level&profile setting
- tools: windows build contained mplayer&mencoder build which were missing some libraries (e.g. libdvdread)
- x264/x265: minimize command line
- general: changed to MSVC 2015 as compiler for the Windows builds and compiling under Windows 10
- crop: added 'use FFmpeg'-option to the autocrop options
- avisynth: control over which matrix is used during RGB->YUV conversions
- internal: handling of avisynth through ffmpeg, to handle non Yv12 color spaces
- resize: height/width adjustment in encoder call
- x265: --keyint infinite -> --keyint -1, don't use --keyint 0
- x265: limit rc-lookahead to max 250 instead of just max keyint
- qt: switched to qt5.5 for Windows builds
- avisynth: histogram now honors matrix selection
- audio: aacencoding using non-free ffmpeg with fdk-aac build
- audio: ac3 to pcm using ffmpeg causing warning
- tools: updated avsViewer and Avisynth plugins (rechecked that DGDecNV and DGDecIM are nor included with Hybrid)
- tools: x265 combi rebuild
- mac os x yosmite version didn't come with mediainfo
- switched to combi x265 builds for all supported OSs
- filter: 'noise' filter, for adding noise to video
- tools: adjust to MP4Box revisions 0.5.2 starting with 0 again
- audio: pcm reencoding
- input: handling of dvd aspect ratio for 352x... content
- audio: support for 24bit flac audio encoding (when flac binary is used; not ffmpeg or flaccl)
- qsvencc: support for '--mv-scaling'
- x265: adjusted to changes to 'grain'-preset
- x265: added support for '--limit-refs X'
- x265: added support for '--aq-mode 3'
- x265: removed 12bit and 16bit support and added '--output-depth 8|10' instead
- avisynth: better handling of high bit depth input
- general: wine problem, on non-Windows systems
- input: a few bugs related to folder monitoring
- vp8/9: support for high bit-depth encoding (vp9+complex profile only)
- vp8/9: support for 4:2:2 and 4:4:4 encoding
- audio: normalize audio to XdB via sox
- qsvencc: some small bugs regarding feature detection
- nvencc: quantizer couldn't be set
- nvencc: b-frames weren't enabled for h.265
- audio: dts-hd -> stereo wav
- audio: aften ac3 encoding
- audio: fdkaac, use cbr only encoding.
- avisynth: 'Decomb.dll' wasn't loaded for 'Decomb (Avisynth)'
- avisynth: ffmpegsoure2 wasn't used
- output: avi(fraps) -> avi(fraps) remux problem
- x265: added support for '--qg-size
' - x265: added support for '--qpstep
' - jobs: added 'postpone' as one of the popup selection choices
- jobs: make columns rearrangeable
- avisynth: added 'cropping' to the custom section placing
- autocrop: set min width mult to 75% instead of 88%
- analyse: don't run interlaced analysis on files with
- NVEncC: during vbr mode, --cbr was used
- crop/resize: cosmetics change, crop width/height warning combobox was disabled
- tools: check for nvidia cards before checking for tools and thus avoiding freezes due to NVEncC
- x265: updated to latest presets
- x265: enable pools&threads configuration
- misc: allow setting of '-ao' and disabling '-fps=...' for preview
- input: prefering LibAvSource over FFmpegSource when using avisynth for avi input
- crop/resize: cosmetics change, crop width/height warning combobox was disabled
- nvenc: support for NVEncC from rigaya ([url]http://rigaya34589.blog135.fc2.com/[/url])
- audio: option to extract audio from DVD through DGIndex (this is only meant as a last resort since DGIndex doesn't understand DVD file structures)
- output: option to use ffmpeg instead of MP4Box for muxing
- x265: added support for '--max-tu-size '
- x265: added support for '--min-cu-size '
- x265: removed '--threads X', and added basic support for '--pools XXXX'
- x265: adjust presets to latest changes
- cosmetics: audio speed stretch detection allows times as alternative to decimals now
- cosmetics: moved shortcut overview to Config->Views
- avisynth: autoadjust not using setmtmode 2 for more stability
- cosmetics: separate log window (SHIFT+F11) wasn't updated
- avisynth: fixed batch encoding and 'embed first' subtitle script creation problem
- avisynth: fixed resizer options
- jobs: fixed job loading bug
- input: DVD aid mixup when language is empty.
- Windows users should deinstall Hybrid and delete old jobs before installing the new version
- audio: remembering default bitrate settings
- audio: automatic downmix to 5.1 when encoding to ac3 using ffmpeg and not aften
- x265: strictCBR error during 1pass average bitrate mode
- avisynth: base support for denoiser MDegrain (= MVDegrain for mvtools2)
- avisynth: support for FrFun7 denoiser
- ProRes: advanced ProRes settings when using Kostyas ProRes implementation
- audio: using 64bit qaac on 64bit Systems now (before only a 32bit version was available)
Note that this requires the 64bit Apple Application Support. (Windows only) - x265: adjusted '--psy-rd X' default to 0.3
- x265: added support for --[no-]temporal-layers
- subs: automated subtitle extracation during batch processing
- audio: channel mapping on multi-channel (>2) for ogg&opus
- cosmetic: show Title-tag of input audio/video/subtitle stream as tool-tip for the selection combo-/spinbox
- avisynth: keep screen split on update
- avisynth: 4:1:1 input handling
- profiles: loading of multiple old (pre 2014.01.11.1) profiles in a row
- tools: WinXP compatibility (thanks to the mingw64 team for fixing)
- tools: added some alternative names for some tools for more automated tool detection
- x265: support '--zones ..'
- input: using 0.7.66 and 0.7.72 MediaInfo to analyse content (Mac OS X only)
- avisynth: updated to latest Avisynth MT 2.6 RC1
- linux: djcj made some changes to the ppa, see: [url]http://forum.selur.de/post7809.html#p7809[/url]
- audio: aac audio encoder delay handling
- audio: mono to strereo upmix handling
- mux: negative audio delay got ignored for vfr video content when muxing to mp4
- avisynth: MAA2 call
- input: auto loading audio file(s)
- input: avi(raw rgb video) handling
- input: workaround for 1st chapter infos messed up by MakeMKV
- ui: crash when disabling 'Blu-ray'-Input after Blu-ray was loaded.
- subs: crash during job creation, when sup2idx was enabled
- tools: reverted to MediaInfo 0.7.66 due to [url]http://sourceforge.net/p/mediainfo/bugs/860/[/url] (forgot about the bug, which is why I accidentally updated MediaInfo, sadly it seems like the bug isn't that important since I got no feedback from the developer of MediaInfo so far) (Mac only)
- avisynth: benchmarking through AVSMeter
- avisynth: Denoiser->NLMeansCL2
- avisynth: Color->AutoAdjust
- Windows user notice:
Updating from an older versions doesn't work properly!
A deinstallation of the older version is required! (settings&profiles can be kept)
- avisynth: yadifmod nnedi-field parameter
- cosmetics: some unneeded field when resetting avisynth defaults, caused unwanted popups
- extract: mplayer accidentally deleting audio input
- general: update list of CUDA capable cards
- input: don't ignore subtitles on a DVD which have no language tag (needed for DVDs from DVD recorders)
- avisynth: Avisynth script preview, Avisynth filter preview and Avisynth preview are now all interactively adjusted in regard to
changes in Hybrid. - cosmetics: when audio input length is unknown show current position during encoding in top parent call-field
No progress indication possible with fhgaacenc, since it doesn't provide any (when '--ignorelength' is used).
- avisynth: interactive avisynth script view option (now it's always interactive)
- audio: temp file removal
- input: bug reading the mkvtoolnix version which caused problems handling mkv files properly
- input: ignore pulldown flag for files which are 23.9.. fps (since they are normally soft telecined)
- subs: ignore empty subtitle entries during srt/ass->ttxt conversion
- trans: 'None' wasn't always translated properly
- tags: multi input audio-tag handling
- mux: use ffmbc instead of ffmpeg for .mov muxing if it's present
If other features of ffmbc should be added to Hybrid, please post in the forum. Windows and Mac packages now contain ffmbc. Thanks to houdini for compiling the Mac version! - x265: support for the range extension profiles (Warning: These are not finalized!)
- audio: crash on empty source and audio handling 'passthrough all'
- tags: tagging of audio stream from mutlitple sources
- cosmetics: progress indication when extracting streams with mplayer
- demux: hevc remuxing
- demux: mpeg-2 demuxing with mplayer
- x264: typo --psnr vs. --psrn
- x265: 'minimize command line' did remove '--psnr'
- x265: after 2pass delete .stats.cutree temp file
- x265: fix 'unknown version'-info of the attached binary (Windows only), Thanks to jb_alvarado.
- avisynth: dvd input using DGIndex&DGIndexNV
- cosmetics: crashed jobs weren't shown as CRASHED, they simply stayed in their previous mode
- audio: crash when mplayer + sox + audio encoder were used at the same time (only happend when 'Config->Input->Decoding->Raw with MPlayer' was enabled)
- avisynth: add 'wine' before avs2yuv calls on non-Windows systems
- input: added option to automatically run interlace analysis on 29./59./119. fps content which isn't detected as telecined (on by default)
- vpxenc: support constant quantizer mode
- cosmetics: showing a countdown during shutdown&hibernation notification and set 'always on top'
- qsvenc: adjusted to QSVEncC 1.27 (Windows only)
- x264: rev 2525+ now supports --aq-mode 3 (auto-variance AQ with bias to dark scenes); not on Mac atm. due to lack of up-do-date x264
- x265: splitting noise reduction into intra&inter noise reduction
- input: audio now always gets extracted on DVD input before processing to avoid unwanted peep sounds on some systems
- output: change current output path if default output path gets changed and generate output name is enabled
- audio: qaac bitrate listing
- output: avi muxing using ffmpeg
- decode: avisynth + blu-ray input
- x265: added support for '--ratetol X' and '--tune cbr'
- mp4: 'iTunes compatible' changed, Hybrid will now allow non-aac audio
streams as first audio stream unless 'iTunes compatible old' is enabled.
(older iTunes versions only supported ac-3 audio streams if the first
audio stream was aac audio)
- avisynth: combining avisynth filtering and cropping while deinterlacing through mencoder led to a broken avisynth script
- avisynth: crop-Call
- avisynth: accidentally ColorMatrix was always called which could case a problem with MPEG-2 content
- installer: Advanced 64bit options, since too many users simply enabled them without knowing what they do, also removed 64bit avsInfo and avsViewer (so 64bit Avisynth can't be used with Hybrid); WIndows only
- tools: mix-up with fdkaac(enc) (on some Linux systems)
- avisynth: fixed calling QTGMC-3.32 instead of QTGMC-3.33
- input: lsdvd DVD aspect ratio detection (Mac OS X and Linux only)
- preview: image resize (Mac OS X only)
- input: dvd title shown, not the one being selected on dvd load for some dvds
- x265: adjusted: removed --b-intra from --tune grain
- x265: changed --nr limit to 0-20 (internally value will be multiplied by 100)
- cosmetics: changed splashscreen for Mac OS X
- audio: NeroAacEnc wasn't supported on Windows
- start-up problems on some linux machines
- cosmetics: added splash-screen during start-u
- analysis: redo video analysis with ffmpeg if mediainfo doesn't provide color sampling infos.
- gui: crash on start-up on mac
- audio: crash when no audio was present, but 'add current' was triggered.
- DivX265: support --main10 and --format X introduced with version 1.4
- jobs: lower progress update frequency when mencoder is used
- x265: added support for '--tune grain'
- x265: delete '.stats.cutree'-file after "2pass 2nd pass" job
- avisynth: Avisynth looking for RgTools instead of RemoveGrain
- build: adjustments to Hybrid to work better with Yosmite
- x265: '--[no]-lft' got replaced by '--[no]-deblock=
' - x265: added support for '--[no]-pmode' and '--[no]-pme'
- x265: adjusted presets&co to 1.4+
- avisynth: case-insensitive search on Windows caused Hybrid to falsely assume Avisynth+ as being present, which caused Haybrid to look for RgTools instead of RemoveGrain&Co. :/ (Windows only)
- tools: 'bdsup2sub++' detection problem (now Hybrid manually searches /usr/bin for bdsup2sub++, seems like 'which' didn't like the '++' in the name (Mac&Linux only)
- general: adding a job blocked by development debug output
- *added*
- avisynth: "Interactive script view"-option, when enabled, Hybrid will not disable the GUI while the avisynth preview is enabled. It will also update the view on every change made that influences the script.
*WARNING* This option is 'experimental'! It isn't tested extensively, so use it with case. Especially the fast change of settings, e.g. by using the up/down arrows of an option might cause problems. -> if your run into reproducible problems please tell my how to reproduce the problem and I'll try if I can find a fix for it. - tools: 'Check for new release'-button, when pressed Hybrid will check if there's a newer version of Hybrid available online
or not. - x265: support for '--rd-penalty X'
- *fixed*
- input/jobs: bug during subtitle processing
- avisynth: load "d3dx9_30.dll" when loading FFT3dGPU.dll
- avisynth: change frame rate/count when QTGMCs input type is not zero
- *changed*
- avisynth: support Avisynth+ as alternative to normal Avisynth
- input: always set frame count to the number of time codes, for vfr content
- *added*
- input: vfr timecode extraction through ffmpeg this way Hybrid can extract the time codes of every format that is supported by libav :) (mainly useful for vfr wmv)
- *fixed*
- avisynth: DeGrainMedian-call container 2 times the 'mode'-parameter :/
- avisynth: Levels, only supports named parameter addressing for corning and dither
- avisynth: DeHalo filters didn't get applied
- avisynth: SalFPS3, 'FPS' isn't optional and needs to be set explicitly
- *fixed*
- avisynth: make sure content is 4:2:0 before applying SalFps3
- calc: adjusting bit rate indication when a fixed output file size was selected and the chapter selection got changed
- cosmetics: 'extracting video ...' was shown during Xvid encoding
- filter: don't change frame rate when doing progressive to interlaced conversion (mixed up fields and frames :/)
- prores: profile selection and indication
- x264: --aq-strength wasn't properly minimized
- *added*
- filter: 'force 4:4:4 downsize' option to better preserve chroma information
- avisynth: (direct) edgeLevel and aSharp support
- *changed*
- avisynth: rewrote avisynth filter support to easier support new filters
- cosmetics: always show two internal decimal places for fps and progress, always round bit rate during progress indication
- *fixed*
- subs: subtitle handling when 'all subtitles' was enabled
- x264: limit --rc-lookahead to min(keyint, 250)
- general: default paths didn't get propagated properly
- *fixed*
- qsvcenc: only allow '--bluray' for bitrate with lookahead
- x265: 'Target Mode' wasn't disabled during 'average bitrate (1-pass)' selection
- x265: removed 'frames' parameter since it could cause problems during 2pass encoding
- x265: stats file wasn't configurable
- x265: '1st pass' didn't show encoding dialogue
- x265: enforce '-wpp' when vbv is used
- x265: adjusted 'psy-rdoq' range to 0-10
- x265: enable psy-rdoq for level 4+ (instead of 5+)
- Xvid: entering a bitrate for unrestricted profile wasn't possible
- *changed*
- avisynth: enabled 'No Avisynth during Preview/Cropview' by default, under Config->Internals->Avisynth
- cosmetics: added options to control the progress indication
- general: change max resolution to 16384x16384
- *removed*
- encoder: support for cuda encoder since latest drivers dropped support for nvcuenc (which is the old api), will add a new cuda encoder when I stumble over nvcenc using command line application or I write one myself; for those who still use old nvida drivers I added a misc.ini option to enable cuda support
- avisynth: DGDecNV got removed due to request from the author, see: http://rationalqm.us/board/viewtopic.php?f=12&t=364
It's still supported, but the files that belong to it now have to be manually downloaded and added to the avisynthPlugins-folder for Hybrid to be able to use it. - *added*
- audio: option to not cut external audio
- audio: don't use DGIndex when for audio extraction when chapters are selected
- *fixed*
- audio: using raw external audio and mkv a/v input
- input: wrong avs frame rate detection on decimal frame rates
- cut: mkvmerge cut/split call
- x265: 2pass fast 1st pass
- x264: time codes accidentally got ignored when encoding with x264
- decode: mencoder->ffmpeg->encoder call, removed map-call inside ffmpeg call
- cuda: cq encoding
- *changed*
- subtitle: subtitle tab show grab language from file name in sidebar
- *changed*
- x265: support for '--[no-]slow-firstpass
- *added*
- avisynth: added option to disable Avisynth during normal preview, this way audio and subtitles from the source can be viewed.
- *fixed*
- input: ffmpeg addressing video id and temp file detection
- *removed*
- x265: support for '--[no-]slow-firstpass (not supported by x265 atm.)
- *fixed*
- x264&x265 1pass encoding
- ffmpeg output collection
- *fixed*
- decode: disabling lavthreads didn't set lavthreads to 1
- preview: crop-preview didn't show up properly when avisynth as used as decoder
- input: more flexible parsing then reading the tsMuxeR analyse output
- subs: subtitle language passthrough for subtitles which got extracted by tsMuxeR
- *changed*
- subs: added option to enforce a specifc idx/sub resolution during .sup
- x265: added support for '--psy-rdoq X'
- general: added a few additional tool-tips
- *fixed*
- avisynth: ColorMatrix-call
- tags: tag queue accidentally got cleared partially when clicking on it
- subs: .sup subtitle handling (conversion to .idx/.sub for mp4 muxing)
- subs: manual subtitle extraction
- video: 2pass custom target file size not always properly reloaded from model/profile
- *changed*
- avisynth: disable MT, when it's not needed
- x265: added support for tier/profile/level and 2pass encoding, for the later you need to disable (x265->Misc->Create qp file for chapters and keep level set to 'unrestricted' otherwise it will probably crash, but the x265 developers are working on it)
- *added*
- avisynth: overwrite the used resizer by one from http://avisynth.nl/index.php/Resize, also added NNEDI3 as potential resizer when upscaling
- profile: load&saving global profiles
- profile: resetting single model
- tools: restart on non-windows systems
- cosmetics: progress indication
- defaults: enabling 'auto save defaults' disables the default reset options
- defaults: added question dialog before resetting something
- input: don't use mediainfo for audio format detection for .mpls files unless specifically told to
- *changed*
- avisynth: always use FFVideoSource with ', threads=1' and SetMTMode(2,..)
- avisynth: changing MT-Threads to cpu count*2 threads, when cpu count > 1;
- avisynth: use PreRoll instead of RequestLinear
- cosmetics: default diff popup window restyled
- cosmetics: added scrollbars to avisynth script view window
- DivX265: check that output width&height need to be multiple of 8
- subtitle: when double clicking on an subtitle entry show input file name and whether the subtitle gets embedded or not
- x265: added support for '--ipratio', '--pbratio', '--hrd', '--aud'
- *fixed*
- audio: enforcing audio downmix to 5.1 for 6+ channels when ac3 is selected as output
- avisynth: fixed peachsmoother missing option
- input: crash during tsMuxeR analysis
- output: mkv attachment passthrough problem
- preview: problem with preview on mac
- tools: tool detection on Windows XP; don't check for QSVEnc&fhgaacenc when on Windows XP
- tsMuxeR: don't use 8+3 file names
- DivX265: don't show bitrate and est. size for DivX265 in cq mode
- crop/resize: disabling 'force output par' didn't enable resize again.
- *removed*
- mac: only releasing Mac OS 10.9+ builds (assuming there are no 10.6-8 users since I never got any feedback regarding 10.6-8 for some time now)
- *fixed*
- audio: tsmuxer not compatible audio accidentally fed to tsMuxeR
- avisynth: code page problem when writing avisynth files
- cosmetics: glitch in title progress indication
- decode: ffmpeg crash when colorMatrix from&to are equal
- input: time code extraction of flv files with non-ANSI names
- input: mkv time code handling
- input: hevc stream detection inside mkv container
- tools: problems properly detecting tools
- x265: bug minimizing crf min/max values that are not zero
- *fixed*
- DivX265: progress indication (percentage wasn't shown)
- ui: automatic loading of custom styling)
- *changed*
- tools: tool arrangement under windows, to avoid problems which occurred on systems with missing run-times. Tools are now split over three locations:
- program folder: here are all the static tools
- 'dynamic'-sub-folder: here are all the tools which are only available as a. 32bit and b. dynamically linked
- 'dynamicX'-sub-folder: here are all the tools which are available as 32bit and 64bit versions and dynamically linked
- *Notice*
- general: tool tips not showing
- Windows: it's recommend to uninstall old Hybrid versions (settings do not have to be removed) before installing this or a newer version
- *added*
- DivX265: support new VUI options
- avisynth: indexing mkv(vp9) content with ffvideosource
- ui: font change did not influence queues and separate log window
- ui: fffmpeg progress indication
- job: 'remove all' button not working
- input: don't use '-demuxer mkv' when analysing mkv with a vp9 video stream
- tools: QSVEncC support for Windows XP (requires Windows 7 and newer)
- *fixed*
- general: tool tips not showing
- video: ffvHuff-tab configuration en-/disable
- *fixed*
- preview: fixed preview issue if no avisynth is available on the system
- video: QSVEnc support, adjusting to QSVEnc 1.23, thanks to rigaya for fixing some problems
- ffv1: ffv1 mencoder call
- subtitle: crash on subtitle extraction
- timecode: fixed a crash in time code handling due to formating issues
- audio: extracting&muxing aac to mp4 could trigger a conversion to wav, even when 'passthrough' was selected.
- audio: enabling 'Always extract as wav' and audio handling 'passthrough' interfered
- *added*
- video: initial support for ffvhuff and libutvideo
- decode: added options to support hardware acceleration when ffmpeg is used.
- mux: option to disable mkv statistics per track (introduced with mkvtoolnix 7.0.0)
- *changed*
- general: switched to MSVC++ 2013 for Win 64bit builds
- *fixed*
- audio: extracted audio didn't get deleted after audio reencoding
- *fixed*
- decode: mencode decod ecall containing '-vf ,scale', instead of '-vf scale'
- qsvenc: adjust to feature restriction on system
- *changed*
- avisynth: speed-up FFVideoSource by using setMTMode(5,.. instead of setMTMode(3,..
- *added*
- avisynth: de-'dot crawler': DeCrawl, Checkmate, DeCrow
- *fixed*
- video: video could get accidentally deleted before muxing if x264 1pass bitrate encoding was used.
- installer: Windows: reverted Kvazaar to the official releases, since the currently packed kvazaar versions still don't work for some users
- start: didn't start-up properly on linux&mac when placed to /usr/bin
- *changed*
- video: removed QSVEnc support on Vista since it requires Win7+ (wrote an email to the author, don't know if will react to it)
- audio: sound playback (at end of queue/job) on Windows is now uses native Windows API calls since Vista doesn't support the QtMultimedia library if it is compiled on Windows 7
- global: resetting models or Avisynth settings (with 'initial') will now restart (and not just close) Hybrid
- *fixed*
- video: QSVEnc support
- general: Vista compatibility
- *fixed*
- audio: using audio from different source than the main input
- audio: crash when switching between titles with and without audio
- tools: Windows package contained a kvazaar binary which did cause problems on some systems
- *added*
- video: initial support for QSVCEnc as encoder
- video: initial support for FFV1 as encoder
- *fixed*
- audio: mp4 audio extraction name problem (on Windows)
- avisynth: force deinterlace + Avisynth-Deinterlacer sometimes didn't force deinterlacing
- avisynth: RGBColorAdjust Filter-Preview
- avisynth: ColorMatrix Avisynth/Filter-Preview
- avisynth: bug could cause distributor() to be added, even when 'Disable distributor()' was enabled
- avisynth: reset 'need avisynth'-checks
- avisynth: fixed HQDering call
- decode: mencoder 422 output and color space mixup using mencoder
- DivX265: use constant quantizer '-qp' instead of '--cq'
- filtering: mcdeint -> framestep didn't update the gui
- input: monitoring folder support
- jobs: check whether FRAPS is installed on the system or not
- x265: 12bit encoding
- mux: mp4box didn't always use short file names on Windows which could cause problems with unicode names&paths
- mux: tsMuxeR set disklabel for isos
- *added*
- avisynth: support for aWarpSharp sharpening
- avisynth: tivtc now also allows QTGMC 'slow' and 'Very Slow' as deinterlacer
- avisynth: 'add custom content', allows to add content to Hybrids avisynths scripts;
WARNING: Hybrid does not check/verify the content of the entry, so if you mess up, you are on your own! - Kvazaar: support for RDO quantization
- x265: support for 4:2:2 color space
- x265: support for '--[no-]repeat-headers'
- x265: support for '--psy-rdo X';
- x265: adjusted to new preset&tune values -> It's recommend to reset the x265Model
WARNING: This option is known to produce artifacts in some cases! - *changed*
- avisynth: set MTMode to 5 before LibAVVideoSource
- avisynth: enable "Disable distributor()' for Windows 8 & 8.1, by default, for all others disable it by default
- avisynth: fixed links which linked to avisynth.org
- avisynth: allow distributor() even for avisynth preview
- input: improve mpls handling
- jobs: make sure there will be no job creation if .m4v is used as output extension while 'Audio handling' isn't set to ignore. Added awarning about it and how to avoid it and still create .m4v output.
- DivX265: use DivX265 'resolution profiles' internally and enforce them
- *fixed*
- audio: pcm extraction from avisynth input
- audio: multi-input/batch processing audio processing
- input: make sure tsMuxeR analysis is fed with 8.3 file names on Windows
- cut: fix chapter&cut selection on mplayer dvd audio reencoding
- cut: fix job optimization for ffmpeg cut calls
- cut: keyframe positions display
- general: crash when first a normal file and then a dvd was analysed
- tags: remove pipe-symbol ('|') from tags which will be send to MP4Box, to avoid a crash
- x264: 10bit encoding
- x264: show live bitrate during crf encoding
- xvid: y4m -> xvid encoding.
note: progress indication is not working since mencoder doesn't provide a progress indication when fed through a pipe. - *added*
- avisynth: added support for Peachsmoother and mftoon (not much tested)
- jobs: option to set minFreeSize to start (sub-)job
- cut: option to always use key frames selection
- *changed*
- audio: when using MultiInput (batch processing) only 'Custom' allows to change the audio queue.
- input: check that the 'which' result(s) are indeed files and not folders
- DivX265: adding an additional ffmpeg call to work around DivX265 not beeing able to show progress indication
- preview: limit preview on mac for mpls files when mplayer is too old or not compiled with libbluray
- preview: open the preview inside the same window Hybrid is located (horizontal alignment of monitors assumed)
- profile: re-run auto routines if GlobalProfile or AV-Profiles get loaded and input is not empty
- audio: use DGIndex to extract audio form DVD, if a. avisynth is present, b. input is DVD, c. mplayer reported it can't handle the input audio and d. Hybrid was set to ignore this report
- x265: removed crf and cq from x265 defaults
- *fixed*
- question mark accidentally replaced some of the number constants
- *added*
- avisynth: added TTempSmooth as denoiser
- *changed*
- avisynth: disable distributor() by default
- *fixed*
- audio: stretch handling and audio add options could lead to too many audio queue entries
- audio: opus bitrate selection when aac stack got removed
- filter: disable threaded decoding if gradfun is used on .avi input
- preview: crash for audio only input
- model: "Current defaultTempPath is empty" when 'Generate' and 'Temp path to output path' were enabled.
- mux: audio stream got lost for negative delay + mp4 output
- output: multioutput file naming
- *added*
- DivX265: support for constant quantizer support and additional aq modes
- 'Create iso with tsMuxeR'
- gui: audio/subtitle some keyboard mappings
- x265: support for weightedB
- *removed*
- 'Create image using ImgBurn'
- *notice*
- it's recommend to reset the DivX265 profile
- *changed*
- output: add par info to mp4(hevc); did cause problems with the earliest decoders, which is why it was disabled before
- *fixed*
- avisynth: problem with DGDecNV not being used
- jobs: cosmetics, qaac, x265 progress indication
- audio: delay was sometimes ignored
- x265: color mess when feeding 16bit x265
- x264: enabling 'stitchable' didn't change the call
- *added*
- filter: colorMatrix support through ffmpeg (not only avisynth)
- output: option to use 'Title'-tag value as base-name for name generation
- x264: option to enforce .stats creation
- *removed*
- filter: 'Selection', since it doesn't work with mencoder as decoder (only got it working with ffmpeg or avisynth)
- x265: x265 support is removed when a version newer than 0.8+149 is used on Windows XP machines (x265 doesn't support Windows XP any more unless someone writes a patch for it)
- *changed*
- avisynth: some more mt-mode adjustments
- audio: allow ac3 inside mp4 with 'iTunes compatibility' enabled, if it is not the first audio stream in the output container (Apple TV should support this)
- cosmetics: when toolTip-sidebar is active and an audioQueue-entry is double-clicked, sidebar will show a short summary of the entry
- cosmetics: warn if content with timecodes gets muxed to avi
- input: use libbluray and mplayer for crop-/interlace-detection and preview if mplayer is build with libbluray and it's revision is 36902 or higher
- output: added mkv(hevc) support for mkvtoolnix 6.8.0+
- vp9: support cq encoding
- x264: Hybrids x264 defaults now disable 'Macroblock tree rate control', see: http://forum.selur.de/post5154.html#p5154
- x265: removed '--input-depth 8' from the defaults which get applied when applying a preset
- x265: add '--sar x:y' signaling support
- *fixed*
- avisynth: nediaa*2 call
- input: blu-ray analysis if tsMuxeR is not present
- input: crash when Hybrid was called on a Blu-ray folder which ffmpeg identifies as encrypted
- cosmetics: indicating audio encoding during DivX265 encoding
- cosmetics: audio track selection combobox width
- subs: tsMuxeR + extract all subtitles + skip not working properly
- tags: accidentally added ')' to some audio titles
- jobs: ffmpeg multi-extract optimization
- *added*
- audio: mac version now got fdk-aac for he-aac and he-aac v2 audio encoding
- subs: cosmetics, added 'add font'-button
- selection: avisynth implemented not for ffmpeg/mencoder so far
- output: MP4V as possible FOURCC for .avi output
- *changed*
- kvazaar: '--cqmfile' and '--ref' support
- ui: adjust slider ticks to max possible value
- ui: some cosmetic fixes
- *fixed*
- cut: tsMuxeR cut calls
- input: RealVideo handling
- output: interlaced raw H.264 remuxing problems
- tag: tagging was broken
- ui: AV-Combo Profiles didn't show up in Main-tab after restart
- filter: asynchrony issues accidentally deinterlacing instead of ivtc (if Avisynth was present, but not enabled for DVD input)
- x264: make sure Hybrid feeds 10bit colors to x264-10bit (otherwise a crash occurs if the x264 version wasn't compiled with an additional scaler)
- jobs: ffmpeg extracting multiple streams at once
- *added*
- input: option to decide whether 'dvd://' or 'dvdnav://' is used for mencoder/mplayer
- x264: option to disable the automatic enforcement of medium restrictions for Blu-ray compatible output
- *changed*
- avisynth: use setMTMode(3) before debanding filters
- general: move mac settings folder to ~/Library/Application Support/Hybrid
- input: don't assume .m4v as raw MPEG-4 Video on Mac OS X
- x265: '--scenecut X' and '--min-keyint X' support
- x265: support VBV options
- *added*
- video: Kvazaar (v0.2.4) support
- *fixed*
- analyse: problems with some mkvs created with older MakeMkv versions
- avisynth: accidentally disabled sharpening in the last release
- avisynth: bug in LimtedSharpenFaster call
- avisynth: select preferred text renderer
- avisynth: accidentally disabled sharpening in the last release
- crop: OnLoad->AutoCrop didn't properly enable the gui after finishing
- input: mpeg-2 raw frame count
- input: added workaround for '-nosound dvd://' since current mplayer&mencoder builds are broken
- jobs: cosmetics, fixed some progress indication bugs
- mac: profiles&settings ended up in user home
- x265: missed that '--refresh IDR/CDR' got replaced with '--[no]-open-gop'
- x264: lossless output color space bug
- *fixed*
- avisynth: avisynth script requirement mix-up
- *changed*
- avisynth: use MT mode 5 if TextSub is used with text based subtitle
- decode: use y4m for vpxenc when ffmpeg is used as decoder
- output: support HEVC inside m2ts if tsMuxeR 2.5.5+ is present
- tools: instead of using '-i bluray:' now using '-buildconf' too check if ffmpeg was build with libbluray&co
- x265: 'bPyramid' now is a bool value
- *added*
- avisynth: misc.ini option to set an alternative avisynth plugins folder
- x265: support '--aq-mode 2' (= auto)
- x265: support for '--[no-]cutree'
- *fixed*
- analyse: lsdvd not adjusted to absolute path
- avisynth: Logo call
- avisynth: some preview bugs
- avisynth: SupTile filter detection
- avisynth: some path detection bugs related to Linux&wine
- avisynth: option to disable 'distributor()' usage
- cosmetics: x265 crf spinbox
- cut: key frame based cutting
- cut: speed up cutting with ffmpeg by using two '-ss' option
- internal: changes on multiCheckBoxDropDown got ignored (fixes multiple bugs introduced by previous refactoring)
- jobs: subtitle type of embedded subtitles didn't get ignored when checking blu-ray compatibility
- muxing: during m2ts muxing, video got lost
- subtitle: extraction call, didn't always properly convert relative to absolute paths
- tools: tool version cache read problem
- tools: mkvmerge version wasn't sometimes detected properly
- vp9: added workaround to always feed vpxenc with y4m content; which according to it's documentation isn't supported, but instead of i420 and Yv12 which should work, it does work; should be fixed in latest vp9, but I leave the workaround
- vp9: lossless encoding
- *fixed*
- 'true' used instead of the home folder location (damn pointer ;))
- *fixed*
- input: crash during audio only processing
- decode: subtitle embedding call
- *changed*
- DivX265: adjusted to latest version
- *fixed*
- x265: white-space problem with rdo naming :/
- *fixed*
- x265: high bit depth handling
- *changed*
- x265: adjusted to latest changes
- *changed*
- vpx: reverted to an older vpx version since current git messes up the color spaces
- x265: adjusted to latest preset/default changes
- input: adjust stream length to container length if the indicated stream length is less then half of the container length
- *added*
- x265: 'custom command line addition'
- vpx: support for VP8/VP9: '--tune', VP9: '--frame-parallel' and '--aq-mode'
- *fixed*
- chapter: problem where chapter and input length collided
- chapter: accidentally (nearly) clearing the chapter queue when an entry was clicked on
- input: crash due problem with broken subtitle info
- mux: MP4Box output file check failed for split/flat/hinting calls
- subs: typo in one of the subcode names
- subs: automatic loading of external subtitles if source has non and passthrough subtitles is enabled
- build: Mac OS X Info.plist generation
- *removed*
- vpx: restricted profile and basic speed control, since some options simply don't work
- *Note*
- Mac OS X: current release is still using old mencoder/mplayer combination so they don't support H.265 content as input.
(No clue if I ever get mencoder&mplayer compiled with libbluray, libass,...) - Mac OS X: x265 is only contained as a 8bit version (so high bit depth encodes will fail), since current x265 doesn't compile with high depth enabled. Reported the problem to the developer mailing
- *fixed*
- model: GlobalModel occidentally saved 'mplayerHasLibBluray' which could lead to problems with Blu-ray input
- analyse: .mpls were analysed with mplayer
- avisynth: tweak call
- input: .y4m support
- autocrop: didn't properly adjust to relative mplayer path
- mac: Info.plist file
- chapter: import/export
- tools: grab ffmpeg built date (caused problems with ProRes encoding)
- *changed*
- jobs: adjusted to latest tsMuxeR 2.x, sadly not available for Mac OS X 10.6.8
- avisynth: added 'distributor()' back
- a lot of refactoring
- avisynth: changed from normal ffmpegsource plugin to c-plugin
- tools: updated cuda capable card listing
- calc: trueHD overhead calculation
- *added*
- avisynth: RawSource for y4m input
- muxing: option to specify MP4 interleave value
- x265: inital x265 encoding support; sadly the Mac OS X package doesn't include x265 since it doesn't build on Mac OS X 10.6.8
- *fixed*
- audio: audio source selection didn't get enabled for multi-source input
- cosmetics: when no audio and video streams were found inside the input, the UI didn't get re-enabled.
- jobs: jobs checks, didn't properly identify the MP4Version string if it ended it a character instead of a number
- *changed*
- cosmetics: tool-ip side bar, now will shop the tool-tips even if 'show tooltips' is disabled
- mac: added version info to Info.plist for mac
- container: support VP9 inside webm if mkvmerge version >= 6.5.0
- *added*
- ProRes: options to load/save/delete profiles
- *fixed*
- avisynth: ColorMatrix call
- decode: mencoder handling of X to i420 color space conversion
- gui: problem with local.conf not properly read
- *changed*
- installer: delete license.txt if it contains one of my keys (*thanks to Faust*)
- *fixed*
- audio: aac codec switch reseted bitrate to 192
- audio: don't use mencoder for aac encoding on windows (windows mencoder doesn't come with faac by default any more)
- audio: sox calls were missing '--ignore-length'
- filter: missing ':' in ffmpeg + unsharpen call
- installer: seems like the problems with non-latin1 user names are finally fixed :D
- jobs: job optimization falsely combined calls on raw streams
- *added*
- audio: alac encoding through ffmpeg
- *fixed*
- audio: downMix mixup when encoding the same multichannel audio stream first to mp3 then to (in example) ac3
- audio: faac encoding, with external faac
- audio: additional 96kHz fixes
- gui: installed and Hybrid regarding UTF-16 names and paths
- vp9 not beeing recognized
- *cosmetics*
- jobs: add wav output size for wav raw output to log
- *fixed*
- audio: downMix mixup when encoding the same multichannel audio stream first to mp3 then to (in example) ac3
- audio: faac encoding, with extrenal faac
- audio: limiting ogg and mp3 audio bit rates
- avisynth: deathray settings
- gui: avisynth integration didn't show the Avisynth Preview
- *added*
- audio: support for external fdkaac audio encoder; before fdkaac was only supported if it was compiled into ffmpeg
- *changed*
- paths: try to keep all path relative as long as possible to allow better portability (got lost when tools caching was added)
- audio: added default bit rates for the audio encoders
- *cosmetics*
- jobs: pcm big endian only supported for raw output, since no container supports it
- *fixed*
- audio: handling of 96kHz dts audio
- batch: audio mapping mix-up during batch processing
- general: Hybrid crash some times, when a job crashed
- mux: remuxing of hevc content between .mp4 and .mkv
- x264: OpenCL support (wasn't cached properly)
- *added*
- audio: support for external fdkaac audio encoder; before fdkaac was only supported if it was compiled into ffmpeg
- x264: support for '--aq-mode 3' and '--fade-compensation' if the used x264 supports it
- *changed*
- input: ignore "application/octet-stream" mkv attachments
- internal: prefer ffmpeg over mplayer when extraction DV video streams
- tools: exchanged x264 with modded version from Komisar, due to missing OpenCL support in the normal version. (Windows only)
- *removed*
- tools: FLACCL from the Windows package, reason.
- *fixed*
- input: scanning for stretch in mkv caused Hybrid to show each stream two times
- general: some problems with non-latin1 paths (not sure if I caught all)
- profiles: loading&saving of global profiles
- tools: mixed up the 64bit and 32bit ffmpeg versions, which caused problems on Win32
- *added*
- avisynth: Deathray (a new avisynth extension is needed)
- *changed*
- tools: added FLACCL to the Windows package (opencl flac encoding, requires .Net 4.x to be installed)
- jobs: removed an unneeded CleanUp call which sometimes was added, but didn't remove anything
- *cosmetics*
- jobs: added an info that either mkvtoolnix 6.5+ or Rovis mkvtoolnix version is needed for hevc inside mkv
- *fixed*
- system: could accidently delete the content of ~/local/share due to a home folder mess-up
- *fixed*
- debug: replaced Hybrid binary with one that doesn't show the debug window
- *added*
- x264: option to limit the number of threads to: 'input height'/40 + 'maximum number of b-frames'
see: detailed explanation here. - *fixed*
- ui: startUp didn't work if some tools were missing
- jobs: .sup subtitle were accidently marked unsupported
- *changed*
- external: updated avisynthExtension to 20131002
- gui: speedUp loading the UI
- muxing: Hybrid will allow Hevc inside mkv if mkvtoolnix from rovi is used (!this version does not come with Hybrid!)
- tools: Hybrid now caches the tool paths and versions, this way only when the Hybrid revision changed will the startUp check tool paths and versions
- *fixed*
- audio: dynamic range compression got ignored sometimes
- audio: extracting dts/ac3 core sometimes didn't delete the dts-hd/true-hd track
- fonts: custom font path handling (font extraction)
- general: shutdown/resume on Linux
- jobs: postpone and continue after restart didn't work as it should
- misc: ignore list wasn't processed properly
- output: mkv attachments weren't extracted
- path: fix problem when user name contains non ascii elements (there still might be problems, will fix once they are reported by someone)
- subtitle: auto embed first
- x264: 'preset faster' + minimize caused broken call
- *changed*
- chapters: add a chapter every Xth key frame
- tools: 'Clear all cached tool infos'-button to enforce clearing and checking of tool paths and versions
- *cosmetics*
- subtitle: 'color-select'-buttons got an image
- *changed*
- tools: exchanged the MP4Box version for Windows for the experimental DivX265 CLI support, updated tsMuxeR
- *fixed*
- jobs: remuxing mkv(MPEG-4 ASP, X) -> avi(MPEG-4 ASP, X) missing subjob-ID in name
- tools: tsMuxeR version detection
- *fixed*
-
- extract: mencoder/mplayer audio extraction
- input: crash when using DVD input on Windows Systems (caused by a threading bug in QT5)
- audio: faac encoding with ffmpeg as decoder
- audio: ffmpeg audio encoding with raw output didn't always use the proper output path
- audio: ffmpeg audioID and ffmpeg audio index were mixed up on some audio extraction calls
- a bunch of Mac OS X related problems
- vp9: ffmpeg outputting yuv4mpeg instead of rawvideo when feeding vpxenc
- analyse: analyse all title on a DVD not just all after the first selected
- x264: error when applying 'zerolatency' tune option
- jobs: merging of ffmpeg audio&video extraction calls with single audio source
- input: wrong source selection when loading Blu-ray content through mplayer/mencoder since it uses it's own (not documented) mplsBlu-ray title mapping. -> dropping support for libbluray in mplayer/mencoder
- muxing: automatic passthrough audio/video title, crash
- *changed*
-
- muxing: less folders to delete on AVCHD creation with tsMuxeR 1.11.x+
- lot of refactoring to keep code base maintainable
- *cosmetics*
-
- resize: option to decide whether or not 'keep resize on source change' will be dis-/enabled depending if the source is a multi- or single source
- encoder: Windows only: !experimental! DivX265 Command Line encoder support (muxing to mp4 requires recent MP4Box version), progress indication only works if ffmpeg is used as decoder. -> it's mainly ment to simply have a GUI for it, even if the options are really restricted (not by Hybrid but by the cli encoder itself), copy DivX265.exe into your Hybrid folder to try
- *added*
-
- added source selection option to Audio-tab
- show current title in window title for multi source input
- *fixed*
-
- avisynth: handling avisynth input with ffmpeg
- audio: trueHD -> ac3 extraction when ffmpeg was used on Windows
- input: switching between mpls files caused problems
- input: mpeg file extension not properly detected due to typo
- input: chapter selection for DVD and Blu-ray
- input: DVD + 'auto add (first)' did sometimes not work properly
- filter: deinterlacing wasn't always deactivated when both forced and auto deinterlacing were disabled (and the input scan type was detected as interlaced or telecine)
- model: inconsistent model state in combination with cut support
- mux: avi -> avi video passthrough
- preview: Blu-ray preview on Mac OS X
- subtitle: input dialog did not filter the files by extension
- subtitle: subtitle names where of if the name contained multiple '.'s
- tagging: problems with audio tagging on structure generation
- tools: MediaInfo wasn't detected properly on Linux
- vp8/9: arnrMaxFrames was limited to 25 instead of 15 ;)
- x264: mediaInfo import, qmin was ignored due to typo
- x264: command line imported could crash when vbv-maxrate or vbv-maxbuffer was used
- x264: minimize CL missed some settings it could hide
- *changed*
-
- analyse: adjusted analyse to when tsMuxeR is not resent or can't be used
- audio: only handle ac3, dts and wav audio with delaycut (too many problems with mp1/mp2/mp3 compatible audio)
- automation: when extracting all subtitles, extract them all in one go for m2ts and mkv
- jobs: joining audio extraction calls into one if possible (downside: more temporal space is required, upside: audio extraction is faster)
- x264: disable profiles below High10 if bit depth is not 8
- *added*
-
- avisynth: InterFrame, RGBAdjust, Camcorder Chroma Denoise (requires avisynthExtension update)
- jobs: option to change the priority of a running/stopped/paused job (->of all it's subjobs). (not recommend)
- mac: keyboard input was not captured properly
- misc: option to enable ssl mail/irc communication and added field inside the gui to set the mail/irc settings
- misc: option to minimize job calls; this will combine extraction calls for mkvextract, ffmpeg and tsMuxeR (sadly I haven't found a way to extract multiple streams with mencoder or mplayer) if possible
- tools: warning regarding fonts if some fonts are present on Mac OS X
- *fixed*
-
- avisynth: problem with 'SupTitle'-plugin
- avisynth: mma2 filter
- avisynth: version.txt file to make sure the current avisynthExtension version is used
- avisynth: added format="YUV422P8" to LWLibAVVideoSource-call if input color space sampling isn't 4:2:0
- chapter: import of mkvextracts chapter files
- cosmetics: make sure to switch to Main-tab after loading a GlobalProfile
- cosmetics: taskbar-icon progress indication on Win Vista/7
- cosmetics: jumping cursor while editing tags
- input: mplayer analyse call for .webm-content
- input: 5.1 audio sometimes was detected as 2.0 (due to change in MediaInfo cli output)
- fontconfig: move font cache to %APPDATA%/fontconfig/cache instead of %TEMP%fontconfig/cache
- model: FilteringModel wasn't always saved properly
- tools: ffmpeg version in last release had problems with WinXP
- vp9: tile limits were off
- *changed*
-
- avisynth: using FTune and SangNom2 instead of TurnLeft/TurnRight and SangNom
- cosmetics: also show current bit rate during x264 encoding
- jobs: handling what to do when the output already exists,...
- *added*
-
- input: option to tell Hybrid if it should take the normally signaled or the original resolution
- jobs: option to send ssl-email when job and/or queue is finished (smtp server infos need to be configured through misc.ini); non-ssl servers are not supported
- jobs: option to connect to irc via ssl and send a message (irc server infos need to be configured through misc.ini); non-ssl servers are not supported
- *fixed*
-
- audio: don't try to extract dts core from audio with less or equal then 6 channels
- jobs: sub-job-counter was not reseted properly
- jobs: mpeg-4 asp to mvk workaround
- jobs: tsMuxeR AVCHD creation temp file
- subs: index mistake which could cause unknown parent error,..
- subs: embedding subtitle into ProRes encodes
- tagging: available subtitles contained elements multiple times
- x264: input color space sampling was off when input didn't have same color space sampling as output
- *changed*
-
- switching to Qt5.1 for 64bit Windows build
- preview: use libbluray if mplayer supports it for preview
- tools: added 5s timeout to tool-check again
- input: apply file filtering for monitored folder
- *added*
-
- audio: option to automatically add the original audio track via passthrough whenever a reencode of a track is added.
- audio: 'restriction by language' option for 'auto add (all)' and 'passthrough all'
- avisynth: option to always use lwlibavsource instead of ffmpegvideosource
- avisynth: option to reset the settings of a specific filter
- *removed*
-
- vp9: vp9 support for 1.1.x experimental builds
- *fixed*
-
- analyse: compatibility to when ffmpeg wasn't build with libbluray support
- audio: latm based aac audio extraction
- avisynth: blu-ray input, playlist loading
- avisynth: embedding idx/sub subtitles
- avisynth: did not automatically disable auto deinterlacing if input&output were interlaced.
- chapters: visual chapter selection was broken due to latest update to support different chapter formats
- input: language detection with mplayer
- jobs: bug creating mencoder decoder calls for mpls input
- tools: checking for qaac and fhgaacenc requirements
- *changed*
-
- input: mkv attachment type 'ttc' added
- input: removed unneeded video extraction on blu-ray input if ffmpeg is build this libbluray
- decode: prefer ffmpeg + mencoder instead of mencoder only for blu-ray input if ffmpeg supports libbluray
- vp9: adjustment to new vp9 options
- tools: switching to 'which' to find tools on Linux&MacOS
- *added*
-
- audio: option to automatically add the original audio track via passthrough whenever a reencode of a track is added.
- audio: 'restriction by language' option for 'auto add (all)' and 'passthrough all'
- avisynth: option to always use lwlibavsource instead of ffmpegvideosource
- avisynth: option to reset the settings of a specific filter
- *fixed*
-
- audio: ffmpeg id mapping
- chapters: visual chapter selection was broken due to latest update to support different chapter formats
- extract: extracting from mpls/m2ts by boosting the probe- and analysesize
- input: 'MPEG-1/2 L3' -> mp3
- input: language handling of subs 'en / en' -> en
- input: length detection on some blu-rays
- output: name generation was async between model&GUI
- tagging: for multiple inputs
- tagging: clear on input change
- tools: registry checks for qaac Apple Application Support and Winamp were broken
- *changed*
-
- cosmetics: rearrange some elements in the Config-tab
- extract: prefer extraction of lpcm audio with ffmpeg if it supports libbluray over tsMuxeR
- input: use lavf demuxer instead of mpegts for TransportStreams (on non-Windows systems)
- input: ignore DTS Express audio streams inside transport streams
- input: if a single video stream does not show any video infos only remove this video stream not all
- *added*
-
- audio: 'restriction by language' option for 'auto add (all)' and 'passthrough all'
- cut: option to en-/disable the key frame extraction during cut support
- gui: option to remove the PayPal-Logo/Button, through misc.ini option 'removePayPal=true'
- extract: option to prefer ffmepg for transport stream handling if ffmpeg is compiled with libbluray support
- *fixed*
-
- extract: trueHD extraction using tsMuxeR (naming problem; extension needs to be .ac3 not .truehd)
- gui: fixed some glitches with drop-down boxes on linux&mac
- input: he-aac v2 audio channel count detection
- muxing: muxing paff content with mkvmerge or MP4Box
- subs: language got lost with tsMuxeR + 'all subtitles'
- subs: batch processing
- tools: checking of tools with custom path
- *changed*
-
- audio: cosmetics, move audio profiles out of reencoding box
- audio: "Stream extraction with ffmpeg" now also influences audio extraction from Blu-rays if ffmpeg support libbluray
- avisynth: use LWLibavVideoSource for interlaced avc if DGSource is not supported
- cut: improving cut sync on video passthrough by detecting key frames and only allow cut start at key frames
- extract: cut on ffmpeg audio extraction
- input: automatically switching to ffmpeg as extractor for audio&video streams from Blu-rays if ffmpeg support libbluray and tsMuxeR generated names would get too long
- tools: ffmpeg libbluray detection
- tools: ffmpeg version for mac now also comes with libbluray support
- tools: check for flac in addition of just flaccl when on non-Windows systems
- *added*
-
- fonts: button to delete content (fonts only) of 'custom font folder'
- *fixed*
-
- audio: cbr mp3 encoding calls
- cut: when audio was handled through ffmpeg
- extract: file extraction check on mp4 files
- extract: tsmuxer subtitle extraction
- input: of multiple blu-rays in a row
- input: name generation with drag&drop and adjust output to input path
- muxing: making sure the chapter have no ms info for tsMuxeR
- muxing: use DAR instead of PAR when using '-aspect' with ffmpeg to create an .avi
- subtitle: bug causing subtitle passthrough to fail
- subtitle: subtitle extraction from transport streams with multiple '.' in their names
- x264: switching between 8bit and 10bit didn't reset qpmax properly
- x264: High 4:4:4 wasn't properly added to the command line
- *changed*
-
- avisynth: also adding RequestLinear(..) for DGMPGDec not jsut DGDecNV
- avisynth: SalFPS3, resize to mod8 for widht&height if input is not mod8 for width and height
- avisynth: use Preroll(100) instead of RequestLinear(rlim=50,clim=50), to lower RAM usage
- audio: make sure mencoder/mplayer is used for .ifo input (NOT RECOMMEND)
- extract: use ffmpeg for Blu-ray stream extraction if ffmpeg supports libbluray and 'Stream extraction with ffmpeg' is checked
- resize: pixel aspect ratio changed on encoder selection
- x264: when importing VBV values via command line import, 'Keep VBV values' automatically gets enabled
- *added*
-
- chapter: .txt added to accepted chapter extensions on import
- chapter: added support for BSPlayer and SVD chapter format on import
- cosmetics: donate button to main-tab
- input: option to automatically extract embedded fonts from mkv files to an internal font folder
- jobs: option to automatically save the job list whenever a job is finished
- muxing: option to always use ffmpeg instead of mencoder for avi muxing
- muxing: option to set if the fourcc for mpeg-4 asp content inside an avi container should be XVID or DX50
- subtitle: option to select which subtitles streams to process (using multiple languages instead of just one)
- *fixed*
-
- audio: fixed rounding error during decimal -> fraction conversion
- avisynth: DGDecNV deinterlacing wasn't offered for avc content (typo)
- cut: audio cutting on reencode
- extract: video extraction preferred ffmpeg instead of mkvextract (which should be the default)
- input: auto load audio
- internal: threading bug during getToolVersion (linear now)
- output: tagging of raw streams that get muxed to m2ts
- output: extracting raw streams from m2ts files
- output: m2ts language tagging
- output: m2ts aspect ratio overwriting on passthrough
- output: mp4 muxing with timecodes during passthrough
- preview: on mac - colors were limited to TV range
- preview: on mac - shifted image on input for fps with fps denominator != 1
- resize: cosmetics, 'Picture Resize' was inaccessible when 'Convert output to PAR' was enabled
- *changed*
-
- general: max resolution from 4098x4098 to 8196x8196
- ProRes: ProRes encoder names changed on 11th of April 2013 -> adjusting calls
see: here
- *added*
-
- tagging: option to decide whether the first or second language acronym will be used during tagging
- *fixed*
-
- input: grabbing ffmpeg id from m2ts files
- input: mbaff accidently identified as progressive
- interface: toolTip side bar did not get updates for Main-Tab
- *changed*
-
- output: disabled 'Add Titleinfo' and 'Add Chapterinfo' by default (Config->Output->Filename Generation->Output Filename Generation)
- *added*
-
- cli: added '-autoAdd' parameter with 'add' and 'addAndStart' as options
- *fixed*
-
- audio: delaycut version detection on Win8
- audio: output of lame wasn't checked for existence
- audio: lame min audio quality value is 0 not 1
- analyse: added "--Language=en" to MediaInfo, to make sure it's output is english
- avisynth: don't try to use l-smash-source or DgNVDec if AVC High 10 or higher is used
- avisynth: TDeint&DGDecNV bobbing not triggering frame rate change calculation
- avisynth: DGDecNV, fft3dgpu, tdeint tooltip infos
- avisynth: setting of tfms external deinterlacer
- calc: fhg + cbr audio size calculation
- filter: postprocessing was called before gradfun, needs to be the other way around
- input: blu-ray input where multiple files are connected through a playlist
- input: dvd title detection problem
- input: problem with .mpls with single audio stream
- muxing: avi muxing, 1:1 aspect problem
- muxing: switched to mencoder as .avi muxer for single audio files, since ffmpeg can't handle audio delays properly, see: http://forum.selur.de/post3080.html
- output: Mpeg-4 asp .avi muxing
- tooltips: not showing in tooltip side bar for some tabs
- x264: qpmax = 51 + (depth - 8) + 18
- x264: command line import did ignore psy settings (trellis, psy-rd)
- x264: a bunch of updates didn't make it to the model :/
- x264: ignore '--opencl' if rc-lookahead is 0 or curveCompression is 1
- *changed*
-
- avisynth: cleanup, delete DGIndex, DGIndexNV .log files
- crop: clear crop-cache when min width/height mult changes
- extract: use mencoder/mplayer to extract wav audio from avi
- output: file name generation adds _new if output already exists
- subtitle: subtitle input changing input folder depending of something was extracted from current source or not
- x264: set profile to High4:4:4 and output color space to i444 if lossless encoding is enabled
- x264: set output color space to i420 if lossless encoding get's disabled
- *added*
-
- audio: option to disable auto delaycut when muxing to mp4
- audio: option to choose whether 16bit or 32bit flac files should be created
- avisynth: anti-aliasing through EdgeSmoothFast
- avisynth: DeGrainMedian
- avisynth: Deen + option to denoise before deinterlacing
- avisynth: EdgeCleaner
- avisynth: toon filter
- cosmetics: hide/show columns in Job tab (+Model remembers visibility)
- cosmetics: start/end time in Job tab (+Model remembers header order)
- filtering: additional suboptions for the ivtc options
- jobs: cosmetics, show start/end time in job view
- jobs: cosmetics, columns can now be shown/hidden
- misc.ini: added support to set global profile through cli and misc.ini
- profile: option to save profile under currently selected name
- x264: option to minimize AVC level based on mbps (macoblocks per second) and bitrate
- *fixed*
-
- avisynth: DGDevNV-source and FilterView
- avisynth: crash with RemoveGrain due to SetMtMode(1)
- audio: dcaenc has problems with ffmpegs wav headers -> using sox as intermediate
- input: chapter selection did not always properly adjust the frame count
- profile: creation of new AV-Combo-Profiles was broken
- *changed*
-
- Blu-ray folder selection will not use the OS native FileDialog but a Qt specific on to handle Apples newest achievement in 'Mountain Lion' where they handle the BDMV folder like a package and not like a folder, which it is. (No, clue who came up with this 'excellent' decision,..
- *added*
-
- avisynth: basic support for TDeint as Deinterlace
- *fixed*
-
- subtitle: extraction from mpls/m2ts didn't work due to mistake on metadata file creation
- avisynth: wasn't used during decoding for DVD input even if the matching option was enabled
- *changed*
-
- preview: use '-ao win32' during windows preview
(otherwise playback will stop if another device has exclusive audio device access)
- preview: use '-ao win32' during windows preview
- *added*
-
- resize: advanced options for auto width/height adjustment
- ui: style selection (+ at the moment hidden support for styling), see: styling
- *changed*
-
- x264: adjusted x264 lookahead auto thread calculation to x264 r2260
- x264: removed x264 lookahead auto divisor after reading, see: doom9
- debug: added qt version to debugOutput infos
- x264: some cosmetic changes in the x264-tab
- avisynth: output infos when Avisynth and avsInfo versions do not match
- jobs: rewrote pause/resume/rest code to be more flexible
- *added*
-
- input: handling of stretched mkv streams
- input: typo during ffmpeg analysis which hindered the detection of the stream length (only needed if MediaInfo fails)
- avisynth: TFM on it's own didn't work
- avisynth: remove 'distributor()' from input script on audio extraction
- model: Prefer Original Frame rate setting wasn't loaded from a saved model :/
- model: crash when load/save/reset selected was pressed, before the dropDown box changed it's value
- *fixed*
-
- input: crash on input if avisynthExtension was not installed
- *fixed*
-
- input: option to prefer 'original' frame rate over container value, in general it is not recommend to use this, see toolTip
- *fixed*
-
- processing: all video stream were set to 25fps during job processing
- *fixed*
-
- audio: problem with 'adjust stretch to stream fps' mkv stretch handling.
- avisynth: ivtc + multiInput
- avisynth: 'resize before filtering' didn't do anything
- avisynth: converttoyv12 before wrongly flagged interlaced material didn't use interlaced= true
- avisynth: switching between FFmpegSource2 and DGDecNV
- decode: ffmpeg + yadif bug
- cosmetics: mix up with force output and custom par
- input: mkv stretch handling detection
- input: bug while grabbing the channel mapping
- input: 'mpls ignore'-settings got ignored sometimes
- muxing: cosmetics, regarding en-/disabling overwrite frame rate
- output: problem when remuxing h.264 to mov
- preview: combination of 'FilterView' + avisynthExtension + 'Horizontal split filter preview'
- preview: normal avisynth preview as broken if input needed deinterlacing and was cropped (width only mod2); added an ugly fix by resizing to mod4 after cropping (!only for preview!)
- preview: cropView sometimes used crop- instead of input-resolution
- processing: pausing of some some calls didn't work
- subtitle: language tag got lost during srt -> ttxt conversion
- x264: limit min-keyint to max-keyint/2+1
- decode: ffmpeg + yadif (custom) bug
- gui: stay on top
- *changed*
-
- audio: adjusted qaac audio progress indication to newer versions,..
- audio: delay no longer saved in audio profile
- audio: don't down-mix 6+ channel audio unless it's necessary
- avisynth: make sure DGDecNV is only used if width&height avisynth: tweaking setMTMode calls
- avisynth: disable MT if no fitlers are used that benefit from it e.g. just source filter and resize/crop
- avisynth: avisynth script view will now be shown in a separate window instead of a popup window
- avisynth: always set SetMemoryMax
- avisynth: make sure there's only one ConvertToYv12 call in the avisynth script (additional calls didn't hurt, but made the script more confusing)
- extract: H.264 from vfr .avi into mp4 container to not loose timecodes
- input: always use 'height&width' instead of 'original height&width' from MediaInfos output
- output: removed '_raw' from file name when extracting raw content
- preview: scaling down preview window if > desktop resolution
- refactoring, lowering complexity
- show x264 [info] output in log again
- subtitle: use av input path as default path on import subtitle if no subtitle has been loaded before,..
- x264: set 'Restriction Settings->Multi-slice' to 'disabled' when disabling 'Restriction Settings->Hardware' or selecting 'Restriction Settings->Hardware' to anything but 'Blu-ray/AVCHD'
- x264: enabling 'non-deterministic encoding' by default
- *added*
-
- avisynth: Levels(...)
- avisynth: support for LSMASHVideoSource
- avisynth: QTGMCs 'Select' got a new alternative 'FPSDiv' which calls QTGMC with FPSDivisor=2
- avisynth: vinverse
- avisynth: option to force decoding through avisynth even if it's not needed
- log: added context menu with 'clear' and 'copy to clipboard' to log in Main- and Log-tab
- muxing: option to add/remove the 'avc-1' brand for H.264 content while muxing to mp4 with MP4Box
- output: options to remove/add audioID, audioDelay, interalID from .raw output name
- x264: support for '--opencl' (Hybrid checks 'x264 --fullhelp' to check if the used version supports OpenCL or not)
- x264: changed default auto-lookahead-thread-divisor from 6 to 4 and added option to change the divisor
- *removed*
-
- mkv: header removal compression settings from all tabs aside from Config->Output->Container settings
- *changed*
-
- audio: changed audio handling methods regarding volume adjustment
- *changed*
-
- audio: gain&normalization sox calls
- cosmetics: rearrange audio&avisynth section
- *added*
-
- audio: options to tweak speedUp without pitch adjustment
- avisynth: gradfun2d, NoiseGenerator, AddGrain, Undot, MosquitoNR, HQDering
- *fixed*
-
- audio: speed/tempo wasn't respected on autoGain/normalize analysis
- audio: refresh ac3 dialog normalization from input when an audio profile gets loaded,...
- audio: NeroAacEnc binary didn't get properly set for job processing
- cosmetics: avisynth not properly hidden on DVD input while 'Avisynth for DVD input' was disabled
- cosmetics: some avisynth filters were not show
- tagging: crash when Config->Output->Container Tags was used on input without tags
- *changed*
-
- analyse: make sure mkvinfo is called with --ui-language en/en_US
- cosmetics: renamed "VP8"-tab to "VP8/9"
- cosmetics: adjust button icon sizes on fontSize change
- input: added .m2t as tsMuxeR and DGDecNV compatible container
- input: mediaInfo video length output when parsing mpls files will be ignored now
- preview: always more upper left corner of the preview Window to 0x0
- preview: if preview window size would be larger than the desktop resolution the preview window size gets halved
- *added*
-
- avisynth: added 'BlindDeHalo3_MT', see: http://forum.doom9.org/showthread.php?p=622289
- encoder: rudimentary vp9 support (simply replace '--codec=vp8' with '--codec=vp9'); be warned that a. vp9 is slow and b.vp9 is experimental in it's current stage
- input: option to pre-select the useable .mpls-files through ffmpeg if ffmpeg is compiled with libbluray support
- telxcc support to allow Teletext to .srt extraction/conversion on transport stream input
- x264: option to import 'Encoding settings' from current input, if input was encoded with x264 and an 'encoding settings' entry.
- *fixed*
-
- chapters: on multiInput chapters were not updated properly on job queue creation
- cosmetics: disable subtitle tab if video handling is set to 'ignore'
- cosmetics: removed "convertSubtitleQueueforMP4..."-popup I accidently left
- missing ',' on ffmpeg decoder/filter call
- muxing: 'audio only'-muxing to mkv container crashed
- output: mkv typo 'no_cue_relative_positions' -> 'no_cue_relative_position'
- subs: problem with subtitle modify option
- *changed*
-
- avisynth: extended avsViewer to show histogram
- cosmetics: hide queue text as when queue is not empty
- cosmetics: replace dropDown with menu on mac
- input: rewrote the .mpls parsing code
- *added*
-
- subs: support to use BDSup2Sub.jar instead of bdsup2sub++
note: Hybrid does not check for Java, it's your responsibility to make sure 'java -jar BDSup2Sub.jar' can be called from the terminal/console
- subs: support to use BDSup2Sub.jar instead of bdsup2sub++
- *fixed*
-
- subs: convert .sup to .idx/.sub output check
- subs: problem when extracting subtitles from .mpls which spanned over multiple .m2ts files
- cosmetics: queue texts hindered misc.ini font size adjustments
- input: loading a normal source after a raw video source
- tags: tagging of audio streams from external source
- x264: save qt file not as flagged UTF-8 file
- *changed*
-
- analyse: if mediainfo does not report length and frame count, try to get length from audio info (provided by mplayer) and calculate frame count using frame count if present
- analyse: mplayer - switched '-identify' to '-msglevel identify=6'
- cosmetics: Video SpeedUp renamed to Stretch, since it deals with the mkv stretch value
- cosmetics: added a bunch of icons for buttons
- input: output info if stream and container frame rate do not match
- output: do not create jobs if output container is mp4, iTunes compatibility is enabled and the output content is interlaced (seems like iTunes&co do not support interlaced content)
- x264: set input lookahead to zero of b-frames is zero and 'minimize input lookahead' is enabled. Didn't cause any problems since with b-frames disabled sync-lookahead should not be used.
- *added*
-
- analyse: option to disable that Hybrid will ignore all audio of a source if mplayer reports "no sound" or "No audio stream found" for that source
- avisynth: added option to disable MT
- avisynth: 'resize before filtering'-option
- avisynth: 'denoise before restore'-option
- avisynth: avisynth: DGDecNV support (you need to copy your DGDecodeNV Files (DGIndexNV.exe, DGDecodeNV.dll, NV12ToRGB24_sm_10.cubin, NV12ToRGB24_sm_20.cubin, NV12ToRGB24_sm_30.cubin and the license.txt) into the avisynthPlugins folder (from the avisynthExtension) for it to work (and you need a CUDA graphic capable card).
- x264: option to overwrite '--lookahead-threads'
- subs: simplistic initial support for BDSup2Sub++ which can be used for Blu-ray .sup to .idx/.sub conversion
- *fixed*
-
- avisynth: added some additional ConvertToYv12 to handle non-Yv12 input
- avisynth: delete .log files created by DGIndex and DGindexNV
- decode: removed ffmpegs 'splicify' filter since it got removed November 2012 (totally missed that)
- extract: when cut&extract are used on mp4 files, ffmpeg needs to be used
- mux: crash when 'Adjust to stream frame rate' was enabled before loading a source
- output: mp4 + iTunes, muxing was wrong when for square pixel par
- output: vp6/8 to mkv, stream will now be extracted using ffmpeg and first put inside an .avi container (otherwise mkvmerge can't handle them properly
- *changed*
-
- extract: when extracting MPEG-4 ASP with mkvextract now .m4v extension instead of .avi
- avisynth: dgindex created an unwanted audio file during .d2v creation
- cosmetics: gui didn't show 'At crash play'-path
- *added*
-
- jobs: play buttons to play sound select to play on job finished/crashed and queue finished
- *fixed*
-
- extract: when extracting MPEG-4 ASP with mkvextract now .m4v extension instead of .avi
- avisynth: dgindex created an unwanted audio file during .d2v creation
- cosmetics: gui didn't show 'At crash play'-path
- *fixed*
-
- analyze: the interlaced analysis detected telecine material sometimes as progressive
- analyze: interlace detection now respects initial delay
- audio: crash due to a loop for multiaudio input
- avisynth: script generation for .mpls input
- avisynth: fixed a bunch of problem related to sRestore
- crop/resize: fixed a bug during crop detection
- input: pixel aspect ratio 0.889 now matched to 8:9
- output: remuxing mkv(vfw) -> mkv
- output: par wasn't overwritten properly through mp4box
- subs: subs: problem during srt to ttxt conversion
- x264: 2pass 2nd pass call, when selected alone
- *added*
-
- audio: option to adjust audio delay accordingly when audio speed is changed
- audio: options to set aften 'drc'&'dnorm' signaling when using aften encoder
- filter: 'progressive to interlace'-option which will convert e.g. 60 progressive frames per second to 60 fields per second
- input: additional option to filter the playlist-listing of blu-rays
- output: mkv option to set some additional tags from [url]http://matroska.org/technical/specs/tagging/index.html#tags[/url]
- output: added options to disable cue duration and relative position elements
- preview: alternative filter preview (half width, each)
- progress: option to limit the progress indication to 'X%' without more detailed explanations
- tagging: audio&subtitle tags weren't updated properly
- tagging: option to passthrough audio title, video title and language
- *changed*
-
- cosmetics: adjust icon size to size of the rest of the ui
- cosmetics: replaced a bunch of RadioButtons with menus (on Linux&Windows), with ComboBoxes on Mac
- cuda: text when a no nvenc-compatible card was detected
- general: some refactoring&cleanup
- general: switching to Qt 4.8.4 (fixes Win8 drag&drop problem)
- input: filtering out .mpls files where the general length does not match the video length
- jobs: checking on job start that output folder exists
- x264: don't use internal decoder if MediaInfo output contains 'TCOD' and 'TCDO' data
- *fixed*
-
- audio: extraction of ac3 audio from .mpg is broken in mencoder (for at least a year!) -> Hybrid now uses mplayer instead of mencoder for the extraction of audio from .mpg files
- audio: handling of 7.1 thd audio
- audio: mkv strecth handling '.. to speed change' was broken
- audio: mkv stretch handling coding in name
- audio: normalize did not take remix into account
- crop: crop resolution was not updated properly in 'Avisynth'-Crop style
- cosmetics: on KDE based systems QTimeEdit wasn't initialized with 'hh:mm:ss' format
- filter: autocrop for dvd input
- input: dvd selection start&end time got mixed up which could cause Hybrid to always encode/passthrough the whole stream
- muxing: progress indication while muxing with ffmpeg
- subtitle: adding subtitle from dvd to mp4
- subtitle: subtitle were not deleted even if 'delete subtitle after muxing' was enabled for mp4 output
- tags: tagging was broken due to file naming changes
- x264: tune->animation could trigger Hybrid to enable b-frames in base profile
- *changed*
-
- audio: dts-hd core extraction now also supported for mkv content
- file: language and delay extraction from file name
- filter: lower stretch stream tolerance
- *added*
-
- audio: sox 'pitch' option as 'change pitch by'
- dependency: Hybrid now also uses FLVExtractCL cpp to extract flv timecodes infos
- output: name generation got a new option 'use chapter name'
- *removed*
-
- audio: gain sub options, after some testing anything besides '-nb' is really useless, so switching to '-nb' and removing the option
- *removed*
-
- filter: 'ivtc' got removed, since it seems to be broken (filmdint and detc are prefered)
- *changed*
-
- analyse: only allow 16/15, 8/9, 64/45, 32/27 and 1/1 as aspect ratios for vob files (DVD input)
- avisynth: use ffmpeg source for interlaced avc not DirectShowSource
- checks: allow cutting if ffmpeg is set as extractor even if input is a transport stream
- input: making sure ffmpeg is used instead of tsMuxeR to extract LATM muxed audio
- input: 'Config->Input settings->Input Extensions->Only support' now also filters the 'Main->Input File'-dialog content.
- muxing: mkvmerge: only set '--default-duration ...' if input and output fps differ, otherwise interlaced/progressive mixed content will cause problems
- video: disable cuda encoder on systems without a cuda capable card
- *added*
-
- avisynth: option to use .d2v.bad instead of .d2v (workaround for, something that is probably a 'bug' in DGIndex)
- crop: option to color the crop width&height spin boxes red if the widht/height value is not modulo X without rest.
- decoder: option to flip rgb output when decoding is done with mencoder or avisynth
- filter: option to overwrite input scan type
- filter: "softpulldown + detc" and "softpulldown + filmdint" to handle mixed (progressive telecine) material
- *fixed*
-
- analyse: fixed stretch stream length analyses when no simple blocks were present
- analyse: for multiple input, not all files were processed properly
- analyse: handling of ac3 with 22.05kHz
- analyse: Hybrid stayed grayed out when, the interlace analysis with mplayer crashed
- avisynth: tivtc output frame rate calcluation for mode 2
- avisynth: videoformat and interlaced result were mixed up :/
- audio: when settings aac profile and than changing the channel count (e.g. by changing the downmix), aac profile changed, even when not needed
- autocrop: didn't work properly for dvd input,...
- batch: during intake not all files were processed properly
- cut: cutting sometimes was ignored for the video stream (not sure if the problem is completely fixed ;))
- extraction: tsMuxeR .meta files now are always coded with the current system text encoding
- filtering: once dvd and non-mod4 resolution was selected filtering was disabled, but not enabled if the crop resolution was mpd4 again
- input: auto audio loading was broken due to recent auto handling changes
- input: batch - choosing 1st video stream for all sources
- input: blu-ray input analysis
- input: dvd input analyse finished not always called
- input: crash on Windows XP with long file names
- muxing: adding multiple idx/sub subtitle to an mp4 file added to many subtitles
- mxuing: change speed for .avi output
- muxing: ignore empty subtitles
- muxing: tsmuxer meta files now are always coded with the current system text encoding
- preview: window height
- sample: file name mix-up during sample creation for mp4 files
- srt2ttxt: fixed file naming
- subtitle: accidentally the 'submit' and 'cancel' buttons in the subtitle modify dialog were hidden *gig*
- xvid: missing quotes around stats file
- x264: VUI color adjustment depending on input
- x264: VUI color adjustment did only work if hardware restrictions were selected
Adjustment works this way:- check source contains color matrix info (if it does take the info)
- if source has no color matrix info and is
- MPEG2 assume input as BT.709
- MPEG1 assume input as BT.601
- width*height > 720 * 576, assume BT.709
- width*height
- muxing: adding multiple idx/sub subtitle to an mp4 file added to many subtitles
- subtitle: accidentally the 'submit' and 'cancel' buttons in the subtitle modify dialog were hidden *gig*
- *fixed*
-
- audio: if lame/oggenc/faac were missing, Hybrid didn't always switch to ffmpeg during job creation
- cosmetics: F10-log showing in left corner on linux&mac systems was broken
- video: calculation of maxLevel (4.0 wasn't identified as 4)
- avisynth: fft3dgpu needs SetMode(5)
- x264: when '--aq-mode 2' was selected '--aq-strength' got ignored,..
- job: 'on queue finished' 'call external', allows to specify a command call Hybrid will execute once the queue is finished
- config: device root wasn't accepted as valid path
- audio: during batch processing audio queue was cleared to early
- mkv: option to extract&passthrough attachements
- input: auto routines aborted if an raw audio stream was present
- input: DivX3.x was falsely detected as MPEG-4 (and it isn't mpeg-4 asp compatible)
- input: mp4 vfr handling (mp4fpsmod update)
- x264: making sure that only on 32bit systems avisynth scripts can be directly opened through x264
- *added*
-
- mkv: options to use '--engage no_simpleblocks' and '--disable-lacing'
- crop/resize: option to select old 'autoCrop behavior' and to specify the number sections to be scanned by new behavior
- avisynth: option to specifiy order for qtgmc input
- *changed*
-
- autocrop: change autocrop calls for some input files
- crop/resize: moved AutoCrop options to 'Crop/Resize->Misc'-subtab
- preview: added '-nocache' to mplayer call (fixes some avsynch issues with mkv files during preview)
- cosmetics: making sure long profile names to not influence the gui width
- input: removed *.m4v as raw video extension, since ipod m4v is more frequent than raw mpeg-4 asp streams
- thumbnails: resize thumbnail for anamorph output
- map MPA2L3 to mp3
- changed a lot of internals to better handle non-ANSI based filenames
- *fixed*
-
- input: handling of wmv input
- input: autocrop problem with some sources (cropped to much)
- input: dvd subtitle passthrough
- crop: crop limits were ignored
- crop/resize: Maximize resolution/letterbox problems
- filter: 'Scale output fram rate' was not always interpreted properly
- decode: ffmpeg crop call used a wrong order (unbelievable how long this bug survived ;))
- audio: missing mkvmerge path in Audio-tab, causes an error when a mkv file was opened in the Audio-tab
- audio: unwanted audio streams in queue bug
- audio: ffmpeg->sox->ffmpeg problem (happend during audio encoding through ffmpeg)
- audio: respect downMix&DRC during autogain/normalize analysis
- audio: drc + gain/norm
- audio: communication between sox and ffmpeg will now be done using the sox format (otherwise sox->ffmpeg seems to make problems on some sources)
- audio: trueHD 5.1 extraction problem
- *added*
-
- audio: opus encoding support (requires opusenc and supports only raw-output)
- audio: additional options for the audio 'gain'-option
- resize/crop: "Crop/Resize->misc->Misc->Limit resize to crop resolution": restricts the resize resolution to be always less or equal to the input resolution and thus hinders any upscaling
- input: option to set a minimum length for DVD titles for Hybrid not to ignore them
- *added*
-
- general: make sure audio/subtitle/chapter queue are emptied whenever 'Input File' is clicked
- audio: switching to ffmpegs aac encoder if libvo_aacenc is selected but more than 2 channels are present (libvo_aacenc) seems only to support mono and stereo output
- audio: added w64 to the raw audio extensions
- audio: multichannel audio will now be exported as a w64 wave file
- *fixed*
-
- audio: ffmpeg->sox->ffmpeg problem (happend during audio encoding through ffmpeg)
- audio: audio pcm vs. wav extension problem
- audio: if lame/oggenc/faac were missing, Hybrid didn't always switch to ffmpeg during job creation
- avisynth: tresh bei sRestore, had wrong value ranges
- avisynth: basic sRestore-Support (remember to update the avisynthExtension)
- cut: some cut-support related problems
- filter: framecount: didn't adjust frame count due to deinterlacing&co
- input: chapter selection vs. start/end time problem
- thumb: undid some changes from last time,..
- audio: adjusted Hybrid to handle completely silent audio streams (crashed since normalization&autogain didn't work)
- *added*
-
- audio: support for fdk-aac, due to license issues this is only useful for people who compile their own ffmpeg version with fdk-aac support
- audio: 'dynamic range compression'-option, thanks to tebasuna51 who implemented some profiles for BeHappy which I now integrated into Hybrids sox options.
- avisynth: TemporalDegrain as grainHandling option
- avisynth: option to move deblocking before the deinterlacing block if an avisynth deinterlacer is used
- avisynth: 'Show avisynth script'-button some one can have a look at the avisynth script Hybrid generates.
- misc: additional paths to search for tools by specifying 'toolPaths' in the misc.ini
- *changed*
-
- audio: communication between sox and ffmpeg will now be done using the sox format (otherwise sox->ffmpeg seems to make problems on some sources)
- audio: added '--threading' to qaac calls
- audio: by default set 'Multithreading for sox' to be enabled
- analyse: ignore mplayer video ids of typ png/mjpeg if input is an mp4/mov file; otherwise cover art get's interpreted as video stream
- cut: adjust cut start/end times when chapter selection changed
- audio: removed unneeded addional '--multi-threaded' in sox call if multithreading is enabled (cosmetics only)
- infos: video 'SpeedUp' value not displayed (cosmetics only)
- *fixed*
-
- x264: command line import didn't enable 'x264->Main->Restriction Settings->Hardware' when importing '--bluray-compat'
- audio: don't do truehd->wav conversion, just because delaycut is enabled
- audio: typo/formating when extraction audio with mplayer
- decode: making sure ffmpeg also disables subtitles during decoding
- preview: avisynth filtering was used in preview even if video was set to 'ignore' or 'passthrough'
- *added*
-
- analysis: option to select whether or not Hybrid will use 'Original pixel aspect ratio' or 'Pixel aspect ratio' when both are presented through the MediaInfo-analyzer
- *changed*
-
- tools: recheck tool version when the path to the tool was changed manually.
- *fixed*
-
- thumbs: fixed crash if thumb nail creation was active for audio only jobs
- subtitle: overwriting font size didn't work
- subtitle: ssa subtitle accidently got .srt extension during extraction
- subtitle: subtitle language tagging sometimes did not work properly
- subtitle: filtering of subtitle queue for Blu-ray
- input: handling of mkv files with no frame count/rate/mode info
- avisynth: disable MT support if TextSub is used
- avisynth: option to disable ffmpegsource single-thread enforcement
- avisynth: srt subtitle styling
- preview: subtitle style overwriting not always viewable in preview
- timecode: if the last time code entry is a zero, it will be removed
- analyse: crash when MediaInfo detected 'Original Frame rate'- and no 'Frame rate'-info.
- avc: sometimes avcLevel restriction got triggered with input instead of output resolution
- job: Blu-ray + 'Queue Titles'
- audio: dts-hd channel count 8 / 6 detected as 6 instead of 8
- audio: automatically call to5.1 if input has 7.1 channels and output is ac3/dts
- x264: crash when enabling 'minimize AVC Level'
- x264: crf as zone option
- x264: output naming broke if output x264-10bit/9bit was used and output name/folder contained x264 in it.
- x264: progress to newest changes in r2204
- input: mac build ignoring keyboard input
- *changed*
-
- general: lowered mplayer/mencoder lavdthreads count to a maximum of 8 again
- general: disable qaac support if Apple Application Support is not installed (comes with Quicktime and/or iTunes)
- avisynth: added option to en-/disable if Hybrid converts .srt subtitles to .ass before embedding
- analyse: read analyzer output as utf-8 encoded
- analyse: MediaInfo detecteds 'Original Frame rate'- but no 'Frame rate'-info, 'Frame rate' is set to the value of 'Frame rate'
- subtitle: copy subtitle to tempPath before using
- audio: allow vbr preset 6 when fhgaacenc version >= 20120624
- audio: remove qaac if 'Apple Application Support' is not installed
- audio: remove fhgaacenc if WinAmp is not installed and the necessary libraries are also not present in the Hybrid folder
- audio: added warning when trying to encode 7.1 audio (can't be done with Hybrid since none of it's decoders can handle 7.1 input audio properly)
- *added*
-
- subtitle: option to enforce subtitling through mencoder even when avisynth filters are used
- joblist: option to get via right-click to the output folder
- warning: splitting from avi/mov/raw output is not supported atm.
- muxing: option to create a 1min sample file from the middle during mkv creation
- cuda: option to specify which gpu is used
- *fixed*
-
- profiles: saving a-v combo / audio profiles
- profiles: a-v combo profiles not always showing up in Main-tab
- input: handling of mkv files with no frame count/rate/mode info
- input: crash when loading some files combined with auto routines,...
- avisynth: embedding of multiple subtitle sometimes caused a crash
- *added*
-
- gimmick: iso creation for Blu-ray/AVCHD if imgBurn is installed on the system and Main->Structure is enabled
- model: added option to tell Hybrid to warn if current Config-settings differ from the default Config-settings,...
- *changed*
-
- x264: allow to specify a profile even when level is 'unrestricted'
- *added*
-
- audio: 7.1 to stereo/5.1 down mix
- muxing: option to add (multiple) audio and subtitle streams in a itunes compatible way (mp4 output will also be renamed to m4v)
- avisynth: added 'field matching' option to handle content that needs field matching
- avisynth: option to disable ffmpegsource single-thread enforcement (you might want to update the avisynth extension)
- *fixed*
-
- subtitles: subtitles were not always properly save as UTF-8 which could destroy the content for unicode subtitles
- subtitle: bunch of bugs related to text subtitle to ttxt conversion
- compatibility: accidentally 29.976 instead of 29.97 was used
- input: differentiate between m4v as mp4 container and raw MPEG-4 ASP
- audio: problem when reencode thd audio without an ac3 core
- audio: delaycut progress
- audio: handling of ogg vorbis audio
- automation: loop while extracting subtitles/audio infos from input
- mkv: using MediaInfos StreamOrder info instead of the ID for mkv versions 0.5.2+
- input: bug in 32bit version of avsInfo
- *changed*
-
- resize: 'keep resize for source' is automatically forced for multiInput
- audio: custom audio handling on multiInput now allows to specify which audio handling for which source,...
- cut: adjusting time codes when cutting
- extract/cut: when cutting mkv material 1st cut with mkvmerge than extract with mkvextract, than remux
- subtitle: rename tsMuxeR subtitle output files to contain subtitle language
- subtitle: when 'All subtitles' is enabled, for transport and mkv streams all subtitles will now be extracted in one go
- *Side notes*
- There's a bug in mediaInfo, which as been fixed for two weeks but since there has been no new MediaInfo release, Hybrid will still suffer from it, meaning Hybrid won't always detect a/v delay on Linux&Mac.
For more details see: http://sourceforge.net/tracker/index.php?func=detail&aid=3533984&group_i...
- *fixed*
-
- subtitle: 'Add' did not add elements to queue (when not used through automation routine)
- subtitle: subtitles sometimes were created a wrong location
- cosmetics: Crop/Resize->Main/Misc RadioButton were out of sync when Misc was selected and saved
- extraction: (mac only) exchanged mkvtoolnix with a newer version (still 5.5.0), which already includes the .264 extraction fix
- *changed*
-
- autocrop: tweaked autocrop for mpls/m2ts files
- *added*
-
- avisynth: added STPresso
- muxing: option to add (multiple) audio, subtitle streams and chapters in an iTunes compatible way
- *fixed*
-
- analyse: loading dvd input (was probably only broken on windows)
- subtitle: extracting subtitles in the subtitle tab
- *changed*
-
- autocrop: limit amount of frames scanned for mpls files which link to multiple m2ts files
- *fixed*
-
- input: dvd title selection not correct when dummy tracks were detected
- audio: lame encoding was called even when lame was not present
- general: fixed some problems when temp/output dir was empty
- *added*
-
- cosmetics: mac os progress indication on dock icon
- muxing: option to add itunes compatible subtitle infos
- tools: checks if ffmpeg/mencoder support mp3lame/vorbis/aac encoding
- audio: support for external faac/lame binaries
- *fixed*
-
- analyse: mplayer detecting unsupported audio streams
- filtering: bug in fractiondecimal conversion
- chapter: visual chapter point selection
- cut: dvd cut support
- audio: using ffmpegs internal encoder & sox caused output to be mono
- *changed*
-
- audio: now automatically fix audio streams with delaycut, if DVD is source and target is mp4 file
- *fixed*
-
- input: auto crop detection not working properly on transport stream containers
- preview: audio got disabled after "Filter View" was triggered the 1st time
- automation: rewrote a lot of code to handle the interactions of 'auto crop', 'pass-through subtitle', 'auto interlaced check'
- input: stream selection didn't work properly for multiple video input files
- input: better handling or blu-ray input and multi video input files
- muxing: problem with mov muxing (on Mac OS X)
- *added*
-
- outputPath and temPath variables are now read from .ini if present
- *changed*
-
- deinterlace: auto deinterlacing will only change the deinterlaced if the content is detected as interlaced and the deinterlacer is ment for IVTC or the content is telecine and the deinterlacer is ment for deinterlacing.
- output: avi output is allowed again, as a workaround to the ffmpeg bug, I'm trying to avoid to mux raw MPEG-4 ASP to .avi; Warning: if you use Hybrid to multiplex raw MPEG-4 ASP video into an .avi file, the output container flags will be wrong.
- *fixed*
-
- audio: ac3 sample rate/channel count/bitrate combinations, before some non-valid combinations were offered.
- analysis: automation - subtitle extraction + interlaced check could cause to Hybrid to stay grayed out
- subs: Hybrid now automatically creates necessary mplayer/fontconfig files; otherwise subtitle preview and embedding does not work (mac only)
- muxing: timecode handling for vfr->vfr
- *changed*
-
- analysis: speed up interlaced analysis by adding lavthreads
- *added*
-
- input: option to specify which files Hybrid will support as input (by extension)
- *fixed*
-
- muxing: accidentally frame count made it's way into the fps options,..
- avisynth: changing qtgmc->bob didn't change the displayer lables (encoding was fine -> just a cosmetic bug)
- handling: handling of vfr mkv/mp4 files (remember to enable: 'Config->Automation->Matroska Settings->Scan for streched streams' and 'Config->Input settings->General settings->Always extract timecodes from mp4/mkv/ files' for vfr handling)
- audio: extraction audio from .avi with mplayer
- audio: added '-strict experimantal' to the ffmpeg aac encoding calls (mac only)
- audio: crash on rename call after reencoding/extration
- audio: problem when fhgaacenc was enabled but not aac encoding
- tools: delaycut version detection fixed
- automation: autocrop and subtitle passthrough interfered,..
- muxing: mkvmerge does not support 'iw' as language, added workaround to change 'iw' to 'he'
- *added*
-
- input: option to filter out unwanted content by extension (files with the specified extensions will be ignored)
- input: drag&drop now accepts folders (in File input mode) and will also search through all sub-folder for content
- *changed*
-
- analysis: speed up interlaced analysis by adding lavthreads
- package: switching to an older mplayer/mencoder build since latest builds cause problems
- *fixed*
-
- vfw: fixed vfw video decoder detection on 64bit systems
- profiles: profiles with a '.' in the name weren't detected when saved,...
- muxing: accidentally frame count made it's way into the fps options,..
- *fixed*
-
- decoder: don't add '-demuxer lavf -vfm ffmpeg' to mencoder/mplayer call for avisynth input
- muxing: problem with x264 pulldown and m2ts output
- profile: loading a global profile was accidentally partially disabled in the last build
- *added*
-
- input: added support to decode RTV1/RTV2 content through avisynht&avisource if vfw decoders are installed
- *changed*
-
- preview: a/v synch delay handling
- mac: set default toolTip font size to 15px
- mencoder/mplayer: allow up to 16 instead of 8 threads, requires mencoder/mplayer revision r34866 or later
- jobs: abort when user tries to multiplex wma audio into a mkv file, since mkvmerge does not support wma audio
- *added*
-
- hidden: toolTipFontSize, option to set the toolTip-fontsize in pixel (mac os: default = 15, everything else: default = system.default)
- check: checking if ffmpeg is 32bit (only 32bit ffmpeg can open 32bit avisynth scripts)
- avisynth: experimental - video olny - trim-support
- x264: support for level 5.2, requires x264 rev. 2197+
- *fixed*
-
- analyse: avsInfo output was not properly parsed for audio data (looked into stdErr instead of stdOut output,... DOH!)
- avisynth: cut support was ineffective for when mencoder and avisynth were used in combination
- *update*
-
- mac: added a mac complete package to the downloads; since I'm really not used to deploy content on mac feedback is really appreciated
- *fixed*
-
- subtitle: bug that prevented the embedding/hardcoding of .idx/.sub subtitles
- analyse: ffmpeg analyzer not detecting length and sar properly (only needed as fallback when mediainfo fails)
- vp8: removed timebase parameter
- linux: lsdvd check was broken
- audio: audio bitrate choice bug (allowing bitrate choices for dts that are not supported)
- *changed*
-
- calc: dts inside m2ts overhead calculation
- vp8: default values minsection from 1 to 15 and lagInFrames from 16 to 25
- *added*
-
- avisynth: allow .sup embedding through SubTile (requires .Net), special thanks to Zach Saw allowing me to bundle it in the avisynth extensions pack!
- *added*
-
- avisynth: HDR AGC support, see: http://strony.aster.pl/paviko/hdragc.htm
- avisynth: FineSharp, see: http://forum.doom9.org/showthread.php?p=1569035#post1569035
- *fixed*
-
- prores/vp8: complaining about missing field 'interlaced'
- avisynth: fpsnum problem in ffvideosource
- audio: crash when loading audio model
- *fixed*
-
- AVComboProfiles: problem with pass-through audio + added ignore options
- jobs: hibernation call
- x264: missing '--fps X' when using --pulldown
- x264: qp file wasn't deleted on 1pass encoding
- gui: loading models could lead to wrong displayed values in ComboBoxes, due to a wrong regexp
- model: additional quotes in dvd input analyse model caused mplayer not to be properly found
- subtitle: crash in srt to ttxt routine
- *changed*
-
- muxing: allow mpeg-2 inside mp4 container
- *changed*
-
- avisynth: FFVideoSource, set fpsnum, fpsdenum for interlaced input
- avisynth: use DirectShowSource instead of FFVideoSource for interlaced avc content
- avisynth: LineDarken switch between LineDarkenMod and Hysteria
- avisynth: cosmetic rearrangements
- *added*
-
- filter: additional ivct options when using mencoder
- avisynth: added adding a logo support
- *fixed*
-
- filter: yadif - custom, mcdeint - custom settings not showing up
- checks: SD Blu-ray/AVCHD frame rate checks
- profiles: crash when loading a global or audio profile triggered by missing neroAacEnc, fhgaacenc or aften
- *fixed*
-
- avisynth: missing '(' for LanczosResize
- audio: fhgaacenc 'error-message' (linux only)
- audio: crash when loading external audio
- *fixed*
-
- x264: error when switching profiles between high10/high422/high444 and the rest
- avisynth: some cosmetics
- *added*
-
- avisynth: option to en-/disable distributor() call for preview
- *fixed*
-
- audio: to not adjust audio delay for encoder with Mkvmerge&NeroAacEnc since mkvmerge will do the job
- subs: crash on non utf-8 .ass/.srt to .ttxt subtitle
- tags: audio tagging with passthrough (for aac audio)
- analysis: tweaked analysis a bit more for telecine detection
- audio: 'Enable audio mkv default for each source' conflicting with 'Set as default for mkv output' when enabled after source was loaded and 'Pass-through audio default/force flags'
- audio: max bitrate mixup is qaac was enabled, but not target format not aac
- subtitle: extract pgs subtitle from mkv file
- *changed*
-
- audio: better compensate aac encoder delay
- avisynth: update to flash3kyuu_deband_1.5.0
- preview: removed 'distributor()' from generated avisynth scripts during preview; preview will be slow but otherwise some script, source combinations won't show up properly (no problem during encoding though)
- *addded*
-
- audio: support for fhgaacenc (windows only)
- *fixed*
-
- dvd: ntsc dvds not properly deteced as telecine
- jobs: "auto delete finished" and "on queue finish" collided
- avisynth filter view: with crop, resize, letterbox
- *changed*
-
- audio: enabled NeroAacEnc for Linux64bit again
- generate name: when 'Adjust output path to source path' output will be adjusted on a per file basis
- *fixed*
-
- chapter: dvd chapters not filtered for title
- input: not analyzing avisynth input properly due to changes in avsInfo
- missing version info for mkvmerge/mkvextract due to missing version info of delayCut
- interlace check not allowed to to twice with different percentages
- audio: bug in m2ts audio overhead calculation
- some cosmetic bugs,..
- video: cuda x264 filter: Blu-ray compatibility
- *changed*
-
- analysis: modified interlace detection
- *experimental*
-
- (windows only) avisynth script generation, see changelog in forum
- *fixed*
-
- cuda: encoding problem
- audio: audio extension problem
- audio: a few audio pass-through related problems
- *added*
-
- audio: option to enable '--multi-threaded' for sox
- filtering: experimental option to analyze input for interlacing
- *fixed*
-
- audio: dts-es accidentally detected as dts not dts-hd
- *changed*
-
- audio: added '-analyzeduration 14M' when handling .flv files with ffmpeg
- misc: default value of 'Analyse first/last vob of current title' to false (you need to reset GlobalModel manually to update)
- *removed*
-
- output: avi container support, since ffmpeg .avi muxing is broken (sets wrong frame rate, see: http://ffmpeg.org/trac/ffmpeg/ticket/978)
- *added*
-
- audio: flac -> compression level option
- audio: 6.1->stereo/5.1 downmix
- *changed*
-
- subtitle: removed -nofontconfig from mplayer/mencoder calls (+ windows installer: added fontconfig content to fonts folder)
- *removed*
-
- x264: 2pass crf - since it confuses people more than it helps
- *added*
-
- x264: support for high222 and high444 profiles
- *fixed*
-
- subtitle: allow to change subcode even if 'embed subtitle' is not enabled (for preview)
- *changed*
-
- subtitle: ass->ttxt - remove unneeded TextSampleDescriptions
- *added*
-
- subtitle: basic .ass styling support (use existing .ass files and overwrite some of the styling info); only basic support since I do not know much about .ass (got no complex examples&co; will do more if people want it and provide some samples)
- subtitle: .ass muxing into mp4 support (subtitle will be coverted to ttxt)
- *fixed*
-
- subtitle: first internal subtitle stream was also embedded when an external one was embedded
- x264: zone deletion did not directly update CL
- x264: loading a profile with none@unrestricted caused an error
- audio: don't resample on pcm extraction
- vp8: progress bar indication during encoding
- *changed*
-
- audio: max delay from 5000ms -> 60000ms
- general: removed close affirmation for 'jobs->on queue finished->close' even if 'Config->Internals->Handling->Warn on close' is enabled
- extended handling of stretched audio&video streams from mkv sources
- subtitle: libass is now always used when embedding text based subtitles
- audio: adjusted calls to delaycut 1.4.3.5.7
- *fixed*
-
- audio: delay handling was broken due to several problems
- windows: old avsInfo version was included in the packages
- preview: error regarding 'Interlacing' when using bob
- 'deinterlacer' not always getting properly enabled due to 'force deinterlace'
- *changed*
-
- mkv: workaround to handle changed TrackIDs from mkvtoolnix v.5.2.1+ (added version check routines to Hybrid)
- subtitle: always extract subtitle inside a mp4 file as srt subtitles
- *fixed*
-
- x264: mixup in x264 command line importer (--bitrate and --crf were mixed up)
- audio: don't fix crc on mpa files with delaycut when no delay is fixed (until bug in delaycut is fixed), see: http://forum.doom9.org/showthread.php?p=1548269#post1548269
- dvd: queue titles + chapter generation
- general: make sure subtitle&chapters are clear on drag&drop input
- dvd/queueChapters/queueTitles: fixed (no automated subtitle passthrough for queueChapters)
- mux: mvk->mp4 && mp4->mp4: avc remux problem
- general: make sure subtitle&chapters are clear on drag&drop input
- subtitle: wrong subtitle extension srt vs. ass on extraction
- subtitle: tx3g handling
- extract: wrong mp4 trackID problem
- subtitle: DVD/QueueTitle and subtitle handling
- audio: job handler: dcaenc output check
- *added*
-
- subtitle: skip subtitle option, subtitle extractor will not rerip files already present at target destination
- mkv: stretch detection option, which will cause Hybrid to analyse the input with mkvinfo and show stretch related infos if present
- *changed*
-
- audio: positive delay will not be fixed through tsMuxer is 'fix delay with delaycut' is enabled
- audio: adjusted to latest dcaenc -> needs dcaenc from 2011.12.30 or later
- audio: Hybrid will now check if ffmpeg and mencoder support faac
- *added*
-
- audio: option to fix crc error with delaycut without fixing the delay
- muxing: allowing wav/pcm in .avi
- *fixed*
-
- audio: delayCut + audio passthrough handling
- audio: pcm handling
- audio: if audio&video container differ, make sure mencoder is not used during audio extraction or encoding
- *changed*
-
- muxing: not using ID 1 for NeroAACEnc input but ID 0
- "auto add first" now also works for raw audio input
- audio: dts-byteswap enabled as default
- mac: switched to static builds (and included FrameCounter binary to the .app folder)
- *fixed*
-
- audio: remove '--multi-threaded' from sox calls since it caused problems for some users
- *fixed*
-
- audio: audio only handling
- windows: missing dlls for mp4box
- *fixed*
-
- audio: pcm extension and pcm handling problems
- jobs: handling of broken jobs
- x264: adaptive dct only disabled for base profile
- *added*
-
- rudimentary mov container support
- pcm encoding
- dts encoding through dcaenc
- demux: extract streams with ffmpeg option
- video: rudimentary ProRes encoding support
- option to enable adjust audio&subtitle adjustment on title change (not only on initial load)
- 'delaycut' and option to use delaycut to remove delays
- 'ignore'-parameter to misc.ini, if misc.ini contains for example: ignore=delaycut;neroaacenc
Hybrid will not post warnings about a missing delaycut or neroaacenc binary
- *changed*
-
- linux: removed 'warning' about missing avsInfo
- linux64: removed nero LineEdit-PushButton
- *fixed*
-
- audio: 'aac' container compatibility check
- qaac: audio count on downmix
- audio: Hybrid will no longer use mencoder for aac encoding (see: http://forum.doom9.org/showthread.php?t=162762)
- audio: enabling and setting 'mkv default' if item with 'mkv default' was removed from queue
- *added*
-
- mkv: muxing option to enable '--clusters-in-meta-seek' which some players need to seek properly in mkv files
- *changed*
-
- subtitle: allow setting of set mkv forced/default when queue is empty
- tags: allow to configure audio, video, subtitle tag settings (when no input is set)
- windows: check for UNC paths since oggenc2 does not support them
- *fixed*
-
- linux: aac encoding
- audio: don't show neroAacEnc on Mac and Linux64 systems
- qaac: cracking at beginning due to sox call adding wav headers
- *added*
-
- option to en-/disable using faac with mencoder/faac for aac encoding
- chapters: 'Add Chapters' option to add additional chapters every X min
- chapters: option to adjust chapter names: chapters that start with 'Chapter' or is empty will be renamed to 'Chapter X' where X is the chapter position
- *cosmetics*
-
- rearranged items in chapterTab
- *fixed*
-
- x264: bit rate was adjusted on two pass even when bit rate was preferred
- x264: weigthp with combination of preset ultrafast and tune fastdecode
- A/V-ComboProfiles
- general: guimodel hiccups
- qaac support for windows xp and newer (due to the need of current Quicktime)
- *fixed*
-
- x264: accidentally levels 3.2-3.0 were removed on high profile selection
- linux: preview bug
- *changed*
-
- x264: now ratetol will be disabled unless 1pass abr or 2pass with level = unrestricted is used (to avoid vbv-violations)
- *removed*
-
- linux: CUDA H.264 since there's no cuda encoder for linux atm,.. (probably easy to implement using current sourcecode and the linux libaries from the NVIDA SDK; anyone volunteering ?)
- *fixed*
-
- postponing of jobs
- cropping Preview
- *fixed*
-
- x264: 10bit replacement caused problems when path to x264 binary also included the string x264
- x264: Blu-ray checks regarding frame rate
- *added*
-
- 'Start Queue'-button in Main-Tab
- 'Stay on top'-Option in Config->Internals->Handling
- AV-Combo-Profiles (combination of a video and an audio profile)
- reading values from misc.ini file (must be located next to Hybrid binary) and look like:
[General]
fontsize=15
settingPath=PathtoSettingsFolderto create portable version of Hybrid, create a settings subfolder in the Hybrid folder and set the misc.ini to:
[General]
settingPath=.\\settingsside node: backslashed need to be escaped!
- options to pass-though default&forced flags for subtitle/audio when going from mkv to mkv
- Press F12 to abort subtitle extraction (in MainTab)
- option to select preferred mpeg2 decoder
- FilterView: allows to compare unfiltered and filtered source - for Denoise/Sharpen and Post-processing only; Requires uptodate mplayer and local ip connection between two mplayer instances
- Windows Installer: added Option to set Custom Hybrid Settings Path (thanks to Faust)
- using a combobox instead of a spinBox for subtitleSelection (not 100% sure if I didn't miss an index, so report if you run into an subtitle problem,..)
- using a combobox instead of a spinBox for audioSelection (not 100% sure if I didn't miss an index, so report if you run into an audio problem,..)
- when default container changed and generate is active output container will be changed too
- when input contains subtitle subtitle tab will be automatically enabled
- hand over audio delay to Preview even when audio is not from a seperate source
- notification that subtitle extraction starts/li>
- all hidden flags
- *added*
-
- x264: option to set output colorspace
- *fixed*
-
- x264&xvid: 2pass 1st pass output file handling
- windows packages: avsInfo was broken
- *added*
-
- DVD: dvdangle support
- rearranging of subtitle and audio queue items via drag'n'drop
- subtitle: move up, move down, modify, delete subtitle in subtile queue (by right click on the item)
- audio: move up, move down, delete audio entries in audio queue (by right click on the item)
- x264: allow switching between jvt, flat and custom quantizer matrix
- a simple thumbnail generation option (Config->Output settings->Container and Thumbnail Settings)
- misc: option to switch between mencoder and mplayer for dvd audio extraction
- *changed*
-
- subtitle handling: don't set mkv default&forced automatically
- always only save (name,value)-pairs in profiles and hopefully kill the need to reset settings
- *fixed*
-
- Xvid: removed profile=unrestricted from call
- x264: 10bit encoding
- *fixed*
-
- autoselection of audio/subtitle with language X
- *added*
-
- output name generation: 'Add parent folder name as prefix'
- subtitle: 'All Subtitle Extract/Add' only add/extract subtitle with language X
- *fixed*
-
- crash and problems with chapters (due to a missing whitespace :/ that I overlooked during refactoring)
- *fixed*
-
- x264: weighted-P option update
- *fixed*
-
- job creation
- *fixed*
-
- cudaH264: cq setting accidently disabled on "1-pass constant quantizer"
- cudaH264: changing target file size did not change target bitrate
- problem with aspect ratio and (crop-)preview
- problem with key-mapping during (crop- and) preview
- lagarith decoding: force -vfm ffmpeg for lagarith input when decoding with mencoder (due to ffmpeg decoder limitations currently lagarith decoding only works with yv12 lagarith)
- Xvid: resolution restrictions and restriction checks
- extracting audio with tsMuxeR when experimental cut support is enabled (workaround for tsMuxeR bug: audio extraction results in 0 Byte file when using --cut-start)
- extra ',' when using 'rotate'
- kerndeint calls by adding an additional scale before it
- x264: error message when preset calls changes weightedP, but interlaced encoding doesn't allow it
- *changed*
-
- removed '--aspect' parameter from mencoder call (should not be needed since output is raw)
- adjusting resize values when 'rotate' is enabled
- *added*
-
- removed '--aspect' parameter from mencoder call (should not be needed since output is raw)
- adjusting resize values when 'rotate' is enabled
- option en-/disable if mkv fps will be checked against average time code fps
- filter: gradFun, postprocessing options
- deinterlacers: "Yadif - custom" and "Mcdeint - custom", "linear interpolation - fast", "cubic interpolation", "Median Deinterlacer", "FFMpeg Deinterlacer"
- x264: support for '--subme 11' (requires x264 rev 2037+)
- x264: 'MediaInfo - import' allows to import the 'Encoding settings'-String MediaInfo shows for x264 encodes
- *cosmetics*
-
- rearranged Filter-Tab
- *fixed*
-
- problems crash when extracting subtitle from dvd/blu-ray source
- *fixed*
-
- crash when extracting subtitle from DVD source
- *fixed*
-
- problem when tsMuxeR output
- *fixed*
-
- crash when importing .mkvs with multiple chapter sets (now the last one will be imported)
- subtitle handling for multiInput
- multiple stream source srt->ttxt
- *fixed*
-
- don't create output file in the 1st pass of a two pass encoding
- add missing chapter DataNodes on some input files without chapters
- *fixed*
-
- x264 encoding progress indication
- *cosmetics*
-
- video profiles import (bitrate adjustment)
- *fixed*
-
- when extraction Audio with tsMuxeR audio was moved to Hybrid home on rename :(
- cuda: force AVC Level 'auto' for 'cq'-encoding mode
- *cosmetics*
-
- reworked the internal message system
- *fixed*
-
- x264: 2pass 1st pass calls not generated
- video passthrough/extraction bug
- *cosmetics*
-
- changed progress indication in title/taskbar
- Win7 32bit: progress in taskbar - accidentally build I didn't build the last Win32Bit build with Windows XP, not Windows 7
- *changed*
-
- added warning when output path equals program folder, when adding a job
- allow vc-1 in m2ts container
- extract videostream from blu-ray before reencoding (add additional overhead, but fixes synch problems when mpls spans over multiple files)
- *added*
-
- using mp4fpsmod to extract mp4 timecodes (http://sites.google.com/site/qaacpage/junk)
- *fixed*
-
- a bunch of problems related to separate 2pass 1st and 2pass 2nd pass encoding
- autocorp: handling of raw h.264
- error popup when adjusting preset an bluray restrictions enabled,..
- problem with .mpls and autocrop
- missing color space conversion when changing frame rate and not doing any other filtering
- problem when extracting/importing chapters from non-dvd sources
- filtermodel not completely ignored when using passthrough
- fps of input ignored if video handling was set to 'passthrough' on input load and then changed to something else before adding a job
- adding -tmp TempPath to MP4Box muxing call to make sure that the right temp folder is used
- .dts-hd/.dtshd not detected as raw audio
- blu-ray synch problem, see *changed*
- *fixed*
-
- x264: broke 1pass modes when I added 2pass crf again
- *fixed*
-
- aspectRatio in cropView
- Blu-ray autoCrop
- Blu-ray chapter list import
- cropView WASD
- small memory leak
- Win7 32bit: x264 progress indication
- *changed*
-
- autoCrop
- *added*
-
- x264: 2pass crf support again
- autocrop: option to set how many frames are analysed
- *fixed*
-
- mkvextract: removed '--raw' from extraction cl
- problem when importing chapters
- *changed*
-
- frameCounter: limit buffer to 20MB + better frame detection
- *added*
-
- win7/vista: show progress in taskbar
- hibernate as an additional option on queue finished
- *updated*
-
- windows packages: frameCounter
- *fixed*
-
- error when detecting if Hybrid homePath is writeable
- *updated*
-
- windows packages: mp4box, frameCounter and x264
- *cosmetics*
-
- added Hybrid type (windows32/windows64/linux32/linux64/macosx64) to debug output
- tweaked autocrop to only scan the first frame rate of I-frames
- moved 'Configuration' selection below tabs in video configuration tabs
- image- instead of text-buttons in Jobs-register and small redesign, thanks to Faust
- some small rearrangements here and there
- *changed*
-
- x264: on separate '2pass - 1st pass', call x264 with '--output NUL'
- jobs get now saved on Hybrid close and automatically loaded on Hybrid start
- *added*
-
- option to let Hybrid auto select a audio/subtitle stream with a specific language
- *fixed*
-
- a crash with autoloading audio for raw video
- initialization of tools for loaded jobs
- 'set absolute path' (only replace first occurrence of toReplace term)
- a bunch of problems related to separate 2pass 1st and 2pass 2nd pass encoding
- *added*
-
- "Use '--fullraw' when extracting with mkvextract" option, which allows to use '--fullraw' instead of '--raw' when using mkvextract
- first Mac OS X release (experimental -> need feedback)
- *cosmetics*
-
- windows: added version info to .exe description
- *adjusted*
-
- to alternative mplayer identify infos
- x264: add '--bluray-compat' when blu-ray compliance is activated
- x264: removed '--open gop' sub options
- *fixed*
-
- accidentally permanently deactivated DebugOutput ;)
- handling mp4 files: not using MP4Box but ffmpeg for stream extractions
- crash when using 'Postpone' was called on a job which hadn't been assigned to a client yet.
- *requirements*
-
- x264: needs to be rev1936 or newer now
- *updated*
-
- windows packages: updated tools, added Windows installer, switched to 7z archives
History info: First Hybrid release was 20091205, first public alpha of sx264 - predecessor of Hybrid - was 20081209